LED Tape | McMaster-Carr

Filter by

Color

System of Measurement

Length

Material

Power Source

Numeric Graduations

Mount Type

Voltage

Light Color

Width

REACH

Electrical Connection

Straight Blade

Wire Leads

Wireless

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

RoHS

Compliant

Not Compliant

DFARS Specialty Metals

Case Material

Overall Length

Environment

Color Temperature

Component

Orientation

Light Appearance

Enclosure Rating

Electrical Connection Type

Wattage

78 Products

Tape Measures for Low Light

No need to juggle a flashlight when measuring inside machines and other dimly lit spaces. An LED lights up the blade on these tape measures so you can read them in the dark. The battery lasts 2 ½ hours; recharge it with the included USB.

Milwaukee


	Bottom

Control how fast the blade retracts without pinching your fingers—a slot underneath gives you access to the blade while guarding your fingers from the hook.

					Blade		Case
	Lg., ft.	Graduations	Numeric Graduations	Tip Style	Wd.	Material	Material	Color		Each
Manual Blade Lock



		25	1/16"	1", 1 ft.	Magnetic Hook	1 1/16"	Coated Steel	Plastic	Red	5672N11	000000

Tape Lights

Bend these flexible lights around corners or squeeze them into spaces where bulky fixtures won’t fit. They’re brighter than plug-in tape lights, so you can use them for inspections and other detailed work. They’re also a great choice to extend the life of your fluorescent or incandescent fixtures with energy-efficient LEDs. They have a higher CRI (color rendering index) than most other lights, so they illuminate subtle color differences. Each LED is inspected to make sure there are no visible differences in temperature and brightness, so you can combine multiple strips within the same space. Install them on any smooth surface—just peel and stick.

You’ll need a driver to power these lights. Customize your setup: join multiple lights together, use connectors to bridge gaps between stairs or shelves, or add channels to diffuse light within your space (all sold separately).

Note: To shorten a light, cut it at the marked intervals only. Cutting outside these marks can damage the circuit and create dead zones.

Tape Lights

IP20 Enclosure Rating—Lights rated IP20 are for indoor use only.

IP67 Enclosure Rating—Lights rated IP67 are sealed to protect against dust and temporary submersion, so they can be used outdoors and in dirty, wet areas. For submersion over 30 minutes, choose IP68 lights.

IP68 Enclosure Rating—Lights rated IP68 are sealed to protect against dust and temporary submersion, so they can be used outdoors and in dirty, wet areas. For submersion over 30 minutes, choose IP68 lights.

White Light—White tape lights come in several different light appearances to suit your environment or match existing lighting.

Any Color Light—Any-color lights connect to an app on your phone, so you can set them to any color or to any temperature of white light. They’re also known as RGB+WW lights.

Dim-to-Warm Color Temperature—Dim-to-warm lights get warmer as they dim to mimic incandescent lights.

Selectable Color Temperature—Use the switch included with color temperature selectable tape lights to choose between 5 options.

Warm Light— Lights with a warm appearance have a soft, yellow tone that is similar to an incandescent bulb.

Neutral Light—Lights with a neutral appearance balance blue and yellow tones for a bright, natural look. They’re often used in offices.

Cool Light—Lights with a cool appearance have white and blue tones that reduce eyestrain during detail-oriented tasks, such as inspecting.

											6 ft. Long		16 ft. Long		32 ft. Long
	Light Appearance	Brightness per ft., lm	Wattage per ft., W	Voltage, V DC	Color Rendering Index	Cut Interval	Wd.	Material	Includes	Certification		Each		Each		Each
LED Bulbs Included—Indoor Only (IP20)







				White Light

				Warm (2,700 K)	480	7	24	90	1"	3/8"/10 mm	Plastic	—	UL Listed, C-UL Listed, CE Marked	8836N27	000000	8836N28	000000	8836N29	0000000


				Warm (3,000 K)	480	7	24	90	1"	3/8"/10 mm	Plastic	—	UL Listed, C-UL Listed, CE Marked	8836N31	00000	8836N32	00000	8836N33	000000
				Warm (3,500 K)	480	7	24	90	1"	3/8"/10 mm	Plastic	—	UL Listed, C-UL Listed, CE Marked	8836N34	00000	8836N35	00000	8836N36	000000
				Neutral (4,000 K)	480	7	24	90	1"	3/8"/10 mm	Plastic	—	UL Listed, C-UL Listed, CE Marked	8836N37	00000	8836N38	00000	8836N39	000000




						White Light—Dim-to-Warm

						Warm (1,800 K to 3,000 K)	325	5	24	95	2"	3/8"/10 mm	Plastic	—	UL Listed, C-UL Listed, CE Marked	8836N44	00000	8836N45	00000	———	0




								White Light—Selectable

								Warm, Neutral, Cool (2,400 K; 2,700 K; 3,000 K; 4,000 K; 5,000 K)	810	8	24	95	2"	3/8"/10 mm	Plastic	Color Temperature Switch	UL Listed, C-UL Listed, CE Marked	8836N41	00000	8836N42	00000	8836N43	000000




										Any Color Light—Bluetooth Connection

										Warm, Neutral, Cool, Daylight (2,100 K to 6,500 K)	335	7	24	90	2 1/2"	7/16"/12 mm	Plastic	Bluetooth Controller	UL Listed, C-UL Listed, CE Marked	8836N47	00000	8836N48	000000	8836N49	000000


										LED Bulbs Included—Dusty, Submersible, Washdown, Wet (IP67)







														White Light

														Warm (2,700 K)	480	7	24	90	1"	1/2"/13 mm	Plastic	—	UL Listed, C-UL Listed, CE Marked	8836N51	00000	8836N52	00000	8836N53	000000


														Warm (3,000 K)	480	7	24	90	1"	1/2"/13 mm	Plastic	—	UL Listed, C-UL Listed, CE Marked	8836N54	00000	8836N55	00000	8836N56	000000
														Warm (3,500 K)	480	7	24	90	1"	1/2"/13 mm	Plastic	—	UL Listed, C-UL Listed, CE Marked	8836N57	00000	8836N58	00000	8836N59	000000
														Neutral (4,000 K)	480	7	24	90	1"	1/2"/13 mm	Plastic	—	UL Listed, C-UL Listed, CE Marked	8836N61	00000	8836N62	00000	8836N63	000000




																White Light—Selectable

																Warm, Neutral, Cool (2,400 K; 2,700 K; 3,000 K; 4,000 K; 5,000 K)	810	8	24	95	2"	1/2"/13 mm	Plastic	Color Temperature Switch	UL Listed, C-UL Listed, CE Marked	8836N64	00000	8836N65	000000	8836N66	000000


																LED Bulbs Included—Dusty, Submersible, Washdown, Wet (IP68)







																Any Color Light—Bluetooth Connection

																Warm, Neutral, Cool, Daylight (2,100 K to 6,500 K)	335	7	24	90	2 1/2"	9/16"/15 mm	Plastic	Bluetooth Controller	UL Listed, C-UL Listed, CE Marked	8836N71	000000	8836N72	000000	8836N73	000000

Magnets

Use flexible magnets to temporarily mount tape lights to a metal surface.

Adhesive Back—Adhesive-back magnets are for use with channels.

	Wd.	Thk.	Choose a Length, ft.		Per Ft.
Cut-to-Size Flexible Magnets



	Adhesive Back	1/2"	1/16"	5, 10, 20, 50, 100	5769K61	00000


	Plain Back	3/8"	1/16"	5, 10, 20, 50, 100	5759K19	0000
	Plain Back	1/2"	1/16"	5, 10, 20, 50, 100	5769K21	0000

Drivers

Drivers provide a constant voltage to your tape lights, protecting the LEDs from power fluctuations. Built-in thermal protection helps extend the lifespan of these drivers, and they’re housed in a UL-listed enclosure suitable for wet locations. To install, feed the power source and tape light wire leads through the knockouts. Seal the entry points using a _1/2 trade size conduit fitting or cord grip. Inside the enclosure, connect the wire leads using the included lever connectors. Do not exceed the recommended tape length; to power longer lights, add another driver.

IP67 Enclosure Rating—Drivers rated IP67 are sealed to withstand dust and temporary submersion.

			Output				Input
	For Tape Lg., ft.	Electrical Connection Type	Voltage, V DC	Current, amp	Wattage, W	Electrical Connection	Current, amp	Max. Wattage, W	Electrical Connection	Light Intensity Setting	Lg.	Wd.	Ht.	Enclosure Rating	Certification	Includes		Each
100V AC to 277V AC Input Voltage



		7 to 10	Hardwire	24	2.5	60	Wire Leads	0.7	71	Wire Leads	Dimmable	9 3/16"	3 3/8"	1 15/16"	IP67	UL Listed, C-UL Listed, UL Recognized Component, C-UL Recognized Component, CE Marked, FCC Compliant	Two Clamp-On Wire Splicing Connectors	8836N25	000000


		11 to 16	Hardwire	24	4	96	Wire Leads	1	113	Wire Leads	Dimmable	9 3/16"	3 3/8"	1 15/16"	IP67	UL Listed, C-UL Listed, UL Recognized Component, C-UL Recognized Component, FCC Compliant	Two Clamp-On Wire Splicing Connectors	8836N24	00000


		120V AC to 277V AC Input Voltage



				0 to 6	Hardwire	24	1.66	40	Wire Leads	0.43	47	Wire Leads	Dimmable	8"	2 3/4"	1 5/8"	IP62	UL Listed, C-UL Listed, UL Recognized Component, C-UL Recognized Component, CE Marked, FCC Compliant	Two Clamp-On Wire Splicing Connectors	8836N26	00000

Connectors

Tape-to-Tape

Tape Light

Connection

Tape-to-Tape Extender

Tape Light Connection

Tape-to-Wire Tape

Light Connection

Connectors join tape lights to each other or to drivers without soldering. They’re not rated for use in wet areas.

Tape-to-Tape Tape Light Connection—Tape-to-tape connectors are used to join two lights together.

Tape-to-Tape Extender Tape Light Connection—Connectors with extenders are used to wrap lights around a sharp corner or to connect two light sections across a gap.

Tape-to-Wire Tape Light Connection—Tape-to-wire connectors have wire leads for attaching the cut end of a light to a driver.

	Lg.		Each
For Fixed or Dim-to-Warm White Lights



	Tape-to-Tape	1"	8836N74	00000


	Tape-to-Tape Extender	6"	8836N76	0000
	Tape-to-Tape Extender	24"	8836N77	0000
	Tape-to-Wire	6"	8836N75	0000


	For Selectable White Lights



			Tape-to-Tape	1"	8836N78	0000


			Tape-to-Tape Extender	6"	8836N81	0000
			Tape-to-Tape Extender	24"	8836N82	0000
			Tape-to-Wire	6"	8836N79	0000


			For Any Color Lights



					Tape-to-Tape	1"	8836N83	0000


					Tape-to-Tape Extender	6"	8836N85	0000
					Tape-to-Tape Extender	24"	8836N86	00000
					Tape-to-Wire	6"	8836N84	0000

Channels


Angled	High

Wide	Low

Channels have a frosted lens that reduces the glare from tape lights and gives them a finished look. All come with brackets and mounting fasteners for easy installation.

Angled—Angled channels mount into corners and direct light at a 45° angle. They’re often used to illuminate counters, shelves, and stairs.

High—High channels have the most space between the LEDs and the lens, so they reduce glare the most.

Wide—Wide channels diffuse light over a wider area than other channels to eliminate shadows.

Low—Low channels are short and narrow, so you can squeeze them into the tightest spots.

							1.6 ft. Long		3.3 ft. Long		6.6 ft. Long
Profile	Wd.	Ht., mm	For Max. Tape Wd., mm	Lens Clarity	Material	Mounting Hardware Included		Each		Each		Each







			Silver Light

			Angled	5/8"/16 mm	16	10	Frosted	Aluminum	Yes	8836N16	00000	8836N15	000000	8836N14	000000


			High	11/16"/17 mm	15	12	Frosted	Aluminum	Yes	8836N13	0000	8836N12	00000	8836N11	00000
			Wide	15/16"/23 mm	11	20	Frosted	Aluminum	Yes	8836N23	0000	8836N22	00000	8836N21	00000
			Low	11/16"/17 mm	8	10	Frosted	Aluminum	Yes	8836N19	0000	8836N18	00000	8836N17	00000

Magnets

Use flexible magnets to temporarily mount tape lights to a metal surface.

Adhesive Back—Adhesive-back magnets are for use with channels.

	Wd.	Thk.	Choose a Length, ft.		Per Ft.
Cut-to-Size Flexible Magnets



	Adhesive Back	1/2"	1/16"	5, 10, 20, 50, 100	5769K61	00000

Grow Lights

Style C

Also known as agricultural lights, these lights encourage growth in herbs, flowers, and other plants indoors. They have three color settings to optimize your plants’ development from seedling onward. Blue light in the early stages enhances photosynthesis and establishes strong roots. White light during the vegetative stages makes it easier to see the plants and monitor growth. Red light in the later stages supports flowering and fruiting. Easily switch between each color or combine colors when you have plants at different stages. ETL listed for use in damp locations, these lights withstand humidity and moisture. You can link multiple lights together in a circuit to simplify wiring.

Style C—Style C lights, also known as tape lights, have an adhesive on the back for easy mounting. They’re flexible enough to fit in tight spaces such as corners and channels. Snap the two 4' sections together or use the included 6" or 12" connectors to create two rows of light or jump between shelves. You can also cut them to your desired length.

		Overall
	Style	Lg.	Wd.	Ht.	Brightness, lm	Light Appearance	Light Color	Max. No. of Lights per Circuit	Wattage, W	Voltage, V AC	Mounting Hardware Included	Certification	Includes		Each
LED Bulbs Included







				Adhesive Back

				C	96"	5/8"	5/16"	900	Daylight (6,500 K)	Blue, Red, White	6	11	120	No	ETL Listed, C-ETL Listed	Two 4' Tape Lights, Controller, 6" Connector, 12" Connector	8807N13	000000

Plug-In Tape Lights

These thin, flexible lights wrap around equipment, hide under cabinets, and squeeze into tight spaces—all you need is an outlet. Just peel and stick to attach them to any smooth surface. They’re easier to install than hardwired tape lights, but they’re not as bright. All come with a controller to turn them on or off and adjust the brightness and light appearance. You can also cut them to size.

White Light—Tape lights with only white LEDs are brighter than lights with any-color LEDs. You can link multiple lights together wirelessly: press the power button on one light, and others within 50 ft. will also turn on or off. For a longer light, connect two strips together. Use the included connecting cables to wrap a light around a sharp corner or make small jumps between strips.

Any Color Light—Tape lights with any-color LEDs can display the full spectrum of colors and any temperature of white. Use them to illuminate signs, brighten displays, or mark zones in your facility. They’re more flexible than tape lights with only white LEDs, so you can bend them around corners without adding a connecting cable.

20 ft. Long—You can connect two 20 ft. long lights to create a longer light.

									Electrical Connection
	Lg., ft.	Wd.	Light Appearance	Brightness per ft., lm	Color Rendering Index	Light Intensity Setting	Wattage, W	Voltage, V AC	Type	No. of Blades	Mounting Hardware Included	Environment	Includes	Features	Cannot Be Sold To		Each
LED Bulbs Included







				White Light

				16	3/8"	Warm (2,700 K; 3,000 K) Neutral (3,500 K) Cool (4,000 K) Daylight (5,000 K)	200	80	Dimmable	40	120	Plug In	3	Yes	Wet	Controller Three 6" Connecting Cables	Wirelessly Linkable	—	9886N111	000000




						Any Color Light

						20	3/8"	Warm, Neutral, Cool, Daylight (2,700 K to 6,500 K)	50	80	Dimmable	24	100 to 240	Plug In	2	Yes	Wet	Controller Remote Control	—	Canada	9886N112	00000


						100	3/8"	Warm, Neutral, Cool, Daylight (2,700 K to 6,500 K)	16	80	Dimmable	24	100 to 240	Plug In	2	Yes	Wet	Controller Remote Control	—	Canada	9886N113	00000

Portable Rope Work Lights

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site. They’re for use indoors.

Any Color—Any-color lights let you customize their color, brightness, and patterns. Choose from thousands of colors or simply turn on their separate LEDs that shine a warm white color. They connect to a free downloadable app on your smartphone using Wi-Fi. Use the app to group multiple rope lights together so that they flash in sync. You can even change the color and brightness every six inches along the rope.

Warm Light—Lights with a warm light appearance cast light with yellow tones, similar to an incandescent bulb.

Neutral Light—Lights with a neutral light appearance are commonly used in workspaces.

Daylight Light—Lights with a daylight light appearance produce light that highlights white and blue tones, so they are good for inspecting.

Cannot Be Sold to Canada—Lights that cannot be sold to Canada are restricted due to product registration requirements.

		Overall
	Color	Lg., ft.	Dia.	Bulb Spacing	Brightness	Light Appearance	Light Pattern Setting	Data Connection	Bulb Rated Life, hr.	Cord Lg., ft.	Outlet Included	Enclosure Rating	Includes	Cannot Be Sold To		Each
LED



		Any Color	10	1/2"	1/4"	Not Rated	Warm (2,700 K)	Continuous, Flashing	Wi-Fi	Not Rated	6	No	—	End Cap, Mounting Clips	Canada	16995K211	000000


		White	30	1/2"	1"	165 lm	Neutral (3,500 K)	—	—	60,000	5	No	IP65	End Cap, Mounting Clips	—	16995K212	000000
		White	30	1/2"	1"	189 lm	Daylight (6,000 K)	—	—	60,000	5	No	IP65	End Cap, Mounting Clips	—	16995K97	000000

Mounting Tracks

Add mounting tracks to rope lights with a 30’ length to keep the rope light in a perfectly straight line. They come in 3’ lengths, and you can cut them if you need them shorter. Fasten tracks to a flat surface with screws or adhesive (not included).

	Material	Color		Each
For 30 ft. Length



	3	Plastic	Clear	16995K213	000000

Light Panel Kits

Illuminate signs and keyboards with a thin panel that's backlit by a circuit board of LED chips. Use the kit to light an existing display or print a custom design directly on the panel. Circuit boards have power connections on both ends; connect one end to a power source and cap the unused connection. To create two backlit panels, cut the circuit board in two and connect each half to a power source.

	Panel
Color	Lg.	Wd.	Material	Color	Rated Life, hr.	Voltage, V DC	Electrical Connection Type	No. of Wire Leads	Light Intensity Setting	Includes		Each
White	11"	6"	Acrylic Plastic	White	20,000	9	Hardwire	4	Not Dimmable	Four Backlight Panels, Two Circuit Boards with Adhesive Strip and Eight LEDs	1522N13	0000000