LCN 1261 Door Closers | McMaster-Carr

Clear All

	Manufacturer Manufacturer

LCN

	Manufacturer Series Manufacturer Series	Show

1261

	Manufacturer Series Manufacturer Series	Hide

1460/1461
1261
1450
4011
4021
4040XP
4050
4111
9130
9140

	Opening Direction Opening Direction

Opens Out

Opens In

	Mounting Location Mounting Location

Door

Frame

	Mounting Hole Center-to-Center Length Mounting Hole Center- to-Center Length

9 1/16"

	Opening/Closing Action Opening/Closing Action

Free Moving

Hold Open

	Finish Finish

	Brown
	Gray

	Mounting Hole Center-to-Center Height Mounting Hole Center- to-Center Height

3/4"

	For Maximum Exterior Door Width For Maximum Exterior Door Width

42"

	For Door Swing Direction For Door Swing Direction

Reversible

	Range of Motion Range of Motion

180°

	Operation Type Operation Type

Manual

	Specifications Met Specifications Met

ANSI

	Mounting Hardware Included Mounting Hardware Included

Yes

	Opening/Closing Speed Opening/Closing Speed

Adjustable

	For Minimum Interior Door Width For Minimum Interior Door Width

24"

	For Maximum Interior Door Width For Maximum Interior Door Width

54"

	Material Material

Iron

	Appearance Appearance

Dull

	For Minimum Exterior Door Width For Minimum Exterior Door Width

24"

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Useful Life Useful Life

2,000,000 Cycles

Forward

How can we improve?

2 Products

About Door Closers

When replacing an existing closer, remove the cover and match the model number and/or mounting hole pattern to a closer in our offering. Or, use one of our closers and a universal mounting plate that matches most hole patterns.

If you are installing a new closer, choose one that works for your door width. Due to added resistance from wind, closers typically accommodate smaller exterior doors than interior doors.

Mounting Positions

There are three typical mounting positions for door closers; many of our closers are versatile and can be mounted in any of these positions. To determine opening direction, stand on the side of the door where the closer will be mounted. If the door opens towards you it opens in; opens away from you it opens out.

Door Mount, Opens In—Also known as regular arm mount, this position allows the door to open in toward the closer.

Door Mount, Opens Out—Also known as parallel arm mount, the arm lays parallel with the door in the closed position.

Frame Mount, Opens Out—Also known as top frame mount, this position is often used for exterior doors.

High-Traffic Door Closers

LCN 1261

For frequently used doors, these closers last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern. All meet ANSI A156.4 Grade 1 durability, strength, and performance standards for door controls. Closers that meet UL 10C for fire-rated doors meet positive pressure fire test standards.

To determine door swing direction, stand on the side of the door where it swings away from you. If it opens to the right, select a right closer; if it opens to the left, select a left closer. Reversible closers are for right or left door-swing directions.

Free-moving closers pull doors shut after you've opened them.

Hold-open closers hold doors open until you close them with a slight push or pull on the door.

For Door Wd.				Opening Direction
Interior	Exterior	For Door Swing Direction	Opening/Closing Action	Door Mount	Frame Mount	Range of Motion	Mounting Hardware Included	Specifications Met	Choose a Finish		Each
LCN 1261
24"-54"	24"-42"	Reversible	Free Moving	Opens In, Opens Out	Opens Out	180°	Yes	ANSI A156.4 Grade 1 UL 10C for Fire-Rated Doors UL Listed	Brown, Gray	0000000	0000000
24"-54"	24"-42"	Reversible	Hold Open	Opens In, Opens Out	Opens Out	180°	Yes	ANSI A156.4 Grade 1	Brown, Gray	0000000	000000