These detectors are fluorescent green. Bubbling action at the source provides quick and reliable leak detection, saving time and energy costs. These noncorrosive, nonflammable detectors find leaks in pipes, tubes, fittings, tanks, and cylinders. They adhere to vertical surfaces. All wash off with water.

Easy-to-see colors enable you to visually inspect for leaks without ultraviolet light.

One gallon of water occupies 0.1337 cubic ft. Calculate the number of gallons a tank holds by dividing the tank volume by 0.1337.

Locate leaks up to 10 times faster than traditional leak-detecting methods. These detectors use 124 microphones to determine the precise location and size of leaks in compressed air and specific gas systems. The screen displays a high-resolution acoustic image that’s overlaid on a digital live shot of your facility to help you visualize the leak. It also displays analytics related to the leak, such as the rate and the potential cost savings of patching your system. You can capture the on-screen view through photos and video to review later. With a built-in flashlight, they remain accurate even in low-light spaces. Light enough to carry with one hand, you can bring these detectors on the go. A 650 ft. range means you can use them from one end of your facility to another, or to detect in hard-to-reach systems.

Connect the detector to your computer using Wi-Fi or the included USB cable to quickly transfer collected data.

Identify a variety of small leaks quickly and access hard-to-reach areas with the flexible probe. An audible alert increases in intensity the closer you get to the leak. Intrinsically safe for Class I, Divisions I and 2, Groups A, B, C, and D hazardous locations.

Check for combustible gas leaks in equipment such as pipes, valves, and storage tanks. When these detectors sense combustible gas, they alert you with a warning light and a continuous beeping sound. Unlike our other gas leak detectors, these are compact and can fit in your pocket. However, they only detect combustible gas, not toxic gas.

With bright-colored dye and a fully equipped kit, you have everything you need to spot leaks in your HVAC system. These kits come with the correct amount of dye required for your system's size. Inject the dye into your system and scan it with the UV light—the dye is fluorescent, so it’s easy to spot most leaks right away. For small leaks, let the dye circulate for 24 hours and then inspect it again. Use the dye cleaner before you fix a leak. If the repair isn’t sufficient, you’ll be able to spot more dye.

Detect halogenated refrigerants such as HFC, CFC, and HCFC. Access hard-to-reach areas with the flexible probe. This unit can detect leaks as small as 0.1 oz. per year in air conditioning and refrigeration systems. An audible alert increases in intensity as you approach the leak.

This detector converts ultrasonic waves to an audible sound so you can find leaks. Unlike typical leak detectors, this unit doesn’t rely only on the presence of a gas to work, making it suitable for a wider range of applications. In addition to gas leaks, it identifies ultrasonic sound caused by failing solenoids, valves, and bearings.

Three times more sensitive than standard refrigerant detectors, these infrared detectors can identify leaks as small as 0.03 oz. per year. They have an easy-to-read LCD screen that displays the concentration of gas in parts per million (PPM). When a leak is detected, a digital display lights up and the device emits a sound. Check for leaks in hard-to-reach areas using the built-in flexible probe. Use them to detect a variety of halogenated refrigerants.