We will reply to your message within an hour.
More
These flashlights are built to handle everyday use. They have a slip-resistant grip to ensure a secure hold.
Small enough to fit in your pocket.
The smooth stainless steel surface allows for easy cleaning.
Plug in these rechargeable flashlights and they’ll automatically light up when the power goes out.
Direct light where it’s needed with these pivoting-head flashlights. When plugged in, they’ll automatically light up if the power goes out.
Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface.
Attach these tiny flashlights to a grease gun nozzle or air hose to shine light directly onto your work.
Always have a flashlight on hand—these attach to a key ring.
The handle opens into a tripod, so you can shine light on your work while keeping your hands free.
Shine light into hard-to-reach spaces with these flexible-arm flashlights.
Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away.
Rated for use in environments where hazardous material is present.
Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They're rated for use in environments where hazardous material is present.
Small enough to keep in your shirt pocket, these penlights are rated for use in environments where hazardous material is present.
In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. They're rated for use in environments where hazardous material is present.
All of these flashlights stand up to wet environments.
Because these flashlights are buoyant, they're easy to recover when dropped in the water.
Free your hands for other work by mounting a flashlight to a nearby surface.
Extend light into hard-to-reach spaces by attaching a fiber-optic cable to your flashlight.
Convert incandescent, halogen, krypton, and xenon Maglite flashlights into LED flashlights to produce more light and consume less battery power.
Attach mini and full-size flashlights to a hard hat and keep your hands free to work.
Securely store your flashlight when not in use.
Similar to a holster without the bulk, belt loops hold your flashlight when not in use.
An insulated cover protects against shock from accidental contact with live electrical circuits.
Keep your hands free by wearing a flashlight on your head.
Rated IP07, these headlamps withstand temporary submersion in a maximum of one meter of water for up to 30 minutes.
Safe for use in environments where hazardous material is present.
Turn a mini flashlight into a headlamp with these straps.
Bring light to areas that don't have electrical power service.
A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.
Use sun energy to bring light to remote areas and storage spaces without electrical wiring. These lights come with a solar panel to recharge their battery.
Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service.
Hang these lights where you need them on the job site.
A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.
Keep excess cord out of the way—the reel locks the cord at any length and retracts it when not in use.
A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.
These lights are rated for environments where hazardous material is present.
With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight.
These IP67 rated lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. They're compact for easy transport to job sites with no electrical power.
The handle on this floodlight also acts as a stand—pivot it 360° to aim light where it's needed. This floodlight is small and easy to carry to job sites that don't have electrical power.
Compact and easy to carry, these IP65-rated lights stand up to dust and low-pressure jets of water. The head adjusts up and down as well as side to side to direct light where it's needed.
Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.
These floodlights have heads that swivel and rotate for perfect positioning in hard-to-light areas.
Provide 360° of lighting.
Because these lights have a reflector, they distribute light more evenly than other portable lights.
Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable.
The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.
Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.
Gooseneck arms can be repositioned faster and more easily than articulating arms.
Pivot the head to cast a narrow beam of light to exactly where it's needed.
These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.
Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.
These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.
These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.
Also known as pendant lights, these fixtures hang from a cord.
Also known as troffers, these lights fit most standard drop-ceiling grids.
These lights fit into ceiling cutouts.
Also known as strip or channel lights, the ends of these fixtures are designed to be wired together to create long rows of lights.
Don’t waste energy lighting unoccupied spaces--these lights turn on when they detect movement. Set them to turn off after 30 or 180 seconds.
Mount these fixtures where you need light but don't have an electrical connection. They automatically turn on when movement is detected and off when an area is unoccupied.
Also known as turret lights, these fixtures have downlight reflectors to direct light.
Fit traditional fluorescent ceiling strip lights with these LED lights, which use energy more efficiently, last longer, and produce less heat.
No need for wiring—these lights plug-in with a two-prong plug. Also known as shop lights.
A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.
Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.
Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.
With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.
These lights mount to the wall so they're often used in enclosed spaces such as stairwells, hallways, and storage rooms.
These LED lights have an air-tight seal to protect against contaminants.
Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights.
Suspend or mount with fasteners to the ceiling.
A sealed lens keeps moisture out to protect these lights against washdowns.
Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.
These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.
Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.
Illuminate inline flow sights to inspect the color, clarity, and flow of liquids in food and beverage, brewery, chemical, and pharmaceutical processing lines.
Suspend these lights overhead or mount them above your workspace.
These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.
These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.
Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.
With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.
Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover.
Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.
Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.
Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.
A motion sensor turns on these lights when an enclosure door is opened. Mount them inside cabinets, closets, and other enclosed spaces.
Illuminate your electronics cabinets and racks with long-lasting LED lights.
Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.
These lights automatically turn on when movement is detected and off when an area is unoccupied.
Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.
No need for wiring—these lights plug-in with a three-prong plug.
Also known as wall packs, these lights mount to exterior walls and ceilings.
Illuminate outdoor areas and objects such as parking lots, flag poles, and billboards.
Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.
Hardwire these lights to a power source.
Heads adjust to any angle so you can direct light where needed.
Rated for use in damp locations, these lights withstand humidity and moisture.
Mount add-on heads in remote areas to extend emergency lighting.
These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.
No need for wiring—these lights plug-in with a two-prong plug.
Rated NEMA 4X, these lights are protected from corrosion and washdowns.
These lights are UL rated for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.
Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed.
A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.
These lights swing out from the wall to illuminate loading docks and trailers.
Attach these lights in one of the quick-clamp ports for a clear view of what's inside tanks, filters, and other closed containers used in brewery, pharmaceutical, and food-processing lines.
Charge these lighters for repeated long-term use.
Use for inspection and bug and rodent detection.
Small enough to fit in your pocket, these flashlights are good for detecting leaks in piping systems.
Inspect dim or dark areas with these illuminated mirrors.
Get a clear, wide-angle view of remote areas without using a ladder.
Illuminate outdoor flags without connecting to an electric power source. These lights have a built-in solar panel that gathers energy from the sun throughout the day to power them at night.
Illuminate signs and keyboards with a thin panel that’s backlit by a circuit board of LED chips.
These pocket knives include an assortment of built-in tools.
Fit these tools into your wallet or pocket to handle unexpected jobs while on the go.
Jaws open automatically for ease of use.
Illuminate the interior of your high-vacuum chamber to clearly observe what’s inside.