McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    33 Products

    Live Centers

    Image of Product. Side1 orientation. Contains Annotated. Lathe Centers. Live Centers, Bull-Nose Point.

    Bull-Nose Point

    Keep your workpiece spinning while staying supported when machining. These live centers spin with your piece to reduce friction between their point and your material. For smooth rotation, these centers turn on lubricated bearings. The bearings are enclosed to protect against chips and liquid. With a hardened body and point for extra strength and wear resistance, these live centers will hold up, use after use. Use them in the tailstock with manual or CNC lathes.
    Bull-Nose Point—Bull-nose point centers have a wide head to hold large-diameter hollow pipe and tubing. Choose an 80° point angle for more contact area and less vibration than a 60° point angle.
    High Speed—High-speed centers for pipe and tubing are rated to twice the speed as standard centers.
    Total Indicated Runout (TIR) Accuracy—TIR (total indicated runout) is a measure of rotational smoothness—the lower the value, the less wobble a rotating tool will have and the more accurate it will be.
    Machine
    Taper No.
    Max. Workpiece
    Cap., lb.
    Max. Rotation
    Speed, rpm
    Total Indicated Runout
    (TIR) Accuracy
    Point
    Dia.
    Point
    Lg.
    Overall
    Lg.
    Point
    Angle
    Material
    Each
    Bull-Nose Point
     
    Lathe Centers
    Morse 22,0002,5000.00015"4"3 29/32"6 27/32"60°Hardened Steel00000000000000
    Morse 33,8002,5000.00015"4"3 29/32"7 15/32"60°Hardened Steel0000000000000
    Morse 41,7603,0000.0001"4.921"2 1/4"7 9/32"80°Hardened Steel0000000000000
    Morse 44,8002,5000.00015"4"3 29/32"8 11/32"60°Hardened Steel0000000000000
    Morse 53,5202,0000.0001"5.906"2 3/4"8 29/32"80°Hardened Steel000000000000000
    Morse 54,8002,5000.00015"4"3 29/32"9 15/32"60°Hardened Steel0000000000000
     
    High Speed
    Morse 32,7007,0000.0001"3.5"2 5/32"6 31/32"60°Hardened Steel0000000000000
    Morse 44,0006,0000.0001"4.5"3 1/64"9 7/16"60°Hardened Steel000000000000000
    Morse 54,0006,0000.0001"4.5"3 1/64"10 37/64"60°Hardened Steel000000000000000
     

    Interchangeable Point Lathe Centers

    Mix and match points and bodies to create a lathe center that suits your job. Use an extractor (sold separately) to remove a point and swap in a new one.
    Center Points
    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Centers, Center Points, Bull-Nose Point.

    Bull-Nose Point

    Bull-Nose Point— Bull-nose points have a wide head for holding hollow workpieces with large diameters. They’re often used with pipes and tubes.
    Live—Live centers sit in the tailstock to support the end of a workpiece. They spin with the workpiece to reduce friction between the tip and the material. For smooth rotation, these centers turn on lubricated bearings. The bearings are sealed to protect against chips and liquid, which extends the life of the tool.
    Precision—Precision live centers wobble less than standard live centers for three to five times greater accuracy as they spin.
    For Machine
    Taper No.
    Point
    Dia.
    Point Tip
    Dia.
    Point
    Lg.
    Point
    Angle
    Material
    Each
    Bull-Nose Point
     
    Live
    Morse 20.59"3/64"19/32"60°Steel0000000000000
    Morse 20.87"1/8"19/32"90°Steel000000000000
    Morse 21.46"23/32"19/32"90°Steel000000000000
    Morse 30.79"3/64"7/8"60°Steel000000000000
    Morse 31.42"15/64"7/8"90°Steel000000000000
    Morse 32.48"1 19/64"7/8"90°Steel000000000000
    Morse 40.98"3/32"63/64"60°Steel000000000000
    Morse 41.77"25/64"63/64"90°Steel000000000000
    Morse 42.76"1 3/8"63/64"90°Steel000000000000
    Morse 51.26"3/32"1 3/16"60°Steel000000000000
    Morse 52.2"35/64"1 3/16"90°Steel000000000000
    Morse 53.15"1 1/2"1 3/16"90°Steel000000000000
    Morse 61.42"5/32"1 27/64"60°Steel000000000000
    Morse 62.76"23/32"1 27/64"90°Steel000000000000
    Morse 63.94"1 31/32"1 27/64"90°Steel0000000000000
     
    Precision Live and Dead
    Morse 2, Morse 31.75"7/8"1 11/64"60°Steel0000000000000
    Morse 42.25"1"1 35/64"60°Steel0000000000000
    Morse 52.75"1 1/2"1 37/64"60°Steel0000000000000
     

    Dead Centers

    Image of Product. Side1 orientation. Contains Annotated. Lathe Centers. Dead Centers, Bull-Nose Point.

    Bull-Nose Point

    Insert these in your headstock to support your workpiece when machining between centers. Unlike live centers, dead centers don’t spin freely, so they give you a fixed point to stabilize your material. You can also use them in the tailstock to support the end of the workpiece when friction isn’t a concern. Made of through-hardened 52100 alloy steel—a material originally developed for bearings—these centers have exceptional hardness, strength, and wear resistance. That means you'll have to replace them less often than centers made of low-quality steel. You can also apply high-pressure grease on the point to reduce friction and wear.
    Bull-Nose Point—Bull-nose centers are ideal for hollow workpieces such as pipe and tubing.
    Carbide-Tipped Steel—Carbide-tipped hardened steel dead centers have better wear resistance than hardened steel dead centers. They’re ideal for high-volume work and holding highly abrasive and hard materials.
    Steel
    Carbide-Tipped
    Steel
    Machine
    Taper No.
    Point
    Dia.
    Point Tip
    Dia.
    Point
    Lg.
    Overall
    Lg.
    Total Indicated Runout
    (TIR) Accuracy
    Each
    Each
    Bull-Nose Point
    Morse 22.13"1/2"2 13/32"5"0.00005"00000000000000———0
    Morse 32.75"1"2 33/64"5 3/4"0.00005"00000000000000000000000000000
    Morse 42.75"1"2 33/64"6 9/16"0.00005"0000000000000000000000000000
    Morse 53.5"1"3 11/64"8 3/8"0.00005"0000000000000———0
     
    back to top