Make a custom panel light with your choice of light and lens cap color.

Rated NEMA 4X and 13 for protection from dirt, washdowns, corrosion, and oil/coolant spraying.

You can use these lights outdoors and they will still be visible. Rated IP67 for harsh environments.

These lights can switch between continuous, flashing, or revolving.

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights.

Mount the M22 male thread on the bottom of the light through a hole and then secure using the included nut.

Always know the precise status of your collaborative robot without complex wiring or custom programming. These lights come with a URCap plug-in, so your robot can communicate a range of conditions to them—from the end of a cycle to faults.

The quick-connect four-pole M12 plug on these lights makes them easy to hook up and configure.

Give a signal with the push of a button. These lights have a control box for activating each of the three light modules.

Good for tight spaces where a tower of lights won't fit, these emit three colors from a single lens.

Use a computer to program colors, lighting patterns, and sounds to communicate a variety of status conditions, material levels, and cycle times—these stack lights have 21 colors and 11 sounds.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Safeguard your equipment against overheating, wear, and malfunction from a spike or dip in voltage.

Protect electrical equipment from overcurrent and undercurrent damage—these relays continuously monitor current flow.

Often used to regulate the speed of AC fans or keep a heater at a set temperature, these relays connect directly to sensors to calculate and adjust output power. This allows you to use an analog input without converting it to a digital signal to control output power.

Receive signals from safety monitoring relays or controllers to switch devices off and on because of a system failure.

A NEMA 4X enclosure protects these relays from washdowns, dirt, and corrosion.

Control and diagnose issues with safety-critical circuits.

These relays pair the transmission reliability of an interface relay with the fail-safe operation of a safety relay. They have interlocking contacts—also known as force-guided or mechanically linked contacts—so opposing contacts won't close at the same time.

With no moving parts, these solid-state relays are fast switching and require less maintenance, last longer, and are quieter than mechanical switches.