M24 Levels | McMaster-Carr

Filter by

System of Measurement

Overall Height

Mount Movement

Mount Type

Base Material

Base Diameter

Capacity per Mount

10,000 lb. to 19,999 lb.

Thread Length

With Cushion

Base Shape

Stud Material

Hex Nut Material

Thread Type

Hex Nut Finish

Zinc Yellow-Chromate Plated

Hex Nut Width

Thread Pitch

Base Finish

Zinc Yellow-Chromate Plated

Swivel Range of Motion

7.5°

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Minimum Temperature

Cushion Color

Maximum Temperature

27 Products

About Leveling Mounts

Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

Mount Type

Threaded Stud

Install in either threaded holes or unthreaded through holes

22 products

Threaded Hole

Add your own stud to create a custom mount

5 products

Performance

Vibration Damping

Reduce vibration to protect components and extend your machine's life

5 products

Shock Absorbing

Isolate shock to prevent damage when equipment suddenly starts and stops

2 products

Swivel Leveling Mounts with Threaded Hole

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Dp., mm	Swivel Range of Motion	Base Dia., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm	Cushion Material		Each
Nickel-Plated Steel Base



		M24 × 3 mm	17.7	7.5°	102	19,840	48	6103K607	000000	14,990	51	Natural Rubber	6103K615	000000


		Zinc-Yellow-Chromate-Plated Steel Base



				M24 × 3 mm	17.5	7.5°	102	19,800	48	6120K37	00000	14,960	51	Natural Rubber	6120K45	00000


				303 Stainless Steel Base



						M24 × 3 mm	17.5	7.5°	102	19,800	48	6120K53	00000	—	—	—	———	0

Swivel Leveling Mounts with Threaded Stud

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg., mm	Swivel Range of Motion	Base Dia., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm	Cushion Material		Each
Nickel-Plated Steel Base and Stud



		M24 × 3 mm	89	7.5°	102	19,500	137	6111K657	000000	14,500	140	Natural Rubber	6111K668	000000
		M24 × 3 mm	108	7.5°	102	19,500	156	6111K658	00000	14,500	159	Natural Rubber	6111K669	00000


		Zinc-Yellow-Chromate-Plated Steel Base and Stud



				M24 × 3 mm	89	7.5°	102	19,840	137	6301K77	00000	14,990	140	Natural Rubber	6301K85	00000
				M24 × 3 mm	108	7.5°	102	19,840	156	6301K42	00000	14,990	159	Natural Rubber	6301K45	00000


				303 Stainless Steel Base and Stud



						M24 × 3 mm	89	7.5°	102	19,800	137	6301K93	00000	14,900	140	Natural Rubber	6301K117	000000
						M24 × 3 mm	108	7.5°	102	19,800	156	6301K48	000000	14,900	159	Natural Rubber	6301K118	000000


						316 Stainless Steel Base and Stud



								M24 × 3 mm	89	7.5°	102	19,800	137	6301K37	000000	—	—	—	———	0

Stay-Put Swivel Leveling Mounts with Threaded Stud

Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Two Mounting Holes


Without Cushion	With Cushion

Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

						Mounting Holes			Without Cushion			With Rubber Cushion
	Thread Size	Thread Lg., mm	Cap. per Mount, lb.	Swivel Range of Motion	Base Dia., mm	Fasteners Included	Dia., mm	Ctr.-to-Ctr. Lg., mm	Overall Ht., mm		Each	Overall Ht., mm	Cushion Material		Each
Glass-Filled Nylon Base and Zinc-Plated Steel Stud



		M24 × 3 mm	152	7,500	7.5°	102	No	11.9	68.8	185	6992K25	000000	186.6	Neoprene	6992K49	000000
		M24 × 3 mm	152	10,000	7.5°	127	No	12	98	210	6992K27	00000	211.6	Neoprene	6992K753	00000

Shock-Absorbing Swivel Leveling Mounts with Threaded Stud

Absorb sudden impacts from heavy machinery, such as punch presses, die cutters, and generators that jolt as they power on. These mounts have a solid rubber base, similar to a hockey puck, that isolates shock to protect floors and equipment from damage. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Round Neoprene Base with Zinc-Plated Steel Stud

Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Round Base.

Thread Size	Thread Lg.	Cap. per Mount, lb.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Overall Ht.		Each
M24 × 3 mm	4 5/16"	3,700	0.13"	7.5°	5"	6"	63965K86	0000000
M24 × 3 mm	4 5/16"	8,000	0.13"	7.5°	5"	6"	63965K87	000000

Vibration-Damping Swivel Leveling Mounts with Threaded Stud

With Cushion

A rubber cushion reduces vibration to protect components and extend your machine’s life. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.

					With Rubber Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Cap. per Mount, lb.	Deflection @ Cap.	Overall Ht.	Cushion Material		Each
304 Stainless Steel Base and Stud



		M24 × 3 mm	4 3/4"	7.5°	5 1/2"	3,000	0.17"	7"	Buna-N	6221K151	0000000
		M24 × 3 mm	5 15/16"	7.5°	3 7/8"	2,000	0.12"	7 5/8"	Buna-N	6221K148	000000
		M24 × 3 mm	5 15/16"	7.5°	5 1/2"	4,000	0.17"	8 1/8"	Buna-N	6221K152	000000