Economy Carbide Inserts
Install these carbide inserts into a matching holder. When a cutting edge becomes dull, rotate the insert in the holder to use a sharp edge. Larger nose angles and larger tip radii provide a stronger cutting edge but result in increased vibration and a rougher finish.
Positive-rake inserts have an edge that is less than 90° to sit flat in the holder for improved cutting clearance and a better finish than negative-rake inserts. They have cutting edges on one side.
Coated inserts last longer and can be run at faster speeds than uncoated inserts.
Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment. Inserts sold in packs come factory sealed from the manufacturer for maximum traceability.
| Insert Code | For Tool Bit Code | Finish | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | Rake Type | For Cutting Operation | Each | |
For Use On Aluminum, Brass, Bronze | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
VCMT-32.52 | VR-8, VR-10, VR-12, VR-16, VL-8, VL-10, VL-12, VL-16, VE-8, VE-10, VE-12, VE-16 | Uncoated | 3/8" | 5/32" | 0.65" | 1/32" | Positive | Medium | 00000000 | 000000 |
For Use On Steel | ||||||||||
| VCMT-32.52 | VR-8, VR-10, VR-12, VR-16, VL-8, VL-10, VL-12, VL-16, VE-8, VE-10, VE-12, VE-16 | Uncoated | 3/8" | 5/32" | 0.65" | 1/32" | Positive | Medium | 00000000 | 00000 |
| VCMT-32.52 | VR-8, VR-10, VR-12, VR-16, VL-8, VL-10, VL-12, VL-16, VE-8, VE-10, VE-12, VE-16 | Titanium Nitride (TiN) Coated | 3/8" | 5/32" | 0.65" | 1/32" | Positive | Medium | 00000000 | 00000 |
| Insert Code | For Tool Bit Code | Finish | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | Rake Type | For Cutting Operation | Pkg. Qty. | Pkg. | |
For Use On Aluminum, Brass, Bronze | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| VCMT-32.52 | VR-8, VR-10, VR-12, VR-16, VL-8, VL-10, VL-12, VL-16, VE-8, VE-10, VE-12, VE-16 | Uncoated | 3/8" | 5/32" | 0.65" | 1/32" | Positive | Medium | 10 | 00000000 | 0000000 |
For Use On Steel | |||||||||||
| VCMT-32.52 | VR-8, VR-10, VR-12, VR-16, VL-8, VL-10, VL-12, VL-16, VE-8, VE-10, VE-12, VE-16 | Uncoated | 3/8" | 5/32" | 0.65" | 1/32" | Positive | Medium | 10 | 00000000 | 000000 |
| VCMT-32.52 | VR-8, VR-10, VR-12, VR-16, VL-8, VL-10, VL-12, VL-16, VE-8, VE-10, VE-12, VE-16 | Titanium Nitride (TiN) Coated | 3/8" | 5/32" | 0.65" | 1/32" | Positive | Medium | 10 | 00000000 | 000000 |
Turning Carbide Insert Holders
Secure carbide inserts inside these holders for stable turning. They’re also known as indexable insert holders. Select a holder that’s compatible with your insert by matching the insert style and inscribed circle diameter (IC). Right-hand holders move from right to left toward the lathe chuck, left-hand holders move from left to right away from the lathe chuck, and neutral holders can cut in either direction.
S-code holders secure inserts with a screw for easy indexing. They’re the most commonly used holders with positive-rake inserts.
Holders with an offset shank are good for reaching into tight corners and when working close to the chuck.
Holders | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Insert | Shank | Replacement Torx Screws | Replacement Torx Keys | |||||||
| Inscribed Circle Dia. (IC) | Thick. | Wd. | Ht. | O'all Lg. | Each | Each | Each | |||
For Along-the-Length Turning, Chamfering, External Profiling | ||||||||||
Right Hand | ||||||||||
| 1/4" | 1/8" | 5/8" | 5/8" | 4" | 00000000 | 0000000 | 00000000 | 00000 | 0000000 | 00000 |
| 3/8" | 3/16" | 3/4" | 3/4" | 4 1/2" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/8" | 3/16" | 1" | 1" | 6" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
Left Hand | ||||||||||
| 3/8" | 3/16" | 3/4" | 3/4" | 4 1/2" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/8" | 3/16" | 1" | 1" | 6" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |