No need for wiring—these lights plug-in with a two-prong plug. Also known as shop lights.

These lights fit into ceiling cutouts.

Also known as strip or channel lights, the ends of these fixtures are designed to be wired together to create long rows of lights.

Don’t waste energy lighting unoccupied spaces--these lights turn on when they detect movement. Set them to turn off after 30 or 180 seconds.

Also known as pendant lights, these fixtures hang from a cord.

Mount these fixtures where you need light but don't have an electrical connection. They automatically turn on when movement is detected and off when an area is unoccupied.

With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.

Install sockets for medium (standard household) screw-in base light bulbs.

A sealed lens keeps moisture out to protect these lights against washdowns.

Suspend or mount with fasteners to the ceiling.

Connect the hooks to a fixture to suspend lights from the ceiling.

Lenses disperse light to reduce glare, while protecting bulbs from damage.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover.

Suspend these lights overhead or mount them above your workspace.

Illuminate outdoor areas and objects such as parking lots, flag poles, and billboards.

Heads adjust to any angle so you can direct light where needed.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

These lights automatically turn on when movement is detected and off when an area is unoccupied.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors.

Hang these lights where you need them on the job site.

A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.

Aim light where it's needed most in areas that don't have an electrical outlet.

Bring light to areas that don't have electrical power service.

These IP67 rated lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. They're compact for easy transport to job sites with no electrical power.

With a rounded, weighted base, these floodlights wobble—but don't fall over—when bumped.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction.

Light up remote spaces without having to keep track of a new cordless tool battery. These floodlights run on a Milwaukee M18 battery (sold separately). These lights extend up to 7 ft. tall and have a pivoting head to direct light where you need it.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Rated for use in damp locations, these lights withstand humidity and moisture.

These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.

Rated NEMA 4X, these lights are protected from corrosion and washdowns.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed.

Detect leaks and contamination while keeping both your hands free. These headlamps use UV light to reveal dyes, particles, and chemicals with fluorescent qualities, making cracks and defects easy to spot.

Reveal leaks, cracks, and contaminants that you wouldn’t find with a typical flashlight.

About the size of a credit card, these magnifiers have a lens that slides out of the case to inspect items and equipment on the go. When you slide them open, a bright LED light automatically turns on, making it easier to see details. The lens corrects for distortion near the edge, giving you a crisp, clear view across the entire lens.

Switch between UV light and white light to catch defects you'd otherwise miss with these hand-held magnifiers.

Hands-free like a benchtop magnifier and portable like a handheld magnifier, these are small enough to take with you and you don’t have to hold them.

Bend the flexible neck to any position and it will stay in place. A bright LED light emits an even, focused beam that's ideal for examining fine details on objects.

Bend the lamp and magnifying lens to any position—they’re mounted on separate arms for a flexible, hands-free set up.

Sturdy but flexible, these illuminated magnifiers have a weighted base to keep them still without tethering them to your workbench.

Make fine details and defects on textured surfaces visible. With a weighted base, you can easily move these magnifiers around.

More securely mounted than weighted-base magnifiers while taking up less space on your work surface, these illuminated magnifiers clamp to the side of a workbench.

Rated NEMA 4X and 13 for protection from dirt, washdowns, corrosion, and oil/coolant spraying.

These lights are rated IP69K to withstand high-pressure washdowns, such as those in food and beverage applications.

Easier to spot than other strobe lights, these lights emit bursts of multiple flashes.

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights.

Easier to spot than other strobe lights, these lights emit bursts of five flashes per cycle.

Quickly position these portable flashing lights using the magnetic base to draw attention to hazards in areas such as docks and railroad crossings. They are battery operated, so they do not need to be wired or plugged in.

These lights cycle through three different flashing patterns.

Direct your signal with these lights; they flash in one direction.

These lights can switch between being continuous or flashing.

These lights can switch between continuous, flashing, or revolving.

Direct traffic with these colored lights.

Give a signal with the push of a button. These lights have a control box for activating each of the three light modules.

Choose from seven colors, including nontraditional colors such as magenta and turquoise, for a custom four-light stack light.

Use these lights in tight spaces in place of a tower. They emit three colors from a single lens.

Design a stack light with your choice of light pattern and color. Start with a base, then add up to five modules total—twist and lock them together.