Leveling Supports | McMaster-Carr

Filter by

Mount Type

Bracket

Press Fit

Weld On

System of Measurement

Thread Size

Leg Shape

Mount Movement

Bracket Type

Base Material

Base Shape

Overall Height

Capacity per Mount

Base Diameter

For Leg Inner Width

Thread Length

Base Width

Bracket Width

Stud Material

Material

Thread Type

For Leg Outer Width

Bracket Depth

Bracket Length

Height

DFARS Specialty Metals

REACH

RoHS

Compliant with Exemptions

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

136 Products

About Leveling Mounts

Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

Rigid Leveling Mounts with Bracket


Style 1	Style 2

Style 3	Style 4

Level furniture without feet, such as cabinets and workbenches, on uneven surfaces. Attach the bracket using the included screws.

Steel Base—These mounts are best for dry environments since moisture will cause them to rust.

Nylon Base—These mounts won't scratch or scuff floors when you're moving equipment.

								Bracket				Mounting Holes
	Style	Thread Size	Thread Lg.	Cap. per Mount, lb.	Stud Drive Style	Base Dia.	Overall Ht.	Wd.	Dp.	Ht.	Material	Fasteners Included	No. of	Dia.	Pkg. Qty.		Pkg.
Steel Base and Zinc-Plated Steel Stud



		1	M10 × 1.5 mm	2 1/2"	100	Hex	2"	2 3/4"	4 15/16"	1 15/16"	1 7/16"	Zinc-Plated Steel	Yes	4	3/16"	2	000000	000000


		Nylon Base and Zinc-Plated Steel Stud



				2	M10 × 1.5 mm	2 7/8"	100	Hex	1 1/4"	3 1/4"	2 1/8"	1 3/4"	2 1/8"	Zinc-Plated Steel	Yes	4	3/16"	4	000000	00000


				3	M8 × 1.25 mm	2 11/16"	100	Slotted	1 5/16"	3"	1 3/8"	1"	1 5/8"	Zinc-Plated Steel	Yes	4	3/16"	1	000000	0000
				4	M8 × 1.25 mm	2 11/16"	100	Slotted	1 5/16"	3"	4 13/16"	1 7/16"	1 5/16"	Zinc-Plated Steel	Yes	4	3/16"	1	000000	0000

Swivel Leveling Mounts with Bracket

With Corner Bracket

With Square Bracket

Corner Bracket

Square Bracket

With Hex Socket

Stud

Install these mounts on the bottom of equipment without feet using the heavy duty bracket. They have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. You can also use the bracket to make your equipment mobile by replacing the mount with a caster that has a threaded stem.

Aluminum Base—These mounts are lighter than stainless steel ones, reducing the overall weight of your machine. They withstand occasional exposure to moisture, but don't hold up in wet environments like stainless steel.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Corner Bracket—These mounts cut across the corner of rails that join at a right angle, such as the structural framing rails used to build racks.

Square Bracket—Fasten these mounts to the bottom of flat surfaces such as storage cabinets and lockers.

Hex Stud—Turn the stud from above with a hex key to adjust the height without having to reach under your machine with a wrench.

	Leveling Mounts																	Replacement Brackets
						Bracket				Mounting Holes				Without Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Stud Drive Style	Base Dia.	Lg.	Wd.	Ht.	Material	Fasteners Included	No. of	Dia.	Ctr.-to-Ctr. Lg.	Cap. per Mount, lb.	Overall Ht.		Each		Each
Aluminum Base and Zinc-Plated Steel Stud







				Corner Bracket

				1/2"-13	3"	25°	—	1 7/8"	4 3/8"	4 3/8"	1 1/16"	Stainless Steel	No	4	5/16"	1 1/2"	500	4 5/16"	0000000	000000	0000000	000000




						Square Bracket

						1/2"-13	3"	25°	—	1 7/8"	3"	3"	1 1/16"	Stainless Steel	No	4	5/16"	2 3/8"	500	4 5/16"	0000000	00000	0000000	00000


						5/8"-11	3 1/2"	25°	—	2 3/8"	3 7/8"	3 7/8"	1 1/4"	Stainless Steel	No	4	3/8"	3"	1,000	5 1/4"	0000000	00000	0000000	00000


						303 Stainless Steel Base and 304 Stainless Steel Stud







										Corner Bracket

										1/2"-13	3"	25°	—	1 7/8"	4 3/8"	4 3/8"	1 1/16"	Stainless Steel	No	4	5/16"	1 1/2"	1,000	4 5/16"	0000000	00000	0000000	00000


										5/8"-11	3 1/2"	25°	—	2 3/8"	6"	6"	1 1/4"	Stainless Steel	No	4	3/8"	2"	1,000	5 1/4"	0000000	000000	0000000	00000




												Square Bracket

												1/2"-13	3"	25°	—	1 7/8"	3"	3"	1 1/16"	Stainless Steel	No	4	5/16"	2 3/8"	500	4 5/16"	0000000	00000	0000000	00000


												5/8"-11	3 1/2"	25°	—	2 3/8"	3 7/8"	3 7/8"	1 1/4"	Stainless Steel	No	4	3/8"	3"	1,000	5 1/4"	0000000	00000	0000000	00000
												3/4"-10	4"	25°	—	2 7/8"	3 7/8"	3 7/8"	1 1/4"	Stainless Steel	No	4	3/8"	3"	1,500	6"	0000000	000000	000000	00000


												303 Stainless Steel Base and 416 Stainless Steel Stud







																Corner Bracket

																1/2"-13	3"	25°	Hex	1 7/8"	4 3/8"	4 3/8"	1 1/16"	Stainless Steel	No	4	5/16"	1 1/2"	500	4 5/16"	0000000	00000	0000000	00000


																3/4"-10	4"	25°	Hex	2 7/8"	6"	6"	1 1/4"	Stainless Steel	No	4	3/8"	2"	1,500	6"	0000000	000000	0000000	00000




																Square Bracket

		1/2"-13														3"	25°	Hex	1 7/8"	3"	3"	1 1/16"	Stainless Steel	No	4	5/16"	2 3/8"	500	4 5/16"	0000000	00000	0000000	00000


		5/8"-11	3 1/2"													25°	Hex	2 3/8"	3 7/8"	3 7/8"	1 1/4"	Stainless Steel	No	4	3/8"	3"	1,000	5 1/4"	0000000	000000	0000000	00000
		3/4"-10	4"													25°	Hex	2 7/8"	3 7/8"	3 7/8"	1 1/4"	Stainless Steel	No	4	3/8"	3"	1,500	6"	0000000	000000	000000	00000

High-Capacity Press-Fit Leveling Mount Inserts

Rated for high load capacity, use these inserts to connect threaded leveling mounts to machinery, instrument bases, and conveyor equipment with tubular legs. These inserts have pass-through holes that are partially threaded at the base. Tap mounts into place with a rubber hammer.

For Square Legs

Shown with

Brass

Insert

Installed

Plastic—The economical choice. These inserts can handle more weight than inserts with brass threads, but may wear out more quickly if frequently adjusted.

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg						Thread
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount, lb.	Overall Ht.	, mm	Size	Type	Dp.	Temp., ° F		Each
Plastic



		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	—	3/8"-16	UNC	1 1/4"	-20 to 170	0000000	00000


		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	—	1/2"-13	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	—	5/8"-11	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	—	3/4"-10	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	—	3/8"-16	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	—	1/2"-13	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	—	5/8"-11	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	—	3/4"-10	UNC	1 1/4"	-20 to 170	0000000	0000
		2"	2"	1 3/4"	1 3/4"	3,500	2"	—	3/8"-16	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 3/4"	1 3/4"	3,500	2"	—	1/2"-13	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 3/4"	1 3/4"	3,500	2"	—	5/8"-11	UNC	1"	-20 to 170	0000000	0000


		2"	2"	1 3/4"	1 3/4"	3,500	2"	—	3/4"-10	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	—	3/8"-16	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	—	1/2"-13	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	—	5/8"-11	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	—	3/4"-10	UNC	1"	-20 to 170	0000000	0000


		Plastic with Brass Insert



				1"	1"	7/8"	7/8"	1,100	1 3/16"	—	3/8"-16	UNC	7/8"	30 to 195	00000000	0000


				1"	1"	7/8"	7/8"	1,100	1 3/16"	—	1/2"-13	UNC	7/8"	30 to 195	00000000	0000
				1 3/16"	1 3/16"	1 1/16"	1 1/16"	1,200	1 5/16"	—	3/8"-16	UNC	7/8"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,500	1 3/4"	—	3/8"-12	Acme	1 1/4"	-20 to 180	00000000	0000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,500	1 3/4"	—	1/2"-10	Acme	1 1/4"	-20 to 180	00000000	0000
				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	1.5	M10	Metric	1"	-20 to 180	00000000	0000
				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	1.75	M12	Metric	1"	-20 to 180	00000000	0000


				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	2	M16	Metric	1"	-20 to 180	00000000	0000
				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	2.5	M20	Metric	1"	-20 to 180	00000000	0000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000
				2"	2"	1 3/4"	1 3/4"	1,000	1 15/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
				2"	2"	1 3/4"	1 3/4"	1,000	1 15/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
				2"	2"	1 3/4"	1 3/4"	1,000	1 15/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
				2"	2"	1 3/4"	1 3/4"	1,760	1 15/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000


				2"	2"	1 3/4"	1 3/4"	2,000	2"	—	3/8"-12	Acme	1"	-20 to 180	00000000	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	—	1/2"-10	Acme	1"	-20 to 180	00000000	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	1.5	M10	Metric	1"	-20 to 180	00000000	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	1.75	M12	Metric	1"	-20 to 180	00000000	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	2	M16	Metric	1"	-20 to 180	00000000	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	2.5	M20	Metric	1"	-20 to 180	00000000	0000
				2"	2"	1 7/8"	1 7/8"	1,000	1 15/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
				2"	2"	1 7/8"	1 7/8"	1,000	1 15/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
2"				2"	1 7/8"	1 7/8"	1,000	1 15/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
2"	2"			1 7/8"	1 7/8"	1,760	1 15/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000

For Rectangular Legs


Shown with Brass Insert Installed

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg						Thread
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount, lb.	Overall Ht.	Size	Type	Dp.	Temp., ° F		Each
Plastic with Brass Insert



		3"	2"	2 3/4"	1 3/4"	1,760	1 15/16"	5/8"-11	UNC	15/16"	30 to 195	00000000	000000


		3"	2"	2 3/4"	1 3/4"	1,760	1 15/16"	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000

For Round Legs


Shown with Brass Insert Installed

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg				Thread
	ID	OD	Cap. per Mount, lb.	Overall Ht.	, mm	Size	Type	Dp.	Temp., ° F		Each
Plastic with Brass Insert



		1 5/16"	1 1/2"	1,500	1 11/16"	1.5	M10	Metric	1"	-20 to 180	00000000	00000


		1 5/16"	1 1/2"	1,500	1 11/16"	1.75	M12	Metric	1"	-20 to 180	00000000	0000
		1 5/16"	1 1/2"	1,500	1 11/16"	2	M16	Metric	1"	-20 to 180	00000000	0000
		1 3/8"	1 1/2"	1,000	1 11/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
		1 3/8"	1 1/2"	1,000	1 11/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
		1 3/8"	1 1/2"	1,000	1 11/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
		1 3/8"	1 1/2"	1,000	1 11/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000
		1 9/16"	1 11/16"	1,000	1 11/16"	—	3/8"-16	UNC	7/8"	30 to 195	00000000	00000
		1 9/16"	1 11/16"	1,000	1 11/16"	—	1/2"-13	UNC	7/8"	30 to 195	00000000	00000
		1 9/16"	1 11/16"	1,000	1 11/16"	—	5/8"-11	UNC	7/8"	30 to 195	00000000	00000
		1 11/16"	1 15/16"	1,000	1 15/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000


		1 11/16"	1 15/16"	1,000	1 15/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
		1 11/16"	1 15/16"	1,000	1 15/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
		1 11/16"	1 15/16"	1,760	1 15/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000
		1 11/16"	2"	2,000	1 15/16"	—	3/8"-16	UNC	1"	30 to 195	000000000	0000
		1 11/16"	2"	2,000	1 15/16"	—	1/2"-13	UNC	1"	30 to 195	000000000	0000
		1 13/16"	2"	2,000	1 15/16"	1.5	M10	Metric	1"	-20 to 180	00000000	0000
		1 13/16"	2"	2,000	1 15/16"	1.75	M12	Metric	1"	-20 to 180	00000000	0000
		1 13/16"	2"	2,000	1 15/16"	2	M16	Metric	1"	-20 to 180	00000000	0000
		1 13/16"	2"	2,000	1 15/16"	2.5	M20	Metric	1"	-20 to 180	00000000	0000
		1 7/8"	2"	2,000	1 15/16"	—	3/8"-16	UNC	1"	30 to 195	000000000	0000


		1 7/8"	2"	2,000	1 15/16"	—	1/2"-13	UNC	1"	30 to 195	000000000	0000
		1 7/8"	2"	2,000	1 15/16"	—	5/8"-11	UNC	1"	30 to 195	000000000	0000
		1 15/16"	2"	1,000	1 15/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
		1 15/16"	2"	1,000	1 15/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
		1 15/16"	2"	1,000	1 15/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
		1 15/16"	2"	1,760	1 15/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000
		2 1/4"	2 3/8"	1,700	1 15/16"	—	5/8"-11	UNC	1 1/2"	30 to 195	00000000	00000

Press-Fit Leveling Mount Inserts

Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.

For Square Legs

Square inserts have flexible spring steel walls that grip the inside of the legs.

	For Leg						Thread
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount	Overall Ht.	Size	Type	Dp.	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		1"	1"	15/16"	15/16"	Not Rated	1 1/16"	1/4"-20	UNC	1/4"	4	0000000	00000


		1"	1"	15/16"	15/16"	Not Rated	1 1/16"	5/16"-18	UNC	1/4"	4	0000000	0000
		1"	1"	15/16"	15/16"	Not Rated	1 1/16"	3/8"-16	UNC	1/4"	4	0000000	00000
		1 1/4"	1 1/4"	1 3/16"	1 3/16"	Not Rated	1 1/16"	1/4"-20	UNC	1/4"	4	0000000	00000
		1 1/4"	1 1/4"	1 3/16"	1 3/16"	Not Rated	1 1/16"	5/16"-18	UNC	1/4"	4	0000000	00000
		1 1/4"	1 1/4"	1 3/16"	1 3/16"	Not Rated	1 1/16"	3/8"-16	UNC	1/4"	4	0000000	00000
		1 1/2"	1 1/2"	1 7/16"	1 7/16"	Not Rated	1 1/16"	3/8"-16	UNC	1/4"	4	0000000	00000
		1 1/2"	1 1/2"	1 7/16"	1 7/16"	Not Rated	2 1/8"	1/2"-13	UNC	1/2"	1	0000000	0000
		1 3/4"	1 3/4"	1 11/16"	1 11/16"	Not Rated	2 1/16"	1/2"-13	UNC	1/2"	1	0000000	00000
		2"	2"	1 15/16"	1 15/16"	Not Rated	2 1/16"	1/2"-13	UNC	1/2"	1	0000000	00000

For Round Legs

Image of Attribute. Front orientation. Contains Annotated.

Retaining clips hold the round inserts inside the legs.

	For Leg				Thread
	ID	OD	Cap. per Mount	Overall Ht.	Size	Type	Dp.	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		11/16"	3/4"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	0000000	00000


		11/16"	3/4"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	0000000	00000
		15/16"	1"	Not Rated	9/16"	3/8"-16	UNC	3/8"	4	0000000	00000
		15/16"	1"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	0000000	00000
		15/16"	1"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	0000000	00000
		1 3/16"	1 1/4"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	0000000	00000
		1 3/16"	1 1/4"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	0000000	00000
		1 3/16"	1 1/4"	Not Rated	5/8"	3/8"-16	UNC	3/8"	4	0000000	00000
		1 7/16"	1 1/2"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	0000000	00000
		1 7/16"	1 1/2"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	0000000	00000
		1 7/16"	1 1/2"	Not Rated	5/8"	3/8"-16	UNC	3/8"	4	0000000	00000


		1 15/16"	2"	Not Rated	3/8"	3/8"-16	UNC	3/8"	4	0000000	00000
		1 15/16"	2"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	0000000	00000
		2 7/16"	2 1/2"	Not Rated	5/8"	3/8"-16	UNC	3/8"	4	0000000	00000

Weld-On Leveling Mount Inserts

Weld these inserts to the end of tubular legs to attach threaded leveling mounts and casters. They create a more secure connection than press-fit inserts.

For Square Legs

	For Leg				Thread
	Outer Lg.	Outer Wd.	Cap. per Mount	Ht.	Size	Type		Each
Steel



		1"	1"	Not Rated	1/4"	3/8"-16	UNC	0000000	000000


		1"	1"	Not Rated	1/4"	1/2"-13	UNC	0000000	00000
		1"	1"	Not Rated	1/4"	5/8"-11	UNC	0000000	00000
		1"	1"	Not Rated	1/4"	3/4"-10	UNC	0000000	00000
		1 1/2"	1 1/2"	Not Rated	1/4"	3/8"-16	UNC	0000000	00000
		1 1/2"	1 1/2"	Not Rated	1/4"	1/2"-13	UNC	0000000	00000
		1 1/2"	1 1/2"	Not Rated	1/4"	5/8"-11	UNC	0000000	00000
		1 1/2"	1 1/2"	Not Rated	1/4"	3/4"-10	UNC	0000000	00000
		2"	2"	Not Rated	1/4"	3/8"-16	UNC	0000000	00000
		2"	2"	Not Rated	1/4"	1/2"-13	UNC	0000000	00000
		2"	2"	Not Rated	1/4"	5/8"-11	UNC	0000000	00000


		2"	2"	Not Rated	1/4"	3/4"-10	UNC	0000000	00000