About Cam Latches and Locks
More
Lift-and-Turn Tight-Hold L-Handle Cam Latches

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers. All have an adjustable latching distance to adapt to a wider range of distances than other latches with a fixed distance. They’re best for tasks when precise distances are unknown. Adjust the latching distance before installing them. Select the turn direction of the latch when you mount the cam.
For technical drawings and 3-D models, click on a part number.
Latching Distance | Handle | Offset Cam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Short | Long | For Through Hole Dia. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Mounting Fasteners Included | Max. Clamping Force, lbs. | For Use On | Each | |
Black Painted Zinc | ||||||||||||||
3/16" | 0"-1/8" | 1 1/8"-1 5/16" | 3/8" | 1 3/8" | 1/2" | 11/16" | 1 1/16" | 1 1/16" | 1/2" | Yes | 50 | Metal, Plastic, Wood | 0000000 | 000000 |
3/16" | 3/16"-3/8" | 7/8"-1 1/16" | 3/8" | 1 3/8" | 1/2" | 11/16" | 1 1/16" | 1 1/16" | 1/2" | Yes | 50 | Metal, Plastic, Wood | 0000000 | 00000 |
3/16" | 7/16"-5/8" | 5/8"-7/8" | 3/8" | 1 3/8" | 1/2" | 11/16" | 1 1/16" | 1 1/16" | 1/2" | Yes | 50 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 0"-3/16" | 1 3/4"-2 1/8" | 11/16" | 3 1/8" | 3/4" | 1 1/4" | 1 5/8" | 1 5/16" | 5/8" | Yes | 150 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1/8"-7/16" | 1 1/4"-1 5/8" | 11/16" | 2 3/16" | 3/4" | 1 1/4" | 1 9/16" | 1 11/16" | 5/8" | Yes | 125 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 3/16"-9/16" | 1 3/8"-1 3/4" | 11/16" | 3 1/8" | 3/4" | 1 1/4" | 1 5/8" | 1 5/16" | 5/8" | Yes | 150 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1/2"-7/8" | 7/8"-1 1/4" | 11/16" | 2 3/16" | 3/4" | 1 1/4" | 1 9/16" | 1 11/16" | 5/8" | Yes | 125 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 9/16"-15/16" | 15/16"-1 3/8" | 11/16" | 3 1/8" | 3/4" | 1 1/4" | 1 5/8" | 1 5/16" | 5/8" | Yes | 150 | Metal, Plastic, Wood | 0000000 | 00000 |
Chrome-Plated Zinc—Polished | ||||||||||||||
3/16" | 0"-1/8" | 1 1/8"-1 5/16" | 3/8" | 1 3/8" | 1/2" | 11/16" | 1 1/16" | 1 1/16" | 1/2" | Yes | 50 | Metal, Plastic, Wood | 0000000 | 00000 |
3/16" | 3/16"-3/8" | 7/8"-1 1/16" | 3/8" | 1 3/8" | 1/2" | 11/16" | 1 1/16" | 1 1/16" | 1/2" | Yes | 50 | Metal, Plastic, Wood | 0000000 | 00000 |
3/16" | 7/16"-5/8" | 5/8"-7/8" | 3/8" | 1 3/8" | 1/2" | 11/16" | 1 1/16" | 1 1/16" | 1/2" | Yes | 50 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 0"-3/16" | 1 3/4"-2 1/8" | 11/16" | 3 1/8" | 3/4" | 1 1/4" | 1 5/8" | 1 5/16" | 5/8" | Yes | 150 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1/8"-7/16" | 1 1/4"-1 5/8" | 11/16" | 2 3/16" | 3/4" | 1 1/4" | 1 9/16" | 1 11/16" | 5/8" | Yes | 125 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 3/16"-9/16" | 1 3/8"-1 3/4" | 11/16" | 3 1/8" | 3/4" | 1 1/4" | 1 5/8" | 1 5/16" | 5/8" | Yes | 150 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1/2"-7/8" | 7/8"-1 1/4" | 11/16" | 2 3/16" | 3/4" | 1 1/4" | 1 9/16" | 1 11/16" | 5/8" | Yes | 125 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 9/16"-15/16" | 15/16"-1 3/8" | 11/16" | 3 1/8" | 3/4" | 1 1/4" | 1 5/8" | 1 5/16" | 5/8" | Yes | 150 | Metal, Plastic, Wood | 0000000 | 00000 |
Handle | Offset Cam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Mounting Fasteners Included | Max. Clamping Force, lbs. | For Use On | Each | |
Black Painted Zinc | |||||||||||||
1/4" | 1 11/16"-2" | 11/16" | 2 3/16" | 3/4" | 1 1/4" | 1 9/16" | 1 11/16" | 5/8" | Yes | 125 | Metal, Plastic, Wood | 0000000 | 000000 |
Chrome-Plated Zinc—Polished | |||||||||||||
1/4" | 1 11/16"-2" | 11/16" | 2 3/16" | 3/4" | 1 1/4" | 1 9/16" | 1 11/16" | 5/8" | Yes | 125 | Metal, Plastic, Wood | 0000000 | 00000 |
Lift-and-Turn Tight-Hold Paddle-Handle Cam Latches

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use. Often used on cabinet doors and file drawers, these latches have a metal arm that swings to lock. All can be adjusted to a range of latching distances, which is useful if you don’t know the precise measurements. When mounting the cam, adjust the latching distance and choose your turn direction.
Zinc latches have a reversible offset cam that can be mounted in two different ways, which means these latches have two different latching distance ranges.
Nylon plastic latches withstand damp and humid environments.
For technical drawings and 3-D models, click on a part number.
For Through Hole | Handle | Offset Cam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance Range | Lg. | Wd. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Max. Clamping Force, lbs. | Mounting Fasteners Included | For Use On | Each | |
Black Painted Zinc | ||||||||||||||
1/8" | 3/16"-3/8" (Short) 1 3/8"-1 9/16" (Long) | 1 5/8" | 11/16" | 1 13/16" | 7/8" | 1/16" | 1 3/8" | 1 1/16" | 1/2" | 50 | Yes | Metal, Plastic, Wood | 0000000 | 000000 |
1/8" | 7/16"-5/8" (Short) 1 1/8"-1 5/16" (Long) | 1 5/8" | 11/16" | 1 13/16" | 7/8" | 1/16" | 1 3/8" | 1 1/16" | 1/2" | 50 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1/4"-5/8" (Short) 2 1/4"-2 9/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 5/8"-1" (Short) 1 13/16"-2 13/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1 1/16"-1 3/8" (Short) 1 7/16"-1 13/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
Chrome-Plated Zinc—Polished | ||||||||||||||
1/8" | 3/16"-3/8" (Short) 1 3/8"-1 9/16" (Long) | 1 5/8" | 11/16" | 1 13/16" | 7/8" | 1/16" | 1 3/8" | 1 1/16" | 1/2" | 50 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/8" | 7/16"-5/8" (Short) 1 1/8"-1 5/16" (Long) | 1 5/8" | 11/16" | 1 13/16" | 7/8" | 1/16" | 1 3/8" | 1 1/16" | 1/2" | 50 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1/4"-5/8" (Short) 2 1/4"-2 9/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 5/8"-1" (Short) 1 13/16"-2 13/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1 1/16"-1 3/8" (Short) 1 7/16"-1 13/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
Black Nylon Plastic | ||||||||||||||
1/8" | 15/16"-1 1/8" | 2 13/16" | 1 1/8" | 3 5/16" | 1" | 1/4" | 1 11/16" | 1 9/16" | 9/16" | 65 | Yes | Metal, Plastic, Wood | 00000000 | 00000 |
Swing-Handle Cam Latches

Raise the handle and it swings smoothly for easy latching and unlatching. These latches are often used in server cabinets and electrical panels. All come with multiple cams to accommodate different latching distances.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | Offset Cam | For Cutout | Mounting Plate | Mounting Holes | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | No. of | Dia., mm | For Use On | Each | |
Black Powder-Coated Zinc | ||||||||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||||||||||
1/8" | 5/8", 7/8", 1 1/4" | 5/8" | 6" | 15/16" | 3/4" | 7/8" | 1 3/4" | 11/16" | 1 3/4" | 11/16" | 2" | 1" | 7" | 1 1/2" | Yes | 3 | 4 | Metal | 0000000 | 000000 |
Quarter-Turn Counterclockwise to Open | ||||||||||||||||||||
1/8" | 5/8", 1 1/16", 1 1/2" | 5/8" | 5 1/8" | 1" | 13/16" | 15/16" | __ | __ | 1 3/4" | 3/4" | 5" | 1" | 6" | 1 9/16" | Yes | 1 | 4 | Glass, Metal, Plastic, Wood | 0000000 | 00000 |
Washdown Swing-Handle Cam Latches

Often installed on sealed server cabinets and electrical panels, these latches have a gasket that prevents water, dust, and dirt from getting through the latch. They help your cabinet maintain an IP65 and NEMA 4 rating. Lift their handle and it swings smoothly to latch and unlatch the door. As you swing the handle, it rotates the cam 90°, so they’re often called quarter-turn latches. When locked, these latches lie flat so they don’t snag anything passing by. They come with multiple cams to accommodate different latching distances.
For technical drawings and 3-D models, click on a part number.
Handle | Offset Cam | For Cutout | Mounting Plate | Mounting Holes | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | No. of | Dia., mm | For Use On | Environmental Rating | Each | |
Black Powder-Coated Zinc | |||||||||||||||||||
1/8" | 9/16", 1", 1 1/2" | 5/8" | 4 5/8" | 15/16" | 13/16" | 15/16" | 1 3/4" | 11/16" | 2" | 1" | 6" | 1 1/2" | Yes | 3 | 4 | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 |
1/8" | 9/16", 1", 1 1/2" | 5/8" | 6" | 15/16" | 13/16" | 15/16" | 1 3/4" | 11/16" | 2" | 1" | 7" | 1 1/2" | Yes | 3 | 4 | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
Lift-and-Turn Tight-Hold Recessed T-Handle Cam Latches




Fold the handle into the recess to stay out of the way when not in use. It lays flat so you won’t bump into these latches or catch clothes on them. The latches project further into enclosures than other latches without a recess. To open them, pull the handle. Also known as compression cam latches, they create a tighter hold than traditional cam latches, making them useful for doors that have a seal. Lift the handle and turn it a quarter- or half-turn to close, then push it down to create full compression and minimize rattling from vibration.
All of these latches include one or more cams with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them.
Aluminum latches are lighter in weight then stainless steel latches, but not as corrosion resistant.
Use stainless steel latches in areas that are constantly exposed to moisture since they resist corrosion better than aluminum latches .
For Style B latches, the installation hole can be made with a round hole instead of the irregularly shaped standard cam hole. This is especially helpful if the material of the door is difficult to cut or part of an existing structure.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | Offset Cam | For Cutout | Mount. Plate | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Dia. | Lg. | Wd. | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
Black Powder-Coated Aluminum | ||||||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||||||||
A | 1/2" | 1 3/32"-1 11/16" (Short) 3 15/32"-4 3/32" (Long) | 1/2" | 2 11/16" | 2 7/16" | 1 7/8" | 3/4" | 1 7/8" | 3/4" | 3 3/8" | 3 3/8" | __ | 3 15/16" | 3 15/16" | Yes | 7mm | 0000000 | 000000 |
304 Stainless Steel—Polished | ||||||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||||||||
A | 1/2" | 1 3/32"-1 11/16" (Short) 3 15/32"-4 3/32" (Long) | 1/2" | 2 11/16" | 2 7/16" | 1 7/8" | 3/4" | 1 7/8" | 3/4" | 3 3/8" | 3 3/8" | __ | 3 15/16" | 3 15/16" | Yes | 7mm | 0000000 | 000000 |
316 Stainless Steel—Polished | ||||||||||||||||||
Half-Turn Clockwise to Open or Half-Turn Counterclockwise to Open | ||||||||||||||||||
B | 3/4" | 13/16"-2 13/16" | 2" | 1 3/8" | 1 3/8" | __ | __ | 2 9/16" | 19/32" | __ | __ | 2 3/8" | __ | __ | Yes | 3/16" | 000000 | 00000 |
Lift-and-Turn Tight-Hold T-Handle Cam Latches

Lift the handle and turn it a quarter-turn to latch, then push it down for a tight hold that resists vibration. Also known as compression cam latches, these latches seal your enclosure better than standard cam latches. They have an adjustable latching distance, so they're great if you don't know the precise latching distance. Adjust the position of the cam before you install. These latches come with multiple cams to accommodate different latching distances.
Aluminum latches have good corrosion resistance and are lighter weight than stainless steel latches.
Stainless steel latches resist corrosion better than aluminum latches when exposed to constant moisture.
For technical drawings and 3-D models, click on a part number.
Latching Distance | Handle | Straight Cam | Offset Cam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Short | Long | For Through Hole Dia. | Lg. | Wd. | Projection | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | Max. Clamping Force, lbs. | For Use On | Each | |
Black Powder-Coated Aluminum | |||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | |||||||||||||||
1/8" | 0"-9/16" | 2 3/8"-2 15/16" | 7/8" | 2 15/16" | 2 9/16" | 1 3/16" | 1 7/8" | 3/4" | 1 7/8" | 3/4" | Yes | 225 | Metal, Plastic, Wood | 0000000 | 000000 |
304 Stainless Steel—Polished | |||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | |||||||||||||||
1/8" | 0"-9/16" | 2 3/8"-2 15/16" | 7/8" | 2 15/16" | 2 9/16" | 1 3/16" | 1 7/8" | 3/4" | 1 7/8" | 3/4" | Yes | 225 | Metal, Plastic, Wood | 0000000 | 000000 |
Lift-and-Turn Tight-Hold Paddle-Handle Keyed Alike Cam Locks

Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Choose them if you need several locks that open with the same key. Select the turn direction when mounting the cam. Each lock comes with a reversible offset cam to provide variable latching-distance ranges depending on the cam position.
For technical drawings and 3-D models, click on a part number.
Latching Distance | For Through Hole | Handle | Offset Cam | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Short | Long | Key Number | Lg. | Wd. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Mounting Fasteners Included | Max. Clamping Force, lbs. | For Use On | Each | |
Black Painted Zinc | ||||||||||||||||
1/4" | 1/4"-5/8" | 2 1/4"-2 9/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 000000 |
1/4" | 5/8"-1" | 1 13/16"-2 13/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1 1/16"-1 3/8" | 1 7/16"-1 13/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 00000 |
Chrome-Plated Zinc—Polished | ||||||||||||||||
1/4" | 1/4"-5/8" | 2 1/4"-2 9/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 5/8"-1" | 1 13/16"-2 13/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1 1/16"-1 3/8" | 1 7/16"-1 13/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 00000 |
Lift-and-Turn Tight-Hold Recessed T-Handle Keyed Alike Cam Locks
For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down into the recess to create compression and minimize rattling from vibration. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal. The handle lays flat and out of the way in the recess, so you won’t bump into these locks or catch clothes on them. However, the locks project further into enclosures than other locks without a recess. Choose them if you need several locks that open with the same key.
These locks include multiple cams with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them.
Aluminum locks are less corrosion resistant than stainless steel, but they are lighter in weight.
Stainless steel locks are more corrosion resistant than aluminum locks. They won’t rust in areas that are constantly exposed to moisture.
For technical drawings and 3-D models, click on a part number.

Handle | Straight Cam | Offset Cam | For Cutout | Mount. Plate | Mount. | Mount. Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance Range | Key No. | For Through Hole Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Fasteners Included | Screw Size | No. of | Dia., mm | Ctr.-to-Ctr. | Each | |
Black Powder-Coated Aluminum | ||||||||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||||||||||
1/2" | 1 3/32"-1 11/16" (Short) 3 15/32"-3 3/32" (Long) | CH751 | 1/2" | 2 11/16" | 2 7/16" | 1 7/8" | 3/4" | 1 7/8" | 3/4" | 3 3/8" | 3 3/8" | 3 15/16" | 3 15/16" | Yes | M6 | 4 | 7 | 3 1/16" | 0000000 | 000000 |
304 Stainless Steel—Polished | ||||||||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | ||||||||||||||||||||
1/2" | 1 3/32"-1 11/16" (Short) 3 15/32"-3 3/32" (Long) | CH751 | 1/2" | 2 11/16" | 2 7/16" | 1 7/8" | 3/4" | 1 7/8" | 3/4" | 3 3/8" | 3 3/8" | 3 15/16" | 3 15/16" | Yes | M6 | 4 | 7 | 3 1/16" | 0000000 | 000000 |

Key Number | Each | |
CH751 | 0000000 | 00000 |
Swing-Handle Keyed Alike Cam Locks
Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. All have a cam that rotates to keep doors closed. Choose these locks if you need several locks that open with the same key.
Locks with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance. All include multiple cams, so you can change the fixed latching distance.
Locks with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them.
Stainless steel and plastic locks are more corrosion resistant than zinc locks. They won’t corrode in areas that are constantly exposed to moisture. Plastic locks are also nonconductive and lighter in weight. However, they’re easier to drill into or tamper with than metal locks.
Locks with a stainless steel shutter block rain, snow, and dirt from entering the lock cylinder, which can cause internal damage. These locks also help keep your sealed enclosure's contents safe from water damage because they help maintain an enclosure's IP rating for low-pressure washdowns.
Padlockable locks can be used with a padlock for extra security.
For technical drawings and 3-D models, click on a part number.



Handle | Straight Cam | Offset Cam | For Cutout | Mounting Plate | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Key No. | Lg. | Wd. | Proj. | Rear Proj. | For Max. Padlock Shackle Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | Environmental Rating | Each | |
Black Powder-Coated Zinc | |||||||||||||||||||
Keyed | |||||||||||||||||||
1/8" | 5/8", 7/8", 1 1/4" | CH751 | 6" | 15/16" | 3/4" | 7/8" | __ | 1 3/4" | 11/16" | 1 3/4" | 3/4" | 2" | 1" | 7" | 1 1/2" | Yes | __ | 0000000 | 000000 |
316 Stainless Steel with Stainless Steel Shutter | |||||||||||||||||||
Keyed | |||||||||||||||||||
3/32" | 5/16", 11/16", 1 3/32" | 1333 | 5 11/16" | 13/16" | 5/16" | 2" | __ | 1 3/4" | 3/4" | 1 3/4" | 3/4" | 2" | 1" | 6 3/16" | 1 5/16" | Yes | IP65 | 0000000 | 000000 |
Keyed/Padlockable | |||||||||||||||||||
3/32" | 5/16", 11/16", 1 3/32" | 1333 | 5 1/2" | 1" | 15/16" | 7/8" | 3/8" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | 2" | 1" | 6 3/16" | 1 5/16" | Yes | IP65 | 0000000 | 000000 |

Handle | Straight Cam | For Cutout | Mounting Plate | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance Range | Key No. | Lg. | Wd. | Proj. | Rear Proj. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | Environmental Rating | Each | |
Black Nylon Plastic with Steel Cam and Stainless Steel Shutter | ||||||||||||||||
Keyed | ||||||||||||||||
3/32" | 23/32"-1 9/16" | 1333 | 5 1/2" | 1" | 13/16" | 15/16" | 1 3/4" | 3/4" | 2" | 1" | 6 3/16" | 1 5/16" | Yes | IP65 | 0000000 | 000000 |
Pry-Resistant Swing-Handle Keyed Alike Cam Locks


Stop burglars from breaking in with saws, screwdrivers, pliers, and other common tools—these locks meet RC2 security standards. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. These locks are keyed alike, so choose them if you need several locks that open with the same key.
Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. They come with multiple cams, so you can change their fixed latching distance. An O-ring stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 rating. For extra protection, they also have a shutter that guards the cylinder from water and dust.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | Offset Cam | For Cutout | Mounting Plate | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Key No. | For Through Hole Dia. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | Each | ||
Black Powder-Coated Zinc with Stainless Steel Shutter | |||||||||||||||||||
A | 3/32" | 5/16", 11/16", 1 3/32" | 1333 | 7/8" | 5 7/8" | 1 7/16" | 1 5/16" | 3/4" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | 1 13/16" | 1 13/16" | 7 1/8" | 2 1/4" | Yes | 0000000 | 0000000 |
Gray Powder-Coated Zinc with Stainless Steel Shutter | |||||||||||||||||||
B | 3/32" | 5/16", 11/16", 1 3/32" | 1333 | 7/8" | 5 9/16" | 1 7/16" | 1 3/8" | 11/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | 1 13/16" | 1 13/16" | 6 5/16" | 2 1/16" | Yes | 0000000 | 000000 |
Electronic Remote-Release Swing-Handle Keyed Alike Cam Locks
Remotely open your enclosure door with a card reader, manual release button, or other access control device. These locks have a switch that opens the lock when it receives power from your access system. They can also trigger a light, alarm, or other device to let you know when the lock is open or closed. Closing the door resets the switch. In case of emergency, these locks manually open with a key. Choose them if you need several locks that open with the same key.
Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything that passes by.
These locks have a cam that rotates 90° as you swing the handle, so they’re also known as quarter-turn locks. To adjust their fixed latching distance, they come with multiple cams. They also include a stainless steel shutter that blocks rain, snow, and dirt from entering the lock cylinder, which can cause internal damage.
For technical drawings and 3-D models, click on a part number.

Handle | Straight Cam | Offset Cam | For Cutout | Mounting Plate | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Key No. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | Current, A | Max. Switching Current @ Voltage | Each | |
Black Nylon Plastic with Stainless Steel Shutter | |||||||||||||||||||
24V DC—SPST-NO | |||||||||||||||||||
1/16" | 5/16", 11/16", 1 3/32" | 1333 | 5 1/2" | 1" | 3/4" | 15/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | 2" | 1" | 8 5/16" | 1 5/16" | Yes | 0.17 | 0.5 A @ 30 V DC | 0000000 | 0000000 |
Key No. | Pkg. Qty. | Pkg. | |
1333 | 2 | 0000000 | 00000 |
Lift-and-Turn Tight-Hold T-Handle Keyed Alike Cam Locks

Lift the handle and turn it a quarter-turn to close, then push it down to reach full compression for a secure hold. Also known as compression cam locks, these locks create a tighter hold than standard cam locks on cabinet doors and file drawers in high-vibration environments, making them useful for doors that have a seal. The tight hold also reduces rattling from vibration. Since these locks are keyed alike, you can open several locks with the same key. They have an adjustable latching distance and multiple cams to adapt to a wider range of distances than other locks with a fixed latching distance. They’re best when precise distances are unknown.
Aluminum locks have good corrosion resistance and they’re lighter in weight than stainless steel locks.
Stainless steel locks resist corrosion when exposed to constant moisture.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Latching Distance | Handle | Straight Cam | Offset Cam | Replacement Keys | |||||||||||||
For Max. Thick. | Short | Long | Key Number | For Through Hole Dia. | Lg. | Wd. | Projection | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | Max. Clamping Force, lbs. | Each | Each | ||
Black Powder-Coated Aluminum | |||||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | |||||||||||||||||
1/8" | 3/32"-9/16" | 2 3/8"-2 15/16" | CH751 | 7/8" | 2 15/16" | 2 9/16" | 1 3/16" | 1 7/8" | 3/4" | 1 7/8" | 3/4" | Yes | 225 | 0000000 | 000000 | 0000000 | 00000 |
304 Stainless Steel—Polished | |||||||||||||||||
Quarter-Turn Clockwise to Open or Quarter-Turn Counterclockwise to Open | |||||||||||||||||
1/8" | 3/32"-9/16" | 2 3/8"-2 15/16" | CH751 | 7/8" | 2 15/16" | 2 9/16" | 1 3/16" | 1 7/8" | 3/4" | 1 7/8" | 3/4" | Yes | 225 | 0000000 | 00000 | 0000000 | 0000 |
Lift-and-Turn Tight-Hold L-Handle Padlockable Cam Latches

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down to reach full compression. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal. The tight hold also reduces rattling from vibration. Add a padlock for extra security, so the handle can’t turn.
These locks include one cam with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance Range | For Through Hole Dia. | Lg. | Wd. | Projection | For Max. Padlock Shackle Dia. | Lg. | Wd. | Mounting Fasteners Included | For Use On | Environmental Rating | Each | |
Zinc—Dull | |||||||||||||
1 31/32" | 1 3/16"-2 11/32" | 5/8" | 3 5/16" | 7/8" | 1 1/16" | 5/16" | 1 25/32" | 23/32" | Yes | Metal, Plastic, Wood | IP65 | 0000000 | 000000 |
Black Painted Zinc | |||||||||||||
1 31/32" | 1 3/16"-2 11/32" | 5/8" | 3 5/16" | 7/8" | 1 1/16" | 5/16" | 1 25/32" | 23/32" | Yes | Metal, Plastic, Wood | IP65 | 0000000 | 00000 |
Washdown Swing-Handle Padlockable Cam Latches

Multiple gaskets help keep dust and high-pressure washdowns from entering through these latches. This helps you maintain your sealed enclosure's IP or NEMA rating. Often installed on electrical panels, these latches have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by.
Also known as quarter-turn latches, these latches have a cam that rotates 90° as you swing the handle. All come with multiple cams to change their fixed latching distance. Since you won’t have to adjust the cams into position, they are faster to install than those with an adjustable latching distance.
For technical drawings and 3-D models, click on a part number.
Handle | Offset Cam | For Cutout | Mounting Plate | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Lg. | Wd. | Projection | Rear Projection | For Max. Padlock Shackle Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | Environmental Rating | Each | |
Black Powder-Coated Zinc | ||||||||||||||||
1/8" | 9/16", 1 1/32", 1 1/2" | 5 1/8" | 15/16" | 7/8" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 6" | 1 1/2" | Yes | IP66, NEMA 4 | 0000000 | 000000 |
1/8" | 9/16", 1 1/32", 1 1/2" | 6" | 15/16" | 7/8" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 7" | 1 1/2" | Yes | IP66, NEMA 4 | 0000000 | 00000 |
Chrome-Plated Zinc—Polished | ||||||||||||||||
1/8" | 9/16", 1 1/32", 1 1/2" | 5 1/8" | 15/16" | 7/8" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 6" | 1 1/2" | Yes | IP66, NEMA 4 | 0000000 | 00000 |
1/8" | 9/16", 1 1/32", 1 1/2" | 6" | 15/16" | 7/8" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 7" | 1 1/2" | Yes | IP66, NEMA 4 | 0000000 | 00000 |
Swing-Handle Two-Way-Drive Padlockable Cam Locks

For a simple yet secure keying system, these locks open with a two-way key (sold separately), also called a double-bit key. It’s commonly used on industrial enclosures and other machinery, yet it’s more secure than a hex key or screwdriver. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. For extra protection, these locks have a concealed design that stops others from tampering with them using pliers and a spot to add a padlock.
Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. They come with multiple cams, so you can change their fixed latching distance. A gasket keeps dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP66 and NEMA 4 ratings.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Handle | Offset Cam | For Cutout | Mounting Plate | Keys | |||||||||||||||
For Max. Thick. | Latching Distance | Key Size, mm | Lg. | Wd. | Projection | Rear Projection | For Max. Padlock Shackle Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | Environmental Rating | Each | Each | ||
Black Powder-Coated Zinc | |||||||||||||||||||
1/8" | 9/16" 1 1/32" 1 1/2" | 3 | 5 1/8" | 15/16" | 3/4" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 6" | 1 1/2" | Yes | IP66 NEMA 4 | 0000000 | 000000 | 0000000 | 00000 |
Chrome-Plated Zinc—Polished | |||||||||||||||||||
1/8" | 9/16" 1 1/32" 1 1/2" | 3 | 6" | 15/16" | 3/4" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 7" | 1 1/2" | Yes | IP66 NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
1/8" | 9/16" 1 1/32" 1 1/2" | 5 | 5 1/8" | 15/16" | 3/4" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 6" | 1 1/2" | Yes | IP66 NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
1/8" | 9/16" 1 1/32" 1 1/2" | 5 | 6" | 15/16" | 3/4" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 7" | 1 1/2" | Yes | IP66 NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
Washdown Swing-Handle Keyed Alike Padlockable Cam Locks
Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for low- or high-pressure washdowns. Often installed on electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. All locks can be locked with a key as well as a padlock. Choose these locks if you need several locks that open with the same key.
Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. All come with multiple cams to change their fixed latching distance. Since you won’t have to adjust the cams into position, they are faster to install than those with an adjustable latching distance.
Use stainless steel locks in areas that are constantly exposed to moisture since they resist corrosion better than zinc locks.
Locks with a stainless steel shutter block rain, snow, and dirt from entering the lock cylinder, which can cause internal damage.
For technical drawings and 3-D models, click on a part number.

Locks | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Handle | Offset Cam | For Cutout | Mount. Plate | Replacement Keys | ||||||||||||||||
For Max. Thick. | Latching Distance | Key No. | Lg. | Wd. | Proj. | Rear Proj. | For Max. Padlock Shackle Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mount. Fasteners Included | No. of Keys Included | Environmental Rating | Each | Each | ||
Black Powder-Coated Zinc | ||||||||||||||||||||
1/8" | 9/16" 1 1/32" 1 1/2" | CH751 | 5 1/8" | 15/16" | 7/8" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 6" | 1 1/2" | Yes | 2 | IP66 NEMA 4 | 0000000 | 000000 | 0000000 | 00000 |
1/8" | 9/16" 1 1/32" 1 1/2" | CH751 | 6" | 15/16" | 7/8" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 7" | 1 1/2" | Yes | 2 | IP66 NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
Chrome-Plated Zinc—Polished | ||||||||||||||||||||
1/8" | 9/16" 1 1/32" 1 1/2" | CH751 | 5 1/8" | 15/16" | 7/8" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 6" | 1 1/2" | Yes | 2 | IP66 NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |
1/8" | 9/16" 1 1/32" 1 1/2" | CH751 | 6" | 15/16" | 7/8" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 7" | 1 1/2" | Yes | 2 | IP66 NEMA 4 | 0000000 | 00000 | 0000000 | 0000 |

Handle | Straight Cam | Offset Cam | For Cutout | Mount. Plate | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Lg. | Wd. | Proj. | Rear Proj. | For Max. Padlock Shackle Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mount. Fasteners Included | No. of Keys Included | Environmental Rating | Each | |
316 Stainless Steel—Polished | |||||||||||||||||||
3/32" | 5/16" 23/32" 1 3/32" | 5 1/2" | 1" | 3/4" | 7/8" | 3/8" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | 2" | 1" | 6 3/16" | 1 5/16" | Yes | 2 | IP65 | 0000000 | 0000000 |
Swing-Handle Hex-Drive Padlockable Cam Locks

Open and close these locks with a hex key (not included) for an uncomplicated keying system. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. Add a padlock for extra security.
Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. They come with multiple cams, so you can change their fixed latching distance. An O-ring stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 rating.
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Handle | Straight Cam | Offset Cam | For Cutout | Mounting Plate | Keys | |||||||||||||||
For Max. Thick. | Latching Distance | Hex Size, mm | Lg. | Wd. | Proj. | Rear Proj. | For Max. Padlock Shackle Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | Each | Each | ||
Black Powder-Coated Zinc | ||||||||||||||||||||
1/8" | 29/32", 1 1/16", 1 15/16" | 11 | 5 1/2" | 7/8" | 19/32" | 3/4" | 7/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | 5 7/8" | 1" | 6 1/4" | 1 3/8" | Yes | 0000000 | 000000 | 0000000 | 00000 |
Swing-Handle Triangle-Drive Padlockable Cam Locks

Open these locks with a triangle key (sold separately)—it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The cam rotates 90° as you swing the handle, so they’re also known as quarter-turn locks. When locked, the handle lies flat, which means it won’t snag anything passing by. For extra protection, these locks have a concealed design that stops others from tampering with them using pliers and a spot to attach a padlock.
A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP66 and NEMA 4 ratings. These locks come with multiple cams, so you can change their fixed latching distance.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Handle | Offset Cam | For Cutout | Mounting Plate | Keys | |||||||||||||||
For Max. Thick. | Latching Distance | Triangle Size, mm | Lg. | Wd. | Projection | Rear Projection | For Max. Padlock Shackle Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | Environmental Rating | Each | Each | ||
Chrome-Plated Zinc—Polished | |||||||||||||||||||
1/8" | 9/16" 1 1/32" 1 1/2" | 8 | 6" | 15/16" | 3/4" | 15/16" | 1/4" | 1 3/4" | 3/4" | 2" | 1" | 7" | 1 1/2" | Yes | IP66 NEMA 4 | 0000000 | 000000 | 0000000 | 00000 |
Swing-Handle Slotted-Drive Padlockable Cam Locks

A slotted screwdriver opens and closes these locks, so you can avoid a complicated keying system. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. Add a padlock for extra security.
Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. They come with multiple cams, so you can change their fixed latching distance. An O-ring stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 rating.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | Offset Cam | For Cutout | Mounting Plate | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Lg. | Wd. | Projection | Rear Projection | For Max. Padlock Shackle Dia. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | Mounting Hole Dia., mm | Environmental Rating | Each | |
Black Powder-Coated Zinc | |||||||||||||||||||
1/16" | 25/32", 15/16", 1 3/16" | 5 1/2" | 7/8" | 11/32" | 7/8" | 7/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | 5 7/8" | 1" | 6 5/16" | 1 3/8" | Yes | 6.5 | IP65 | 0000000 | 000000 |
Swing-Handle Combination Cam Locks

Latch and lock doors and cabinets with these swing-handle cam locks, and unlock them with a four-number combination code. They’re commonly used on server cabinets, electrical panels, and other telecommunication enclosures. For easy latching and unlatching, the handle swings smoothly when raised. It lies flat when locked, so it won’t snag anything passing by. Select the turn direction when mounting the cam. Locks come with a straight cam and two nonreversible offset cams to accommodate different latching distances. When installing, program a permanent number combination of your choice. These locks also come with two keys.
For technical drawings and 3-D models, click on a part number.
Handle | Straight Cam | Offset Cam | For Cutout | Mounting Plate | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | No. of Possible Combinations | For Use On | Each | |
Black Nylon Plastic | |||||||||||||||||||
5/64" | 11/16" 27/32" 1" | 5/16" | 5 1/2" | 15/16" | 5/8" | 13/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | 5 7/8" | 1" | 6 5/16" | 1 13/32" | Yes | 10,000 | Metal, Plastic, Wood | 00000000 | 000000 |
Washdown Swing-Handle Resettable Combination Cam Locks
Secure these locks with a three-number combination or a key. You can set a combination and reset it at any time. They’re keyed alike, so they’re useful if you need several locks that all open with the same key. Often used on sealed server cabinets and electrical panels, they have a gasket that keeps low-pressure washdowns and dust from getting through the lock. This helps you maintain an IP65 rating on sealed enclosures. Lift the handle and it swings smoothly to latch and unlatch doors. Also known as quarter-turn locks, they have a cam that rotates 90° as you swing the handle. When locked, the handle lies flat, so it won’t snag anything passing by. It also can’t be raised and turned, adding an additional layer of security.
These locks come with a straight and offset cam. Offset cams are reversible, so they can be mounted at two different latching distances.
For technical drawings and 3-D models, click on a part number.

Handle | Straight Cam | Offset Cam | For Cutout | Mounting Plate | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Key Number | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | No. of Possible Combinations | Environmental Rating | Each | |
Black Nylon Plastic with Steel Cam | |||||||||||||||||||
5/64" | 11/16" 27/32" 1 3/32" | EK333 | 5 1/2" | 7/8" | 13/16" | 13/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | 5 7/8" | 1" | 6 5/16" | 1 13/32" | Yes | 1,000 | IP65 | 000000 | 000000 |

Key Number | Each | |
EK333 | 00000000 | 00000 |