We will reply to your message within an hour.
More
Hang these lights where you need them on the job site.
Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use.
Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust.
A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.
A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.
Bring light to areas that don't have electrical power service.
Aim light where it's needed most in areas that don't have an electrical outlet.
Use sun energy to bring light to remote areas and storage spaces without electrical wiring. These lights come with a solar panel to recharge their battery.
Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service.
Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery to light up work where there’s no outlet.
These lights are rated for environments where hazardous material is present.
These IP67 rated lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. They're compact for easy transport to job sites with no electrical power.
The handle on this floodlight also acts as a stand—pivot it 360° to aim light where it's needed. This floodlight is small and easy to carry to job sites that don't have electrical power.
Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction.
Compact and easy to carry, these ETL Listed lights stand up to low-pressure jets of water. The head adjusts up and down as well as side to side to direct light where it's needed.
Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.
These floodlights have heads that swivel and rotate for perfect positioning in hard-to-light areas.
Light up remote spaces without having to keep track of a new cordless tool battery. These floodlights run on a Milwaukee M18 battery (sold separately). These lights extend up to 7 ft. tall and have a pivoting head to direct light where you need it.
As bright as stadium lights, these floodlights are the most powerful in our offering—they’ll brighten jobsites half the size of a football field. They run on a diesel generator you can use to power other lights and tools in the field.
Because these lights have a reflector, they distribute light more evenly than other portable lights.
Provide 360° of lighting.
Keep your hands free by wearing a flashlight on your head.
Safe for use in environments where hazardous material is present.
Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap.
Clip these headlamps right into a mount on your tactical or rescue helmet.
Rated IP07, these headlamps withstand temporary submersion in a maximum of one meter of water for up to 30 minutes.
In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. They're rated for use in environments where hazardous material is present.
Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They’re rated for use in environments where ignitable concentrations of flammable or combustible gases, vapors, and liquids are present.
Rated for use in environments where hazardous material is present.
Small enough to keep in your shirt pocket, these penlights are rated for use in environments where hazardous material is present.
Shine light into hard-to-reach spaces—these flashlights have a flexible arm to see around tight corners and in crevices. They’re rated for use in environments where flammable gases, vapors, and liquids are present.
Clip these little flashlights to a baseball cap or a surface to light up your work.
If the power goes out, you’ll find these flashlights right away.
Shine light into hard-to-reach spaces with these flexible-arm flashlights.
Always have a flashlight on hand—these attach to a key ring.
The handle opens into a tripod, so you can shine light on your work while keeping your hands free.
The smooth stainless steel surface allows for easy cleaning.
Small enough to fit in your pocket.
Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface.
Direct light where it’s needed with these pivoting-head flashlights. When plugged in, they’ll automatically light up if the power goes out.
Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away.
These flashlights are built to handle everyday use. They have a slip-resistant grip to ensure a secure hold.
Plug in these flashlights and they’ll automatically light up when the power goes out. There’s no need to regularly replace the batteries—they recharge on the base when it’s plugged into an outlet.
Rated IP07, you can drop these penlights in water and they’ll still work. Plus, they’re small enough to fit in your pocket.
All of these flashlights stand up to wet environments.
Because these flashlights are buoyant, they're easy to recover when dropped in the water.
An insulated cover protects against shock from accidental contact with live electrical circuits.
Illuminate small spaces and mark locations with these reusable lightsticks.
Light up your work from under your brim.
Wear a flashlight around your neck to keep your hands free.
Light up enclosures and other spaces without wiring.
Detect leaks and contamination while keeping both your hands free. These headlamps use UV light to reveal dyes, particles, and chemicals with fluorescent qualities, making cracks and defects easy to spot.
Make surface defects stand out—these flashlights have a UV light that illuminates fluorescent dyes, particles, and chemicals so you can identify cracks and pores on parts or find leaks in your system.
Ditch the flashlight and bulky headlamp—these bump caps have LEDs under their brim to light your way.
Light up your space when you're working in cold conditions.
Attach this light to the neck of your welding torch to illuminate the weld area.