100 W Output LED Drivers

Filter by

Output Wattage

Output Voltage

Input Voltage

Output Current

Frequency

Maximum Input Wattage

LED Driver Type

Wattage

Input Electrical Connection

Wire Leads

Light Technology

LED

For Use Outdoors

Yes

Output Electrical Connection

Wire Leads

Electrical Connection Type

Hardwire

Electrical Connection

Width

Material

Height

Length

Electrical Protection Type

Rated Life

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

RoHS

Compliant with Exemptions

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Case Material

6 Products

LED Drivers

Bring your LED light back to life without the cost and hassle of replacing the entire fixture. These drivers replace your light’s failed driver and convert your building’s AC voltage into the low-voltage DC power your LEDs need. They also shield your lights from damaging voltage and current fluctuations.

To select the right driver, match its output wattage to the label on your existing driver. If there’s no exact match, round up to the nearest wattage.

Constant-Current Driver—Constant current drivers are the most common and are often used with commercial and industrial lighting. They’re best for consistent brightness. Those with multiple output currents include a switch, so you can select the output current closest to your needs. Keep them on hand to replace drivers with varying current requirements.

Constant-Voltage Driver—Constant voltage drivers are best for long runs of lights, such as strip or tape lights, to maintain stable voltage. Rated IP65, they’re protected from dust and low-pressure jets of water. They’re safe for use as replacements in outdoor fixtures exposed to rain and wet conditions.

LED Driver Type—Drivers with constant current or constant voltage perform one function at a time. They automatically detect the light’s requirements and supply the appropriate type of power.

	Output			Input
	Wattage, W	Current, A	Voltage, V DC	Wattage, W	Voltage, V AC	Lg.	Wd.	Ht.	Temp. Range, ° F		Each
Constant-Current Driver or Constant-Voltage Driver



		100	0.1-4.1, 4.1	24, 12-24	115	120 to 277	9 1/2"	1 3/4"	1 1/8"	-40 to 130	4305N143	000000

Programmable LED Drivers


Driver	Programmer for Advance Drivers

Programmer for FieldSET Drivers

Match the brightness of your other lights when replacing a failed LED driver. These drivers let you program the output current to the exact level you need. Because they cover a wide range of currents, you don’t need to have multiple different ones on hand for repairs. They convert your building’s AC voltage into the constant low-voltage DC power your LEDs need.

To select the right driver, match its output wattage to the label on your existing driver. If there’s no exact match, round up to the nearest wattage.

Taptronic Series—Taptronic drivers are programmed with a free downloadable app on your iPhone or Android device. Enter the settings from the old driver’s label. Then tap the new driver to your device to transfer the settings wirelessly.

Advance Series—Advance drivers are programmed with a free downloadable Android app or a Signify Advance programmer (sold separately) connected to your PC. Enter the settings from the old driver’s label. Then tap the new driver to your Android device or programmer to transfer the settings wirelessly.

FieldSET Series—FieldSET drivers are programmed with an eldoLED FieldSET programmer (sold separately). The programmer doesn’t require a PC, making it ideal for frequent replacements. It's rugged and can survive drops from up to 10 ft. The programmer automatically copies settings from old FieldSET and Optotronic drivers—just connect them using the programmer's cord. Then connect your new FieldSET driver to transfer the settings. If your old driver is from another brand, you’ll need to manually enter the settings from the label.

Fastener Mount—Fastener mount drivers are secured using the screws from your original driver.

IP66 Enclosure Rating—Drivers that meet IP66 are protected from dust and high-pressure washdowns. They’re safe for use as replacements in outdoor fixtures exposed to rain and wet conditions.

	LED Drivers															Programmers
	Output			Input
	Wattage, W	Current, A	Voltage, V DC	Wattage, W	Voltage, V AC	Light Intensity Setting	Dimming Range	Lg.	Wd.	Ht.	Mount Type	Temp. Range, ° F	Enclosure Rating		Each		Each
Constant-Current Driver







				Taptronic Series

				100	0.35-1.25	50-185	110	120 to 277	Dimmable	10% to 100%	9 1/2"	2 3/8"	1 1/2"	Fastener	-40 to 120	IP66	8097N18	000000	———	0




						Advance Series

						100	0.1-1.1	48-43	114	120 to 277	Dimmable	10% to 100%	9 1/2"	2 3/8"	1 1/2"	Fastener	-40 to 130	—	4305N164	00000	8112N121	0000000




								FieldSET Series

								100	0.6-1.25	30-100	114	120 to 277	Dimmable	10% to 100%	6 5/8"	2 3/8"	1 1/2"	Fastener	-40 to 130	IP66	8097N28	00000	8112N122	000000