Filter by
For Use On
System of Measurement
Insert Code
Insert Designation
Cut Type
Material
Finish
Cutting Edge Length
For Cutting Conditions
Manufacturer
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Lathe Tool Inserts for Multiple Materials
CCMT (Diamond with 80° Nose Angle)—For SCLC Holders
 |  |
 |
Clear Plastic Case |
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Titanium Aluminum Nitride (TiAlN) Coated—Inserts with a titanium aluminum nitride (TiAlN) coating dissipate heat well, especially at high speeds. The coating reacts to high temperatures by forming a layer of aluminum oxide. This layer transfers heat to the chips, so the tool stays cool even without lubrication.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| CCMT-21.50.5 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.25" | 0.008" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N127 | 000000 | 10 | 3867N35 | 0000000 | ||
| CCMT-21.51 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.24" | 1/64" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N135 | 00000 | 10 | 3867N382 | 000000 | ||
| CCMT-21.51 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.24" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N128 | 00000 | 10 | 3867N354 | 000000 | ||
| CCMT-21.52 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.22" | 1/32" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N131 | 00000 | 10 | 3867N374 | 000000 | ||
| CCMT-21.52 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.22" | 1/32" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N129 | 00000 | 10 | 3867N373 | 000000 | ||
| CCMT-32.50.5 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.38" | 0.008" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N132 | 00000 | 10 | 3867N375 | 000000 | ||
| CCMT-32.51 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.37" | 1/64" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N136 | 00000 | 10 | 3867N386 | 000000 | ||
| CCMT-32.51 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.37" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N133 | 00000 | 10 | 3867N376 | 000000 | ||
| CCMT-32.52 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.35" | 1/32" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N137 | 00000 | 10 | 3867N387 | 000000 | ||
| CCMT-32.52 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.35" | 1/32" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N134 | 00000 | 10 | 3867N38 | 000000 | ||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| CCMT-21.50.5 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.25" | 0.008" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A177 | 00000 | 10 | 3244A239 | 000000 | ||
| CCMT-21.51 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.24" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A775 | 00000 | 10 | 3244A86 | 000000 | ||
| CCMT-21.52 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.22" | 1/32" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A782 | 00000 | 10 | 3244A897 | 000000 | ||
| CCMT-32.50.5 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.37" | 0.008" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A182 | 00000 | 10 | 3244A245 | 000000 | ||
CDHB (Diamond with 80° Nose Angle)—For CCBI, CCBM, CSBI, and CSBM Holders
 |  |
|
Clear Plastic Case |
Inserts without chipbreakers are best for making shallow cuts or for finishing surfaces.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Individual | Package | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, and Titanium | |||||||||||||||||||
For Interrupted Cutting Conditions | |||||||||||||||||||
| CDHB-1.20.60.5 | Uncoated | 5/32" | 3/64" | 0.084" | 0.16" | 0.007" | Positive | Finishing | — | Widia | Clear Plastic Case | 1 | 3867N615 | 000000 | 10 | 3867N626 | 0000000 | ||
| CDHB-1.20.60.5 | Titanium Nitride (TiN) Coated | 5/32" | 3/64" | 0.084" | 0.16" | 0.007" | Positive | Finishing | PVD (Physical Vapor Deposition) | Widia | Clear Plastic Case | 1 | 3867N611 | 00000 | 10 | 3867N622 | 000000 | ||
CDHH (Diamond with 80° Nose Angle)—For CCBI, CCBM, CSBI, and CSBM Holders
 | |
|
Clear Plastic Case |
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, and Titanium | |||||||||||||||||||
For Interrupted Cutting Conditions | |||||||||||||||||||
| CDHH-1.20.60.5 | Uncoated | 5/32" | 3/64" | 0.084" | 0.16" | 0.007" | Positive | Finishing | Chip Breakers | Widia | Clear Plastic Case | 1 | 3867N619 | 000000 | 5 | 3867N631 | 000000 | ||
CDHH (Diamond with 80° Nose Angle)—For CCBI and CSBI Holders
| |
|
Clear Plastic Case |
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| CDHH-1.20.60.5 | Titanium Nitride (TiN) Coated | 5/32" | 3/64" | 0.084" | 0.16" | 0.007" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Widia | Clear Plastic Case | 1 | 3315A51 | 000000 | 10 | 3315A227 | 0000000 | ||
CNGG (Diamond with 80° Nose Angle)—For DCLN and MCLN Holders
 |  |
|
Clear Plastic Case |
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Titanium Aluminum Nitride (TiAlN) Coated—Inserts with a titanium aluminum nitride (TiAlN) coating dissipate heat well, especially at high speeds. The coating reacts to high temperatures by forming a layer of aluminum oxide. This layer transfers heat to the chips, so the tool stays cool even without lubrication.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Brass, Bronze, Copper, Nickel, Plastic, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| CNGG-431 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.33" | 1/64" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N138 | 000000 | 10 | 3867N389 | 0000000 | ||
| CNGG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.33" | 1/32" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N139 | 00000 | 10 | 3867N391 | 000000 | ||
CNMG (Diamond with 80° Nose Angle)—For DCLN and MCLN Holders
 | |
|
Clear Plastic Case |
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | |||||||||||||||||||
For Interrupted Cutting Conditions | |||||||||||||||||||
| CNMG-431 | Uncoated | 1/2" | 3/16" | 0.203" | 0.49" | 1/64" | Negative | Medium | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A877 | 000000 | 10 | 3244A954 | 0000000 | ||
| CNMG-543 | Uncoated | 5/8" | 1/4" | 1/4" | 0.59" | 3/64" | Negative | Medium | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A887 | 00000 | 10 | 3244A96 | 000000 | ||
CNMG (Diamond with 80° Nose Angle)—For DCLN, MCLN, and MCRN Holders
|
|
|
Clear Plastic Case |
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Titanium Aluminum Nitride (TiAlN) Coated—Inserts with a titanium aluminum nitride (TiAlN) coating dissipate heat well, especially at high speeds. The coating reacts to high temperatures by forming a layer of aluminum oxide. This layer transfers heat to the chips, so the tool stays cool even without lubrication.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Roughing Cutting Operation—Roughing inserts are used for removing material quickly when surface finish isn’t a concern.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| CNMG-431 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.49" | 1/64" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A665 | 000000 | 10 | 3244A576 | 0000000 | ||
| CNMG-432 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.48" | 1/32" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A671 | 00000 | 10 | 3244A583 | 000000 | ||
| CNMG-433 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.46" | 3/64" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A676 | 00000 | 10 | 3244A589 | 000000 | ||
| CNMG-542 | Uncoated | 5/8" | 1/4" | 1/4" | 0.6" | 1/32" | Negative | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A681 | 00000 | 10 | 3244A591 | 000000 | ||
| CNMG-543 | Titanium Nitride (TiN) Coated | 5/8" | 1/4" | 1/4" | 0.59" | 3/64" | Negative | Roughing | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A688 | 00000 | 10 | 3244A597 | 000000 | ||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| CNMG-542 | Titanium Aluminum Nitride (TiAlN) Coated | 5/8" | 1/4" | 1/4" | 0.6" | 1/32" | Negative | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A683 | 00000 | 10 | 3244A593 | 000000 | ||
DCMT (Diamond with 55° Nose Angle)—For SDJC Holders
 |  |
|
Clear Plastic Case |
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Titanium Aluminum Nitride (TiAlN) Coated—Inserts with a titanium aluminum nitride (TiAlN) coating dissipate heat well, especially at high speeds. The coating reacts to high temperatures by forming a layer of aluminum oxide. This layer transfers heat to the chips, so the tool stays cool even without lubrication.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| DCMT-21.50.5 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.3" | 0.008" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A186 | 000000 | 10 | 3244A248 | 0000000 | ||
| DCMT-21.51 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.29" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A801 | 00000 | 10 | 3244A907 | 000000 | ||
| DCMT-21.52 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.27" | 1/32" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A807 | 00000 | 10 | 3244A913 | 000000 | ||
For Use On Brass, Bronze, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| DCMT-21.51 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.29" | 1/64" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N143 | 00000 | 10 | 3867N412 | 000000 | ||
| DCMT-32.51 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.44" | 1/64" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N144 | 00000 | 10 | 3867N419 | 000000 | ||
| DCMT-32.51 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.44" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N141 | 00000 | 10 | 3867N392 | 000000 | ||
| DCMT-32.52 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.43" | 1/32" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N145 | 00000 | 10 | 3867N421 | 000000 | ||
| DCMT-32.52 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.43" | 1/32" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N142 | 00000 | 10 | 3867N406 | 000000 | ||
DNMG (Diamond with 55° Nose Angle)—For DDJN, MDJN, and MDPN Holders
 |  | |
Clear Plastic Case |
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| DNMG-431 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.59" | 1/64" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A701 | 000000 | 10 | 3244A629 | 0000000 | ||
| DNMG-432 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.58" | 1/32" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A706 | 00000 | 10 | 3244A65 | 000000 | ||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| DNMG-431 | Uncoated | 1/2" | 3/16" | 0.203" | 0.59" | 1/64" | Positive | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A698 | 00000 | 10 | 3244A628 | 000000 | ||
For Use On Brass, Bronze, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| DNMG-431 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.59" | 1/64" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N146 | 00000 | 10 | 3867N425 | 000000 | ||
| DNMG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.58" | 1/32" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N147 | 00000 | 10 | 3867N428 | 000000 | ||
RNMG (Round)—For MRGN Holders
 |  | |
Clear Plastic Case |
Inserts without chipbreakers are best for making shallow cuts or for finishing surfaces.
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
Individual | Package | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Rake Angle Type | For Cutting Operation | Coating Process | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | |||||||||||||||||
For Semi-Interrupted Cutting Conditions | |||||||||||||||||
| RNMG-43 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | Negative | Medium | CVD (Chemical Vapor Deposition) | Sandvik Coromant | Clear Plastic Case | 1 | 3244A143 | 000000 | 10 | 3244A15 | 0000000 | ||
SCMT (Square with 90° Nose Angle)—For SSDC Holders
 |  |
|
Clear Plastic Case |
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Titanium Aluminum Nitride (TiAlN) Coated—Inserts with a titanium aluminum nitride (TiAlN) coating dissipate heat well, especially at high speeds. The coating reacts to high temperatures by forming a layer of aluminum oxide. This layer transfers heat to the chips, so the tool stays cool even without lubrication.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| SCMT-32.51 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.36" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A863 | 000000 | 10 | 3244A944 | 0000000 | ||
| SCMT-32.52 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.34" | 1/32" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A871 | 00000 | 10 | 3244A948 | 000000 | ||
For Use On Brass, Bronze, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| SCMT-32.51 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.38" | 1/64" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N149 | 00000 | 10 | 3867N437 | 000000 | ||
| SCMT-32.51 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.38" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N148 | 00000 | 10 | 3867N431 | 000000 | ||
SNMG (Square with 90° Nose Angle)—For DSDN and MSDN Holders
 |
 |
|
Clear Plastic Case |
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Titanium Aluminum Nitride (TiAlN) Coated—Inserts with a titanium aluminum nitride (TiAlN) coating dissipate heat well, especially at high speeds. The coating reacts to high temperatures by forming a layer of aluminum oxide. This layer transfers heat to the chips, so the tool stays cool even without lubrication.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| SNMG-322 | Uncoated | 3/8" | 1/8" | 0.15" | 0.34" | 1/32" | Negative | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A146 | 000000 | 10 | 3244A16 | 0000000 | ||
| SNMG-432 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.47" | 1/32" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A764 | 00000 | 10 | 3244A8 | 000000 | ||
| SNMG-643 | Uncoated | 3/4" | 1/4" | 0.312" | 0.7" | 3/64" | Negative | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A151 | 00000 | 10 | 3244A17 | 000000 | ||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| SNMG-431 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.48" | 1/64" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A754 | 00000 | 10 | 3244A76 | 000000 | ||
For Use On Brass, Bronze, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| SNMG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.47" | 1/32" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N151 | 00000 | 10 | 3867N438 | 000000 | ||
SPG (Square with 90° Nose Angle)—For CSBP Holders
 |  |
|
Clear Plastic Case |
Inserts without chipbreakers are best for making shallow cuts or for finishing surfaces.
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Individual | Package | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | |||||||||||||||||
For Semi-Interrupted Cutting Conditions | |||||||||||||||||
| SPG-322 | Uncoated | 3/8" | 1/8" | 0.34" | 1/32" | Positive | Finishing | Sandvik Coromant | Clear Plastic Case | 1 | 3244A189 | 000000 | 10 | 3244A25 | 0000000 | ||
| SPG-422 | Uncoated | 1/2" | 1/8" | 0.47" | 1/32" | Positive | Finishing | Sandvik Coromant | Clear Plastic Case | 1 | 3244A192 | 00000 | 10 | 3244A28 | 000000 | ||
TCMT (Triangle with 60° Nose Angle)—For STAC, STEC, STNC, and STUC Holders
 |
 |
|
Clear Plastic Case |
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Titanium Aluminum Nitride (TiAlN) Coated—Inserts with a titanium aluminum nitride (TiAlN) coating dissipate heat well, especially at high speeds. The coating reacts to high temperatures by forming a layer of aluminum oxide. This layer transfers heat to the chips, so the tool stays cool even without lubrication.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Roughing Cutting Operation—Roughing inserts are used for removing material quickly when surface finish isn’t a concern.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| TCMT-21.50.5 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.41" | 0.008" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A195 | 000000 | 10 | 3244A29 | 0000000 | ||
| TCMT-21.51 | Titanium Aluminum Nitride (TiAlN) Coated | 1/4" | 3/32" | 0.11" | 0.41" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A889 | 00000 | 10 | 3244A961 | 000000 | ||
| TCMT-21.52 | Titanium Nitride (TiN) Coated | 1/4" | 3/32" | 0.11" | 0.39" | 1/32" | Positive | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A891 | 00000 | 10 | 3244A963 | 000000 | ||
| TCMT-32.51 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.63" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A849 | 00000 | 10 | 3244A936 | 000000 | ||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| TCMT-21.50.5 | Uncoated | 1/4" | 3/32" | 0.11" | 0.41" | 0.008" | Positive | Finishing | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A196 | 00000 | 10 | 3244A3 | 000000 | ||
| TCMT-21.51 | Uncoated | 1/4" | 3/32" | 0.11" | 0.41" | 1/64" | Positive | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A841 | 00000 | 10 | 3244A932 | 000000 | ||
For Use On Aluminum, Brass, Bronze, Copper, Nickel, Plastic, Steel, and Titanium | ||||||||||||||||||||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| TCMT-21.51 | Uncoated | 1/4" | 3/32" | 0.11" | 0.41" | 1/64" | Positive | Roughing | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N152 | 00000 | 10 | 3867N443 | 000000 | ||
For Use On Brass, Bronze, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| TCMT-32.51 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.63" | 1/64" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N153 | 00000 | 10 | 3867N447 | 000000 | ||
| TCMT-32.52 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 5/32" | 0.173" | 0.62" | 1/32" | Positive | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N154 | 00000 | 10 | 3867N454 | 000000 | ||
TDHB (Triangle with 60° Nose Angle)—For FCBI, FCBM, FSBI, FSBM, and FSRI Holders
 |  |
|
Clear Plastic Case |
Inserts without chipbreakers are best for making shallow cuts or for finishing surfaces.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Individual | Package | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, and Titanium | |||||||||||||||||||
For Interrupted Cutting Conditions | |||||||||||||||||||
| TDHB-1.30.80.5 | Uncoated | 5/32" | 3/64" | 0.095" | 0.28" | 0.007" | Positive | Finishing | — | Widia | Clear Plastic Case | 1 | 3867N616 | 000000 | 5 | 3867N627 | 000000 | ||
| TDHB-1.30.80.5 | Titanium Nitride (TiN) Coated | 5/32" | 3/64" | 0.095" | 0.28" | 0.007" | Positive | Finishing | PVD (Physical Vapor Deposition) | Widia | Clear Plastic Case | 1 | 3867N612 | 00000 | 10 | 3867N623 | 000000 | ||
TDHH (Triangle with 60° Nose Angle)—For FCBI and FSBI Holders
 | |
|
Clear Plastic Case |
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| TDHH-1.30.80.5 | Titanium Nitride (TiN) Coated | 5/32" | 3/64" | 0.095" | 0.28" | 0.007" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Widia | Clear Plastic Case | 1 | 3315A52 | 000000 | 10 | 3315A286 | 0000000 | ||
TNMG (Triangle with 60° Nose Angle)—For DTGN, DTJN, MTAN, MTEN, MTGN, and MTJN Holders
 |
 |
|
Clear Plastic Case |
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Titanium Aluminum Nitride (TiAlN) Coated—Inserts with a titanium aluminum nitride (TiAlN) coating dissipate heat well, especially at high speeds. The coating reacts to high temperatures by forming a layer of aluminum oxide. This layer transfers heat to the chips, so the tool stays cool even without lubrication.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| TNMG-321 | Titanium Nitride (TiN) Coated | 3/8" | 1/8" | 0.15" | 0.63" | 1/64" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A707 | 000000 | 10 | 3244A654 | 0000000 | ||
| TNMG-322 | Titanium Nitride (TiN) Coated | 3/8" | 1/8" | 0.15" | 0.62" | 1/32" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A709 | 00000 | 10 | 3244A655 | 000000 | ||
| TNMG-331 | Uncoated | 3/8" | 3/16" | 0.15" | 0.63" | 1/64" | Negative | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A156 | 00000 | 10 | 3244A216 | 000000 | ||
| TNMG-332 | Titanium Nitride (TiN) Coated | 3/8" | 3/16" | 0.15" | 0.62" | 1/32" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A717 | 00000 | 10 | 3244A657 | 000000 | ||
| TNMG-431 | Uncoated | 1/2" | 3/16" | 0.203" | 0.85" | 1/64" | Negative | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A724 | 00000 | 10 | 3244A66 | 000000 | ||
| TNMG-431 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.85" | 1/64" | Negative | Finishing | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A718 | 00000 | 10 | 3244A658 | 000000 | ||
| TNMG-432 | Uncoated | 1/2" | 3/16" | 0.203" | 0.83" | 1/32" | Negative | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A884 | 00000 | 10 | 3244A957 | 000000 | ||
| TNMG-433 | Uncoated | 1/2" | 3/16" | 0.203" | 0.82" | 3/64" | Negative | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A161 | 00000 | 10 | 3244A218 | 000000 | ||
| TNMG-434 | Uncoated | 1/2" | 3/16" | 0.203" | 0.8" | 1/16" | Negative | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A165 | 00000 | 10 | 3244A227 | 000000 | ||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| TNMG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.83" | 1/32" | Negative | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A726 | 00000 | 10 | 3244A67 | 000000 | ||
For Use On Brass, Bronze, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| TNMG-331 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 3/16" | 0.15" | 0.63" | 1/64" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N155 | 00000 | 10 | 3867N455 | 000000 | ||
| TNMG-332 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 3/16" | 0.15" | 0.61" | 1/32" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N156 | 00000 | 10 | 3867N458 | 000000 | ||
TPG (Triangle with 60° Nose Angle)—For CTAP, CTCO, and CTFP Holders
 |  |
|
Clear Plastic Case |
Inserts without chipbreakers are best for making shallow cuts or for finishing surfaces.
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Individual | Package | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | |||||||||||||||||
For Semi-Interrupted Cutting Conditions | |||||||||||||||||
| TPG-221 | Uncoated | 1/4" | 1/8" | 0.42" | 1/64" | Positive | Finishing | Sandvik Coromant | Clear Plastic Case | 1 | 3244A197 | 000000 | 10 | 3244A31 | 0000000 | ||
| TPG-222 | Uncoated | 1/4" | 1/8" | 0.4" | 1/32" | Positive | Finishing | Sandvik Coromant | Clear Plastic Case | 1 | 3244A198 | 00000 | 10 | 3244A32 | 000000 | ||
| TPG-321 | Uncoated | 3/8" | 1/8" | 0.63" | 1/64" | Positive | Finishing | Sandvik Coromant | Clear Plastic Case | 1 | 3244A752 | 00000 | 10 | 3244A74 | 000000 | ||
| TPG-322 | Uncoated | 3/8" | 1/8" | 0.62" | 1/32" | Positive | Finishing | Sandvik Coromant | Clear Plastic Case | 1 | 3244A753 | 00000 | 10 | 3244A75 | 000000 | ||
TPHB (Triangle with 60° Nose Angle)—For QCBI, QCBM, QSBI, QSOI, QSRI, and STLP Holders
 |  |
|
Clear Plastic Case |
Inserts without chipbreakers are best for making shallow cuts or for finishing surfaces.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Individual | Package | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, and Titanium | |||||||||||||||||||
For Interrupted Cutting Conditions | |||||||||||||||||||
| TPHB-21.51 | Uncoated | 1/4" | 3/32" | 0.13" | 0.43" | 1/64" | Positive | Finishing | — | Widia | Clear Plastic Case | 1 | 3867N617 | 000000 | 10 | 3867N628 | 0000000 | ||
| TPHB-21.51 | Titanium Nitride (TiN) Coated | 1/4" | 3/32" | 0.13" | 0.43" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Widia | Clear Plastic Case | 1 | 3867N613 | 00000 | 10 | 3867N624 | 000000 | ||
TPHB (Triangle with 60° Nose Angle)—For SCBI, SDBM, SSBI, SSII, and SSOI Holders
| |
|
Clear Plastic Case |
Inserts without chipbreakers are best for making shallow cuts or for finishing surfaces.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Individual | Package | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, and Titanium | |||||||||||||||||||
For Interrupted Cutting Conditions | |||||||||||||||||||
| TPHB-321 | Uncoated | 3/8" | 1/8" | 0.13" | 0.65" | 1/64" | Positive | Finishing | — | Widia | Clear Plastic Case | 1 | 3867N618 | 000000 | 5 | 3867N629 | 000000 | ||
| TPHB-321 | Titanium Nitride (TiN) Coated | 3/8" | 1/8" | 0.13" | 0.65" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Widia | Clear Plastic Case | 1 | 3867N614 | 00000 | 10 | 3867N625 | 000000 | ||
TPHH (Triangle with 60° Nose Angle)—For QCBI and QSBI Holders
 | |
|
Clear Plastic Case |
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| TPHH-21.51 | Titanium Nitride (TiN) Coated | 1/4" | 3/32" | 0.13" | 0.43" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Widia | Clear Plastic Case | 1 | 3315A53 | 000000 | 10 | 3315A487 | 0000000 | ||
TPHH (Triangle with 60° Nose Angle)—For SCBI, SDBI, and SSBI Holders
| |
|
Clear Plastic Case |
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| TPHH-321LF | Titanium Nitride (TiN) Coated | 3/8" | 1/8" | 0.13" | 0.65" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Widia | Clear Plastic Case | 1 | 3315A54 | 000000 | 10 | 3315A669 | 0000000 | ||
TPHH (Triangle with 60° Nose Angle)—For SCBI, SDBM, SSBI, SSII, and SSOI Holders
| |
|
Clear Plastic Case |
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, and Titanium | |||||||||||||||||||
For Continuous Cutting Conditions | |||||||||||||||||||
| TPHH-321LF | Uncoated | 3/8" | 1/8" | 0.131" | 0.65" | 1/64" | Positive | Finishing | Chip Breakers | Widia | Clear Plastic Case | 1 | 3867N621 | 000000 | 10 | 3867N632 | 0000000 | ||
TPU (Triangle with 60° Nose Angle)—For CTAP, CTCO, and CTFP Holders
 |  |
|
Clear Plastic Case |
Inserts without chipbreakers are best for making shallow cuts or for finishing surfaces.
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Individual | Package | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | |||||||||||||||||
For Semi-Interrupted Cutting Conditions | |||||||||||||||||
| TPU-221 | Uncoated | 1/4" | 1/8" | 0.42" | 1/64" | Positive | Finishing | Sandvik Coromant | Clear Plastic Case | 1 | 3244A203 | 00000 | 10 | 3244A341 | 000000 | ||
| TPU-322 | Uncoated | 3/8" | 1/8" | 0.62" | 1/32" | Positive | Finishing | Sandvik Coromant | Clear Plastic Case | 1 | 3244A205 | 00000 | 10 | 3244A349 | 000000 | ||
| TPU-323 | Uncoated | 3/8" | 1/8" | 0.6" | 3/64" | Positive | Finishing | Sandvik Coromant | Clear Plastic Case | 1 | 3244A208 | 00000 | 10 | 3244A353 | 000000 | ||
| TPU-432 | Uncoated | 1/2" | 3/16" | 0.83" | 1/32" | Positive | Finishing | Sandvik Coromant | Clear Plastic Case | 1 | 3244A214 | 00000 | 10 | 3244A359 | 000000 | ||
VNMG (Diamond with 35° Nose Angle)—For MVJN and MVVN Holders
 |
 |
|
Clear Plastic Case |
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Titanium Aluminum Nitride (TiAlN) Coated—Inserts with a titanium aluminum nitride (TiAlN) coating dissipate heat well, especially at high speeds. The coating reacts to high temperatures by forming a layer of aluminum oxide. This layer transfers heat to the chips, so the tool stays cool even without lubrication.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| VNMG-331 | Uncoated | 3/8" | 3/16" | 0.15" | 0.64" | 1/64" | Negative | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A168 | 000000 | 10 | 3244A23 | 0000000 | ||
For Use On Brass, Bronze, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| VNMG-331 | Titanium Aluminum Nitride (TiAlN) Coated | 3/8" | 3/16" | 0.15" | 0.64" | 1/64" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N157 | 00000 | 10 | 3867N46 | 000000 | ||
WNMG (Trigon with 80° Nose Angle)—For DWLN and MWLN Holders
 |
 |
|
Clear Plastic Case |
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hex bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Uncoated—Uncoated inserts are sharper than coated inserts, so they leave a better finish on softer metals, such as aluminum. They’re good for general purpose cutting and short production runs.
Titanium Aluminum Nitride (TiAlN) Coated—Inserts with a titanium aluminum nitride (TiAlN) coating dissipate heat well, especially at high speeds. The coating reacts to high temperatures by forming a layer of aluminum oxide. This layer transfers heat to the chips, so the tool stays cool even without lubrication.
Titanium Nitride (TiN) Coated—Titanium nitride (TiN) coated inserts create less friction than uncoated inserts, so they last longer when run at similar speeds.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| WNMG-431 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.33" | 1/64" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A736 | 000000 | 10 | 3244A71 | 0000000 | ||
| WNMG-432 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.31" | 1/32" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A742 | 00000 | 10 | 3244A721 | 000000 | ||
| WNMG-433 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.29" | 3/64" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A748 | 00000 | 10 | 3244A73 | 000000 | ||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| WNMG-431 | Uncoated | 1/2" | 3/16" | 0.203" | 0.33" | 1/64" | Negative | Medium | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A734 | 00000 | 10 | 3244A7 | 000000 | ||
For Use On Brass, Bronze, Copper, Nickel, Plastic, Stainless Steel, Steel, and Titanium | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| WNMG-431 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.33" | 1/64" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N158 | 00000 | 10 | 3867N461 | 000000 | ||
| WNMG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.31" | 1/32" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3867N159 | 00000 | 10 | 3867N462 | 000000 | ||
Precision Lathe Tool Inserts for Stainless Steel and Heat-Resistant Super Alloys
CCGT (Diamond with 80° Nose Angle)—For ACLC, KSTB, and SCLC Holders
 |  | |
Individual Carbide Insert Case |
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Stainless Steel, Titanium, and Heat-Resistant Super Alloy | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| CCGT-21.50.2 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 3/32" | 0.11" | 0.25" | 0.004" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N11 | 000000 | 10 | 8881N31 | 0000000 | ||
| CCGT-21.50.5 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 3/32" | 0.11" | 0.25" | 0.008" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N12 | 00000 | 10 | 8881N32 | 000000 | ||
| CCGT-21.51 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 3/32" | 0.11" | 0.25" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N13 | 00000 | 10 | 8881N33 | 000000 | ||
| CCGT-32.50.2 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 3/8" | 5/32" | 0.173" | 0.38" | 0.004" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N14 | 00000 | 10 | 8881N34 | 000000 | ||
| CCGT-32.50.5 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 3/8" | 5/32" | 0.173" | 0.38" | 0.008" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N15 | 00000 | 10 | 8881N35 | 000000 | ||
| CCGT-32.51 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 3/8" | 5/32" | 0.173" | 0.38" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N16 | 00000 | 10 | 8881N36 | 000000 | ||
DCGT (Diamond with 55° Nose Angle)—For ADJC, KSTB, SDJC, SDLC, SDNC, SDQC, SDUC, and SDZC Holders
 | |
Individual Carbide Insert Case |
|
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth finish.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Stainless Steel, Titanium, and Heat-Resistant Super Alloy | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| DCGT-21.50.2 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 3/32" | 0.11" | 0.3" | 0.004" | Positive | Medium, Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N17 | 000000 | 10 | 8881N37 | 0000000 | ||
| DCGT-21.50.5 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 3/32" | 0.11" | 0.3" | 0.008" | Positive | Medium, Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N18 | 00000 | 10 | 8881N38 | 000000 | ||
| DCGT-21.51 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 3/32" | 0.11" | 0.29" | 1/64" | Positive | Medium, Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N19 | 00000 | 10 | 8881N39 | 000000 | ||
| DCGT-32.50.2 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 3/8" | 5/32" | 0.173" | 0.45" | 0.004" | Positive | Medium, Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N21 | 00000 | 10 | 8881N41 | 000000 | ||
| DCGT-32.50.5 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 3/8" | 5/32" | 0.173" | 0.45" | 0.008" | Positive | Medium, Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N22 | 00000 | 10 | 8881N42 | 000000 | ||
| DCGT-32.51 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 3/8" | 5/32" | 0.173" | 0.44" | 1/64" | Positive | Medium, Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N23 | 00000 | 10 | 8881N43 | 000000 | ||
VCGT (Diamond with 35° Nose Angle)—For SVJC, SVPC, SVUC, and SVVC Holders
 | |  |
Individual Carbide Insert Case |
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Stainless Steel, Titanium, and Heat-Resistant Super Alloy | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| VCGT-220.2 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 1/8" | 0.11" | 0.43" | 0.004" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N24 | 000000 | 10 | 8881N44 | 0000000 | ||
| VCGT-220.5 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 1/8" | 0.11" | 0.42" | 0.008" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N25 | 00000 | 10 | 8881N45 | 000000 | ||
| VCGT-221 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 1/8" | 0.11" | 0.4" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N26 | 00000 | 10 | 8881N46 | 000000 | ||
VPGT (Diamond with 35° Nose Angle)—For SVJP, SVLP, and SVPP Holders
 | |  |
Individual Carbide Insert Case |
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Stainless Steel, Titanium, and Heat-Resistant Super Alloy | ||||||||||||||||||||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| VPGT-220.2 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 1/8" | 0.11" | 0.43" | 0.004" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N27 | 000000 | 10 | 8881N47 | 0000000 | ||
| VPGT-220.5 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 1/8" | 0.11" | 0.42" | 0.008" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N28 | 00000 | 10 | 8881N48 | 000000 | ||
| VPGT-221 | Aluminum Titanium Chromium Nitride (AlTiCrN) Coated | 1/4" | 1/8" | 0.11" | 0.4" | 1/64" | Positive | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Kyocera | Clear Plastic Case | 1 | 8881N29 | 00000 | 10 | 8881N49 | 000000 | ||
Lathe Tool Inserts for Heat-Resistant Super Alloys
CNGG (Diamond with 80° Nose Angle)—For DCLN and MCLN Holders
 | |
Individual Carbide Insert Case |
|
For Continuous Cutting Conditions—Choose inserts for continuous cutting conditions when machining pieces that allow for constant contact between the insert and the workpiece, such as round rods.
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are the most commonly used, often to machine imperfectly round workpieces, such as shafts with a keyway.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hexagonal bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Nickel, Titanium, and Heat-Resistant Super Alloy | ||||||||||||||||||||
For Continuous Cutting Conditions | ||||||||||||||||||||
| CNGG-431 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.33" | 1/64" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A133 | 000000 | 10 | 3244A11 | 0000000 | ||
| CNGG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.33" | 1/32" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A137 | 00000 | 10 | 3244A13 | 000000 | ||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| CNGG-431 | Uncoated | 1/2" | 3/16" | 0.203" | 0.33" | 1/64" | Negative | Finishing | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A135 | 00000 | 10 | 3244A111 | 000000 | ||
| CNGG-432 | Uncoated | 1/2" | 3/16" | 0.203" | 0.33" | 1/32" | Negative | Finishing | — | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A139 | 00000 | 10 | 3244A14 | 000000 | ||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| CNGG-431 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.33" | 1/64" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A132 | 00000 | 10 | 3244A1 | 000000 | ||
| CNGG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.33" | 1/32" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A136 | 00000 | 10 | 3244A12 | 000000 | ||
CNMG (Diamond with 80° Nose Angle)—For DCLN and MCLN Holders
 | |
Individual Carbide Insert Case |
|
For Continuous Cutting Conditions—Choose inserts for continuous cutting conditions when machining pieces that allow for constant contact between the insert and the workpiece, such as round rods.
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are the most commonly used, often to machine imperfectly round workpieces, such as shafts with a keyway.
For Interrupted Cutting Conditions—Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hexagonal bars.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Roughing Cutting Operation—Roughing inserts are used for removing material quickly when surface finish isn’t a concern.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Individual | Package | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Coating Process | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Nickel, Titanium, and Heat-Resistant Super Alloy | ||||||||||||||||||||
For Continuous Cutting Conditions | ||||||||||||||||||||
| CNMG-432 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.34" | 1/32" | Negative | Roughing | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A603 | 000000 | 10 | 3244A53 | 0000000 | ||
| CNMG-432 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.34" | 1/32" | Negative | Medium | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A602 | 00000 | 10 | 3244A526 | 000000 | ||
| CNMG-432 | Titanium Nitride (TiN) Coated | 1/2" | 3/16" | 0.203" | 0.34" | 1/32" | Negative | Finishing | CVD (Chemical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A601 | 00000 | 10 | 3244A52 | 000000 | ||
For Semi-Interrupted Cutting Conditions | ||||||||||||||||||||
| CNMG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | — | 0.34" | 1/32" | Negative | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A669 | 00000 | 10 | 3244A582 | 000000 | ||
| CNMG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.34" | 1/32" | Negative | Roughing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A605 | 00000 | 10 | 3244A551 | 000000 | ||
| CNMG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.34" | 1/32" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A604 | 00000 | 10 | 3244A55 | 000000 | ||
For Interrupted Cutting Conditions | ||||||||||||||||||||
| CNMG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.34" | 1/32" | Negative | Medium | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A607 | 00000 | 10 | 3244A56 | 000000 | ||
| CNMG-432 | Titanium Aluminum Nitride (TiAlN) Coated | 1/2" | 3/16" | 0.203" | 0.34" | 1/32" | Negative | Finishing | PVD (Physical Vapor Deposition) | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A606 | 00000 | 10 | 3244A554 | 000000 | ||
SNMG (Square with 90° Nose Angle)—For DSDN and MSDN Holders
| |
Individual Carbide Insert Case |
|
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are the most commonly used, often to machine imperfectly round workpieces, such as shafts with a keyway.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.
Individual | Package | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Nickel, Titanium, and Heat-Resistant Super Alloy | |||||||||||||||||||
For Semi-Interrupted Cutting Conditions | |||||||||||||||||||
| SNMG-433 | Uncoated | 1/2" | 3/16" | 0.203" | 0.34" | 3/64" | Negative | Medium | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A765 | 000000 | 10 | 3244A82 | 0000000 | ||
SPG (Square with 90° Nose Angle)—For CSBP Holders
| |
Individual Carbide Insert Case |
|
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are the most commonly used, often to machine imperfectly round workpieces, such as shafts with a keyway.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Individual | Package | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Nickel, Titanium, and Heat-Resistant Super Alloy | |||||||||||||||||
For Semi-Interrupted Cutting Conditions | |||||||||||||||||
| SPG-422 | Uncoated | 1/2" | 1/8" | 0.47" | 1/32" | Positive | Finishing | Sandvik Coromant | Clear Plastic Case | 1 | 3244A191 | 000000 | 10 | 3244A279 | 0000000 | ||
VNMG (Diamond with 35° Nose Angle)—For MVJN and MVVN Holders
| |
Individual Carbide Insert Case |
|
For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are the most commonly used, often to machine imperfectly round workpieces, such as shafts with a keyway.
Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.
Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.
Negative Rake Angle—Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.
For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.
Individual | Package | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | Finish | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Cutting Operation | Features | Mfr. | Includes | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
For Use On Nickel, Titanium, and Heat-Resistant Super Alloy | |||||||||||||||||||
For Semi-Interrupted Cutting Conditions | |||||||||||||||||||
| VNMG-332 | Uncoated | 3/8" | 3/16" | 0.15" | 0.09" | 1/32" | Negative | Finishing | Chip Breakers | Sandvik Coromant | Clear Plastic Case | 1 | 3244A293 | 000000 | 10 | 3244A398 | 0000000 | ||
Inserts for Carbide-Insert Countersinks
Triangular Insert
 |  |  |
Individual Carbide Insert Case |
Each | Package | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Use On | Features | Mfr. | Each | Pkg. Qty. | Pkg. | ||||
Uncoated Carbide | ||||||||||||||||
| TPGH-21.51 | 1/4" | 3/32" | 0.12" | 0.38" | 1/64" | Positive | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel | Chip Breakers | Republic Drill | 29245A222 | 000000 | 10 | 29245A221 | 000000 | ||
| TPGH-321 | 3/8" | 1/8" | 0.177" | 0.63" | 1/64" | Positive | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel | Chip Breakers | Republic Drill | 29245A67 | 00000 | 10 | 29245A188 | 00000 | ||
Titanium Nitride (TiN)-Coated Carbide | ||||||||||||||||
| TPGH-21.51 | 1/4" | 3/32" | 0.12" | 0.38" | 1/64" | Positive | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel | Chip Breakers | Republic Drill | 29245A224 | 00000 | 10 | 29245A223 | 000000 | ||
| TPGH-321 | 3/8" | 1/8" | 0.177" | 0.63" | 1/64" | Positive | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel | Chip Breakers | Republic Drill | 29245A71 | 00000 | 10 | 29245A306 | 000000 | ||
Square Insert
|  |  |
Individual Carbide Insert Case |
Each | Package | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insert Code | IC Dia. | Thk. | Hole Dia. | Cutting Edge Lg. | Tip Radius | Rake Angle Type | For Use On | Features | Mfr. | Each | Pkg. Qty. | Pkg. | ||||
Uncoated Carbide | ||||||||||||||||
| SPGH-433 | 1/2" | 3/16" | 0.177" | 0.5" | 3/64" | Positive | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel | Chip Breakers | Republic Drill | 29245A68 | 000000 | 10 | 29245A291 | 0000000 | ||
Titanium Nitride (TiN)-Coated Carbide | ||||||||||||||||
| SPGH-433 | 1/2" | 3/16" | 0.177" | 0.5" | 3/64" | Positive | Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel | Chip Breakers | Republic Drill | 29245A72 | 00000 | 10 | 29245A918 | 000000 | ||
