Electric Stationary Lift Tables
An electric motor and a hydraulic pump perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Material | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
Hand-Operated with 115V AC Internal Motor | |||||||||||||||||
| 2,000 | 53" | 31" | 8 1/2"-38 1/2" | 2 1/2 | Steel | 25 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 000000000 |
| 4,000 | 52" | 39" | 8 1/2"-39 1/2" | 1 | Steel | 25 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 6,000 | 59" | 40" | 9 1/2"-48" | 3/4 | Steel | 15 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 00000000 | 00000000 |
| 6,000 | 78" | 40" | 11"-60" | 3/4 | Steel | 15 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 00000000 | 00000000 |
Hand-Operated with 120V AC External Motor | |||||||||||||||||
| 550 | 32" | 19 1/2" | 6"-28" | 2 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
| 660 | 40" | 20" | 9 1/2"-54" | 3 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
| 1,100 | 25 1/2" | 18" | 8 1/2"-33 1/2" | 1 3/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
| 1,100 | 40" | 20" | 6"-31 1/2" | 2 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
| 1,650 | 40" | 20" | 6"-31 1/2" | 1 1/2 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Hand-Operated with 120V AC Internal Motor | |||||||||||||||||
| 2,000 | 48" | 36" | 8 1/2"-38 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 12 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
Hand-Operated with 480V AC Internal Motor | |||||||||||||||||
| 3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 4,000 | 52" | 39" | 8 1/2"-39 1/2" | 1 | Steel | 25 cycles per hour | Three | 4.8A | __ | __ | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 6,000 | 78" | 40" | 11"-60" | 3/4 | Steel | 15 cycles per hour | Three | 4.8A | __ | __ | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 00000000 | 00000000 |
Foot-Operated with 115V AC Internal Motor | |||||||||||||||||
| 4,000 | 52" | 39" | 8 1/2"-39 1/2" | 1 | Steel | 25 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
| 6,000 | 59" | 40" | 9 1/2"-48" | 3/4 | Steel | 15 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 00000000 | 00000000 |
| 6,000 | 78" | 40" | 11"-60" | 3/4 | Steel | 15 cycles per hour | Single | 20A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 00000000 | 00000000 |
Foot-Operated with 480V AC Internal Motor | |||||||||||||||||
| 3,000 | 48" | 28" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 000000 | 00 |
| 6,000 | 78" | 40" | 11"-60" | 3/4 | Steel | 15 cycles per hour | Three | 4.8A | __ | __ | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 00000000 | 00000000 |
Floor-Load Electric Stationary Lift Tables
The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control. A toe guard at the base of the table provides safety for the operator.
Warning: Never use to lift people.
Floor-Load Electric Stationary Lift Tables | Optional Loading Ramp | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Includes | Each | Each | ||
With 120V AC Motor | ||||||||||||||||||
| 550 | 40" | 23 1/2" | 3"-29 1/2" | 2 1/2 | 10 | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 6-ft. Long Hydraulic Hose | 0000000 | 000000000 | 0000000 | 0000000 |
| 1,100 | 40" | 23 1/2" | 3"-30" | 1 1/4 | 10 | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 6-ft. Long Hydraulic Hose | 0000000 | 00000000 | 0000000 | 000000 |
Floor-Load Electric Stationary Lift Tables for Pallets
Load pallets onto these tables directly from a pallet truck—no ramps or forklifts needed. When fully lowered, they sit close to the ground, so it’s easy to move loads on and off the floor. Roll a pallet truck into the center and lower the pallet onto the table. An electric motor and a hydraulic pump perform repetitive lifting and positioning with the push of a button or foot pedal. All tables have a toe guard at the base to protect you from foot injuries when the table is lowered.
Style A tables are hand-operated and have a U-shaped platform, so you can guide your pallet truck into the open center. Use them with plastic and wooden pallets with open bottoms, or with wire containers.
Style B tables are foot-operated and have a wide, solid platform that only sits 1/2" off ground when lowered for versatile, easy loading. Roll a pallet truck, cart, or trolley directly onto them. They hold open- and closed-bottom pallets, large containers, and bulky or irregularly shaped items.
| Style | Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Material | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Specifications Met | Includes | Each | |
Hand-Operated with 115V AC Motor | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 3,000 | 63" | 53 1/2" | 4 1/8"-33 7/8" | 3/4 | 6 | Powder-Coated Steel | 10 cycles per hour | Single | 18.5A | Three Prong | 16 | 8 | ANSI MH 29.1 | 8-ft. Long Hydraulic Hose | 0000000 | 000000000 |
Foot-Operated with 460V AC Motor | |||||||||||||||||
| B | 4,000 | 51 1/2" | 44" | 1/2"-36" | 3/4 | __ | Painted Steel | 12 cycles per hour | Three | 3.1A | __ | 2 | 8 | ANSI MH 29.1 | 8-ft. Long Hydraulic Hose | 0000000 | 00000000 |
Turntable-Top Electric Stationary Lift Tables
The turntable rotates to reduce reaching. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Turntable Dia. | Material | Duty Cycle | Motor Full Load Current | Plug Type | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
Round with 115V AC Motor | |||||||||||||||||
| 2,000 | __ | __ | 11 1/2"-41 1/2" | 2 1/2 | 10 | 43" | Steel | 25 cycles per hour | 20A | Three Prong | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 000000000 |
| 4,000 | __ | __ | 11 1/2"-41 1/2" | 1 | 10 | 43" | Steel | 25 cycles per hour | 20A | Three Prong | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
Square with 120V AC Motor | |||||||||||||||||
| 3,500 | 48" | 48" | 8"-44" | 3/4 | 7 | 43" | Steel | 20 cycles per hour | 17A | Three Prong | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
Long-Tabletop Electric Stationary Lift Tables
An extra-large tabletop provides plenty of room for oversized loads. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Material | Duty Cycle | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
With 120V AC Motor | |||||||||||||||||
| 2,000 | 96" | 48" | 6 1/2"-42 1/2" | 3/4 | 7 | Steel | 12 cycles per hour | 8.4A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 0000000000 | 0000000 | 000000000 |
Tilting Electric Stationary Lift Tables
Raise and tilt heavy loads for easy access at the angle you need. Often used to position containers, pallets, and other heavy items in loading docks and assembly areas, these tables help minimize strain during repetitive tasks. A motor-powered hydraulic pump adjusts loads with the push of a button. Tilt these tables up to a 40° angle. All have a retaining lip to keep items from sliding off when tilted.
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Max. Tilt Angle | Lip Ht. | Material | Color | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Wire Lead Lg. | Control Cord Lg., ft. | Each | |
With 115V AC Motor | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2,000 | 48" | 48" | 8"-42 1/2" | 1 1/4 | 3 | 40° | 12" | Painted Steel | Blue | 10 cycles per hour | Single | 11A | Three Prong | 9 | __ | 8 | 00000000 | 000000000 |
With 460V AC Motor | ||||||||||||||||||
| 4,000 | 48" | 48" | 8"-42 1/2" | 3 | 3 | 40° | 12" | Painted Steel | Blue | 15 cycles per hour | Three | 3A | __ | __ | 24" | 8 | 00000000 | 00000000 |