Lathe Chucks
Mount these chucks to a lathe's spindle to hold round workpieces. Also known as scroll chucks, they are self centering—all jaws move in unison, centering the workpiece as they close. Made of forged steel, these chucks are strong and wear resistant, so they maintain their shape even with continuous use. They’re often used for precision machining. You can run them at higher speeds than cast iron chucks, and they’ll last longer. Use the included lathe chuck wrench to open and close the jaws.
Chucks with fixed jaws come with one set of outside jaws and one set of inside jaws. These jaws are one-piece and keyed, so they’re best for rigid and permanent setups where you don’t need to change your jaw style. They’re commonly used in dedicated turning operations or roughing applications.
Use high-pressure grease to improve grip and prolong the life of your chuck.
A mounting plate (sold separately) is required to mount the chuck to a lathe. Select a mounting plate that matches the diameter of the lathe chuck, your lathe’s spindle type, and the spindle OD.
Lathe Chucks | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Workpiece | Replacement Inside Jaw Set | Replacement Outside Jaw Set | High-Pressure Grease (13.7 fl. oz.) | ||||||||||||
| Dia. | OD | ID | Center Through-Hole Dia. | TIR (Total Indicated Runout) Accuracy | Max. Speed, rpm | Material | Includes | Each | Each | Each | Each | ||||
3 Jaws | |||||||||||||||
| 3" | 0.08"-2.72" | 0.98"-2.8" | 0.63" | 0.0006" | 7,000 | Steel | One Set of Solid Inside Jaws, One Set of Solid Outside Jaws, Self-Ejecting Lathe Chuck Wrench, Hex Key, Mounting Bolts, Adjustment Screws | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 000000 |
For Spindle | For Spindle Nose | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Type | OD | Size | Type | Dia. | Lg. | Center Through-Hole Dia. | Material | Each | |
For 3" Lathe Chuck Dia. | |||||||||
| D1 Camlock | 3.622" | 3 | D1-3 | 2 1/8" | 7/16" | 1" | Steel | 0000000 | 0000000 |
Economy Lathe Chucks
Choose these lathe chucks when high precision isn’t critical. Made of cast iron, they don't match up to the same tight tolerances as forged steel lathe chucks. This means they are only rated to half the maximum speed, so they may wobble at high speeds. Also known as scroll chucks, they are self-centering—all three jaws move together, centering the workpiece as they close. Use the included lathe chuck wrench to open and close the jaws. You’ll need a mounting plate (not included) to connect these chucks to your lathe.
Fixed jaw lathe chucks come with a set of inside and outside jaws.
High-pressure grease (sold separately) improves grip and prolongs the life of your lathe chuck.
Lathe Chucks | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Workpiece | Replacement Inside Jaw Set | Replacement Outside Jaw Set | ||||||||||||
| Dia. | OD | ID | Center Through-Hole Dia. | TIR (Total Indicated Runout) Accuracy | Max. Speed, rpm | Number of Jaws | Material | Includes | Each | Each | Each | |||
| 3" | 0.08"-0.87" | 0.98"-2.76" | 0.63" | 0.0002" | 4,000 | 3 | Cast Iron | One Set of Solid Inside Jaws, One Set of Solid Outside Jaws, Self-Ejecting Lathe Chuck Wrench | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 000000 |
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade  | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Weld Load, kgf | Color | Each | |
DuPont Molykote G-4700 Extreme Pressure Synthetic—Lithium Thickener | ||||||||||
| 2 | Synthetic | Moly | 13.7 | Grease Gun Cartridge | -40° to 350° | 545° | 375 | Black | 0000000 | 000000 |
5C Collet to Lathe Chuck Adapters
No need to break down a collet set up when a workpiece doesn't fit a 5C collet. Install one of these lathe chuck adapters in your 5C collet chuck or holder and its three jaws will securely grasp the workpiece. These chuck adapters are self centering—all three jaws move in unison, centering the workpiece as they close. Use the included lathe chuck wrench to open and close the jaws.
For Workpiece | Lg. | Thread Size | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | OD | ID | Head | Shaft | O'all | Center Through-Hole Dia. | Internal | External | Material | Includes | Each | |
| 3" | 5/64"-2 15/32" | 63/64"-2 3/4" | 2 41/64" | 3 13/32" | 6 3/64" | 5/8" | 7/8"-20 | 1.238"-20 | Hardened Steel | One Set of Solid Outside-Grip Jaws, One Set of Solid Inside-Grip Jaws, Lathe Chuck Wrench | 00000000 | 0000000 |
Lathe Chuck to 5C Collet Adapters
When a job calls for a 5C collet, save time by using an adapter instead of removing your lathe chuck. The adapter fits most lathe chucks. Install a 5C collet into the adapter and secure it by turning the lock with the included hex key.
| Dia. | Lg. | Material | Each | |
| 3" | 3 1/2" | Hardened Steel | 0000000 | 0000000 |
Three-Wheel Lathe Knurling Tools and Holders
Press uniform, high-precision knurls into parts with minimal pressure. These tools are good for small-diameter or long parts because they use less pressure than one- and two-wheel knurling tools, which can bend the part. The adjustable scroll gear supports a range of workpiece diameters. The knurls have smooth, rounded teeth. They distribute pressure evenly to maintain quality and efficiency—even in high-volume production runs. Use them in CNC lathes, turret lathes, and automatic screw machines. Pair them with a holder (sold separately) to fit your lathe.
Teeth per inch (TPI) determines how fine your pattern is. The higher the number, the smoother, more closely spaced your pattern will be. A tool handle is usually knurled with 30 TPI.
Knurling Tools | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Workpiece Size | Knurl | Replacement Pin Sets | ||||||||||||||
| Min. | Max. | Dia. | Lg. | Material | No. of Knurling Wheels | Dia. | Face Wd. | Hole Dia. | Face Type | Material | Includes | For Use On | Each | Each | ||
Forming | ||||||||||||||||
| 1/8" | 1" | 3" | 1 1/2" | Steel | 3 | 1/2" | 1/4" | 1/4" | Bevel | High-Speed Tool Steel | Two Right-Hand Spiral Pattern Knurls (30 Teeth per Inch) One Left-Hand Spiral Pattern Knurl (30 Teeth per Inch) | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 00000000 | 000000000 | 00000000 | 000000 |
| Dia. | Face Wd. | Hole Dia. | Knurl Face Type | Material | Finish | For Use On | Teeth Per Inch | Each | |
Right-Hand Spiral | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Forming | |||||||||
| 1/2" | 1/4" | 1/4" | Bevel | High-Speed Tool Steel | Titanium Nitride (TiN) Coated | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 00000000 | 000000 |
Left-Hand Spiral | |||||||||
Forming | |||||||||
| 1/2" | 1/4" | 1/4" | Bevel | High-Speed Tool Steel | Titanium Nitride (TiN) Coated | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Titanium | 30 | 00000000 | 00000 |