We will reply to your message within an hour.
Bubbling action at the source provides quick and reliable leak detection, saving time and energy costs.
The aerosol can dispenses a foam that bubbles over pressure leaks and forms a crater over vacuum leaks, providing quick and reliable leak detection, while saving time and energy costs.
These detectors are fluorescent green. Bubbling action at the source provides quick and reliable leak detection, saving time and energy costs.
Identify a variety of small leaks quickly and access hard-to-reach areas with the flexible probe.
These detectors convert ultrasonic waves to an audible sound so you can find leaks.
Detect halogenated refrigerants such as HFCs, CFCs, and HCFCs. Access hard-to-reach areas with the flexible probe.
Check for leaks in pipes, valves, storage tanks, and other gas system components.
Measure boiler and furnace combustion efficiency. Also known as combustion analyzers.
When a tiny amount of liquid makes contact with the pH patch, it changes color to indicate a leak.
Detect lower levels of radiation than our standard detector. Measurements are displayed on an easy-to-read LCD.
Easy-to-see colors enable you to visually inspect for leaks in water systems without ultraviolet light.
Detect alpha, beta, gamma, and X-ray radiation.
Easy-to-see colors enable you to visually inspect for leaks in hydraulic systems without ultraviolet lights.
The clear plastic center permits easy visual inspection.
Small enough to fit in your pocket, these flashlights are good for detecting leaks in piping systems.
These lights have two UV bulbs and two fluorescent bulbs that work independently of each other.
Use for inspection and bug and rodent detection.
These versatile lights can be secured in the stand or removed for hand-held use.
The combination of UV light and magnifying lens lets you see the smallest traces of fluorescence while inspecting.
Find radiation leaks in microwave ovens that occur from damage, misuse, and everyday wear and tear.
Keep an eye on leaks, overflow, and temperature changes near your equipment, even when you’re offsite.
When water contacts the sensor, it triggers a buzzer to alert personnel to a leak or overflow hazard. Frequently used to monitor sinks, pipe lines, tubs, and sump pumps.
Keep your hands free by wearing a flashlight on your head.
Manually pump air, water, or hydraulic fluid through your system so you can test for leaks.
Easier to use than manual pumps, these use electricity to quickly pump water through your system so you can test for leaks.
These pumps use compressed air to pump water or hydraulic fluid at high pressures through your system for leak testing.
Light the wick to burn.
Expose the pen's wick and light it to produce a continuous trail of smoke.
When this detector senses carbon monoxide, it sends a signal to your control panel and sounds an alarm.
An audible alarm and warning light alert you to the presence of propane, methane, hydrogen, and carbon monoxide. This detector has a relay for connection to auxiliary alarm systems.
An audible alarm and warning light alert you to the presence of propane.
An audible alarm and warning light alert you to the presence of methane.
Place these indicators anywhere you need to detect and warn about the presence of carbon monoxide. The circle in the center darkens when carbon monoxide is detected and returns to its normal color when exposed to fresh air.
When your work area has too much or too little oxygen, these detectors alert you with an audible alarm, warning light, and vibrating alarm.
Use the probe to test the air in a hazardous area before entering. Great for confined spaces.
When these detectors sense high levels of hydrogen sulfide, they alert you with an audible alarm, warning light, and vibrating alarm.
When these detectors sense high levels of carbon monoxide, they alert you with an audible alarm, warning light, and vibrating alarm.
Measure and display real-time indoor ventilation quality.
An audible alarm and warning light alert you to the presence of hydrogen.
These detectors trigger a “caution” alert when a small amount of hydrogen is detected and a second “danger” alert if levels continue to rise.
When this detector senses high levels of combustible and toxic gases, it alerts you with an audible alarm, warning light, and vibrating alarm.
Reduce background noise so you can isolate individual sounds.
Listen to machine performance to detect mechanical problems and leaks.
In addition to measuring vibration, you can listen to and record machine performance.
Cover large areas with these long lamps.
Set the lamp on a bench top and rotate the head 360° to direct light.
Designed for UV curing of small areas, these lamps also aid in leak detection, quality control inspection, and testing.
Use these cordless lamps for UV curing as well as leak detection, quality control inspection, and testing.
Color oil-based liquids to make them more visible.
Make water-based liquids more visible with the addition of color.