We will reply to your message within an hour.
More
These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.
Easily snap these latches into cutouts without tools or other hardware.
To prevent accidental opening, these latches have a safety catch.
These latches use downward compression to pull surfaces together for sealing gasketed doors.
A safety catch prevents accidental opening.
A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.
These latches are typically used to secure hoods and covers.
Mount these latches on a corner to draw perpendicular surfaces together.
Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.
An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.
The latch arm is coated with vinyl so it won't scratch surfaces.
No need for a strike plate, these latches hook into a lip or notch.
Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.
These latches have a safety catch to prevent accidental opening.
These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.
Each latch comes with a variety of strike plates for different mounting options.
Draw lightweight surfaces together with these latches.
Use these L-handle latches to draw lightweight surfaces together.
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.
Lift and turn the handle 180° to open and close these latches.
Use a 5/16" hex key to open and close these locks.
These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.
To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.
Open these locks with a slotted screwdriver.
Open these locks with a Torx driver or the included Torx keys.
Add a padlock to secure these latches, which reach around corners to pull two surfaces together.
For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.
Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.
Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.
Adjust the latching distance to compensate for gasketing and misalignment.
Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.
Lift and turn the handle 180° to open and close this lock.
Open several draw locks with the same key.
Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.
For use on gasketed doors, these latches use downward compression to pull surfaces together.
Bolt to the side of an object. Often used to clamp lids and covers on containers.
Weld these clamps to the side of an object or drill your own holes in the mounting plate and bolt into place.
Two sets of mounting holes allow mounting on the bottom or side.
Mount these clamps below a surface.
Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.
A highly durable construction with hardened steel pivot pins and bushings provides a long service life.
Fit the draw arm over a latch plate and pull the handle to clamp.
Push the lever to lock the handle and prevent accidental opening.
Mount the clamp on a lid and the latch plate on the side of a container.