We will reply to your message within an hour.
Replace the lids on your sanitary stainless steel drums. These lids are highly polished to prevent product buildup and bacteria growth, so they’re used to store food, beverage, and pharmaceutical products.
Clamp lids onto sanitary stainless steel drums using these leverlock closing rings, which create a tight seal and are easy to put on and take off.
Seal lids onto sanitary drums. These silicone seals are FDA compliant for direct contact with food.
Quickly open and close pails with these lids.The threaded lid screws into a ring that permanently fits over the pail edge.
Mix and store noncorrosive flammable liquids, such as paints and lacquers.
This pail has a brass handle that inhibits sparking and is nonmagnetic. It is often used with oil and solvents.
Pails are often used in food-processing applications.
Often used in food-processing applications, these plastic pails can be located using metal detectors.
Hold objects or materials for transport or pouring.
These 300 series stainless steel pails meet NSF/ANSI standards and are commonly used in food-processing applications.
Turn your pail into a comfortable swivel seat with these covers.
Keep contents secure with these pails and tight-fitting lids.
These single-use pails are often used to mix paint.
A galvanized finish protects these waste containers from rust.
These containers have two molded-in side handles and a durable bottom that stands up to dragging across the floor.
Often used in high-traffic environments, such as parking lots and cafeterias, these waste containers are dent resistant.
Wheel away waste in these large-capacity containers. Made of seamless heavy duty plastic, they resist cracks, dents, and leaks.
Open these waste containers with a wave of your hand. The motion-activated sensor lifts the lid and lowers it automatically.
Add these 7" tall waste containers to tables, shelves, and small spaces.
Step on the pedal to open these containers.
Open these plastic waste containers with your foot to discard trash without touching the lid.
Mount these containers to the wall to avoid using valuable floor space.
Shipped flat so you can keep plenty of extras on hand, these cardboard containers have a self-locking base for fast assembly.
Recycle your nonleaking magnetic and electronic ballasts. Use the paid shipping label to send the ballasts to a recycling facility.
These containers are marked with a recycling symbol to distinguish them from waste containers.
Recycling labels make it clear these containers are not for waste.
Made of heavy duty plastic, these containers resist cracks, dents, and leaks. They can be used with automated collection systems.
Recycle up to 45 lbs. of disposable gloves—these containers keep all of your used gloves isolated to prevent the spread of contaminants in your facility.
Safely dispose of used light bulbs by recycling them. Containers include a paid shipping label to send the bulbs to a recycling facility.
Fill these containers with your dead batteries, then attach the included paid shipping label to send them to a recycling facility.
Fill these containers with up to 25 lbs. of disposable masks to prevent cross-contamination in your facility, then seal and send them to a recycling facility with the pre-paid shipping label.
For temporary storage of oil- and solvent-soaked towels and brushes, these containers protect flammable contents from potential fire sources and spontaneous combustion.
Securely dispose of confidential materials. These containers are lockable and have a slot in the lid to slip in documents.
Dispose of waste and recycling in a single container, while still keeping them separate—these containers open hands-free with their foot pedal and close softly.
Safely dispose of static-charged waste. When placed on a grounded floor, these containers drain static charges from the waste into the floor.
Convert your drums into a covered waste container.
Convert drums and waste containers into parts cleaning workstations—these lids fit most 55-gal. drums and 44- and 55-gal. waste containers.
Place these boxes on top of each other to make the most of your storage or shipping space.
Move and store materials in your food processing facility with these tote boxes—they have metal and chemical additives that will set off metal detectors and show up on X-ray machines if a piece falls into your line.
Hold and transport material with these boxes. They nest and stack for easy storage.
These tote boxes resist most chemicals, solvents, and oils.
Interlock the hinged lids and fasten them together with a wire seal or cable tie to securely store and transport contents.
Choose the box and number of dividers you need. The dividers fit into molded slots in the boxes to create compartments.
When used with a lid, these tote boxes protect contents from electrostatic discharge.
These durable and water-resistant boxes have removable rails to hang file folders.
These boxes ship flat but can be assembled in seconds, so you can keep plenty of extras on hand.
The handholds allow stacking when locked upright and nesting when pushed down.
These tote boxes are nestable in one direction and stackable when turned in the opposite direction.
With a capacity of 150 lbs., these are our strongest vented tote boxes.
Keep contents secure by attaching a padlock to both ends.
Save storage space with these collapsible tote boxes. They collapse to one-third their overall size.
Snap the lid closed on all sides to create an airtight and watertight seal.
Use these containers in food-processing facilities.
Cover beakers or hold small quantities of powders and solutions. Also known as watch glasses.
Store, pour, and carry up to 1 gallon.
A lip on the back allows bin boxes to hang from rails or louvered panels.
Protect sensitive parts from electrostatic discharge.
A removable window allows 30% more capacity yet still lets you see what's in the box.
These bins dissipate static charges to protect sensitive contents from damage.
Attach these bin boxes to any steel surface, such as machinery and cabinets, to keep small tools and parts nearby.
The ribbed wall design allows the bins to stack or nest.
Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A raised front and back prevents spills.
A tab on the back of the bin box allows it to be tilted from the shelf without falling.
Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A high front and back prevents spills.
These bins are very strong, with a capacity of 250 lbs. They're also chemical, solvent, and oil resistant.
The sloped bottom of the picking bin allows parts to flow forward while the shallow-angle lip makes them easily accessible.
These bin boxes have a sloped top and a clear lid that slides back for easy access to contents.
Stack bin boxes up to four high without removing the casters.
These plastic bin boxes are more durable than cardboard bin boxes but are just as easy to assemble without tape, glue, or fasteners.
Unlike other bin boxes, wire bin boxes are easy to clean and don't collect dust.
A conductive coating protects sensitive contents from electrostatic discharge.
These bins ship flat so you can keep plenty of extras on hand. They easily assemble without tape, glue, or fasteners.
Six compartments in one bin box let you keep items organized.
Collapse and stack containers when not in use to save valuable storage space.
Easily move these large containers where they're needed, then collapse and stack them to save valuable storage space.
A steel spring keeps these bags open when you need them, then collapses for compact storage.
Stretch these caps over flared edges such as flanged tubing and valve handles.
Tug on the pull tabs to stretch these caps onto the tips of bottles, beakers, flasks, and cylinders, creating an airtight seal.
At 4 fl. oz. and smaller, these cups are used for samples, condiments, and small-batch mixing.
Use these disposable cups for beverages.
Conceal or protect loads in hoppers.
Insert the wand of your vacuum conveyor in the port to move material out of these bins.
Bins can be stacked on a surface, wall mounted, or attached to a rack.
For large jobs, pour paint into these four-gallon pails. They have a handle for portability and a textured edge to remove excess paint from your roller. Compatible with rollers up to 9" long.