We will reply to your message within an hour.
These general purpose gas springs assist in opening lids, covers, windows, conveyors, and seats—similar to a hatchback opening on a car.
Stainless steel construction provides corrosion resistance for use in damp environments.
With no gas to leak out and a corrosion-resistant 316 stainless steel construction, these mechanical springs are built for long-term, maintenance-free use in wet environments.
A temperature-resistant seal allows these gas springs to withstand heat up to 392°F.
Mechanical operation means these springs have no seals to fail or gas to leak.
These gas springs have threaded ends so you can use them with any combination of end fittings, studs, and mounting brackets.
Made from stainless steel for excellent corrosion resistance in damp environments.
Often used to open lids, covers, windows, conveyors, and seats, these gas springs function similar to a hatchback opening on a car. They have an eyelet end fitting on each end.
Ensure you have the correct force for your application. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements.
Automatically locking when fully extended and made of 316 stainless steel to resist corrosion, these gas springs protect material and equipment underneath heavy loads in damp environments.
Protect material and equipment underneath heavy loads—these gas springs lock automatically when fully extended, ensuring they can't be closed until it's safe to do so.
Release gas from these springs until they supply the exact force you need—made of corrosion-resistant 316 stainless steel, they’re commonly used in wet environments.
Made from stainless steel for excellent corrosion resistance in damp environments. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements.
Pair one of these gas springs with a release control to stop and release the gas spring anywhere along the stroke with the push of a button or lever.
Color coded by force to help you choose the correct replacement, these gas springs generate high force.
Often used to replace coil springs in metal stamping and die-spring applications, these gas springs match the diameter and stroke length of coil die springs but offer much more force.
Attach ball socket end fittings to these studs to mount gas springs.
Install these ball studs into thin material—they’re riveted, so you only need access to one side.
Drill mounting holes where you need them—these brackets are made from aluminum, so they’re easy to machine.
Pair with ball socket end fittings to mount your gas spring in almost any position.
Since they’re at least twice as thick as standard ball stud mounting brackets, these brackets are best for high-force applications.
Made with thicker stainless steel than standard ball stud mounting brackets, these brackets work well in high-force applications exposed to damp conditions.
Pair these 90° angle brackets with ball socket end fittings to mount your gas spring in almost any position.
Made of easy-to-machine aluminum, these brackets come without mounting holes, so you can drill holes where you need them.
Stainless steel that’s twice as thick as standard 90° angle ball stud mounting brackets makes these brackets good for high-force applications exposed to damp conditions.
About twice as thick as standard 90° angle ball stud mounting brackets, these brackets are suitable for high-force applications.
Made from stainless steel, these brackets resist corrosion in damp environments.
Pair these 30° angle brackets with ball socket end fittings to mount your gas spring in almost any position.
Pair these 90° angle offset-arm brackets with ball socket end fittings to mount your gas spring in almost any position.
Attach eyelet end fittings to these brackets to mount gas springs.
These brackets secure eyelet end fittings from both sides to provide a strong hold on gas springs that get bumped or jostled. Mount on any panel, lid, or door.
Also known as tension and traction gas springs, these work in the opposite direction of other gas springs. Similar to a screen door closing, they're used to assist in closing covers, hoods, and doors.
Rods along the barrel of these cylinders secure the end caps and shield the barrel from impact.
Cylinders have two parallel piston rods that prevent twisting as they extend and retract.
Get the power and stroke of other tie rod cylinders in less than half the space.
These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed.
Made to fit the most common mounting footprint, these cylinders have an NFPA (National Fluid Power Association) industry-standard footprint, ensuring easy interchangeability.
Made with an NFPA industry standard footprint and a stainless steel body, these cylinders are easily interchanged with the most common mounting footprint and withstand chemicals, corrosive solutions, and washdowns.
Hold your piston's position during an emergency stop or power loss to keep your load safely in place. These rod locks also prevent your piston from drifting past its stopped position as it wears and loses precision.
An extruded-aluminum body means these cylinders have no open spaces for debris to collect.
Create linear motion with the most popular of our air cylinders.
At less than two inches in length, these cylinders actuate small devices in spots where other cylinders don’t fit.
More basic and cost effective than double-acting cylinders, these single-acting cylinders exert force in one direction and have a spring to return the rod to its original position.
Built to withstand hard knocks, these cylinders have a thick barrel wall for more durability than standard air cylinders.
Also known as air clamps, these cylinders are used to apply force in holding applications.
Unlike other air cylinders that push and pull one object, these double-ended cylinders push one object while pulling another.
These cylinders thread directly into your equipment, taking minimal space.
Keep tools from twisting while moving them back and forth.
Also known as pancake cylinders, these deliver as much force as other cylinders, but with a shorter stroke to function in small spaces.
Able to resist corrosive solutions and chemical environments, these cylinders withstand washdown conditions.
Threaded through-holes in each corner allow you to mount these cylinders directly to equipment or mount with attachments.
For easy interchangeability, the mounting footprints of these cylinders meet NFPA and JIC industry standards.
Small yet powerful, these cylinders thread into a system for workholding applications.
Made of 303 stainless steel, these hydraulic cylinders move heavy loads without corroding in wet areas.
With a small body size, these cylinders fit into tight spaces but offer similar push forces to standard hydraulic cylinders.
These cylinders have a magnetic piston that can be used with tie rod-mount proximity switches to electronically indicate piston position. For easy interchangeability, their mounting footprint meets NFPA or NFPA and JIC industry standards.