These lights are UL listed for environments where fuels, solvents, acetylene, and other hazardous substances may be present.

Direct your signal with these lights; they flash in one direction.

Quickly position these portable flashing lights using the magnetic base to draw attention to hazards in areas such as docks and railroad crossings. They are battery operated, so they do not need to be wired or plugged in.

Small as hockey pucks, these lightweight strobe lights mount to surfaces and are unobtrusive when they’re turned off.

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights.

Easier to spot than other strobe lights, these lights emit bursts of five flashes per cycle.

These lights can switch between being continuous or flashing.

Carry these lights around with you and place them wherever needed. They can switch between being continuous or flashing.

These lights are rated IP69K to withstand high-pressure washdowns, such as those in food and beverage applications.

You can use these lights outdoors and they will still be visible. Rated IP67 for harsh environments.

When motion is detected from both directions at a two-way corner, these lights flash to alert personnel and prevent collisions.

Give a signal with the push of a button. These lights have a control box for activating each of the three light modules.

These lights have LED bulbs for years of maintenance-free operation and can be wired as either continuous or flashing.

Design a stack light with your choice of light pattern and color. Start with a base, then add up to five modules total—twist and lock them together.

Mount the M22 male thread on the bottom of the light through a hole and then secure using the included nut.

These lights emit three colors from a single lens and can be mounted in tight spaces where a tower will not fit.