Foot-Operated Mobile Lift Tables
These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.
Tables with floor lock stay stationary while in use.
Warning: Do not roll or reposition while under load. Never use to lift people.

Capacity, lbs. | Lg. | Wd. | Ht. | Elevation per Stroke | Tabletop Ga. | Material | Handle Ht. | Wheel Configuration | Brake Type | Wheel Material | Wheel Dia. | Specifications Met | Each | |
600 | 32" | 20" | 10"-33" | 1" | 7 | Steel | 35 1/2" | Two Swivel and Two Rigid Casters | Floor Lock | Phenolic Plastic | 5" | ANSI MH 29.1 | 0000000 | 000000000 |
1,000 | 36" | 24" | 9 1/2"-33" | 5/8" | 7 | Steel | 35 1/2" | Two Swivel and Two Rigid Casters | Floor Lock | Phenolic Plastic | 5" | ANSI MH 29.1 | 0000000 | 00000000 |
1,000 | 48" | 24" | 9 1/2"-45" | 3/4" | 7 | Steel | 35 1/2" | Two Swivel and Two Rigid Casters | Floor Lock | Phenolic Plastic | 5" | ANSI MH 29.1 | 0000000 | 00000000 |
1,000 | 48" | 36" | 9 1/2"-45" | 3/4" | 7 | Steel | 35 1/2" | Two Swivel and Two Rigid Casters | Floor Lock | Phenolic Plastic | 5" | ANSI MH 29.1 | 0000000 | 00000000 |
1,500 | 48" | 24" | 9 1/2"-45" | 1/2" | 7 | Steel | 35 1/2" | Two Swivel and Two Rigid Casters | Floor Lock | Phenolic Plastic | 5" | ANSI MH 29.1 | 0000000 | 00000000 |
Battery-Powered Mobile Lift Tables
Push the button and a hydraulic pump adjusts the load. Tables run on a motor that is powered by a sealed, maintenance-free battery and built-in charger. The NEMA rating only applies to the push-button control. The control has a self-retracting cord. A floor lock keeps the table stationary.
Warning: Do not roll or reposition while under load. Never use to lift people.

Wheel | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Duty Cycle | Batteries Included | Battery Charger Current, A | Battery Recharge Time, hrs. | Plug Type | Control Cord Lg., ft. | Tabletop Ga. | Material | Handle Ht. | Material | Dia. | Environmental Rating | Each | |
1,000 | 36" | 24" | 9 1/2"-33" | 2 1/4 | 15 cycles per hour | Yes | 5 | 6-8 | Three Prong | 2 1/2-8 | 7 | Steel | 35 1/2" | Phenolic Plastic | 5" | NEMA 1 | 0000000 | 000000000 |
1,000 | 48" | 24" | 9 1/2"-45" | 2 1/2 | 15 cycles per hour | Yes | 5 | 6-8 | Three Prong | 2 1/2-8 | 7 | Steel | 35 1/2" | Phenolic Plastic | 5" | NEMA 1 | 0000000 | 00000000 |
1,500 | 48" | 24" | 9 1/2"-45" | 1 3/4 | 15 cycles per hour | Yes | 5 | 6-8 | Three Prong | 2 1/2-8 | 7 | Steel | 35 1/2" | Phenolic Plastic | 5" | NEMA 1 | 0000000 | 00000000 |
1,500 | 48" | 36" | 9 1/2"-45" | 1 3/4 | 15 cycles per hour | Yes | 5 | 6-8 | Three Prong | 2 1/2-8 | 7 | Steel | 35 1/2" | Phenolic Plastic | 5" | NEMA 1 | 0000000 | 00000000 |

Battery Voltage | Each | |
12V DC | 0000000 | 0000000 |

Each | ||
0000000 | 0000000 |

Each | ||
0000000 | 000000 |
Electric Stationary Lift Tables




An electric motor and a hydraulic pump perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Material | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
Hand-Operated with 120V AC External Motor | |||||||||||||||||
550 | 32" | 19 1/2" | 6"-28" | 2 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
660 | 40" | 20" | 9 1/2"-54" | 3 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
1,100 | 25 1/2" | 18" | 8 1/2"-33 1/2" | 1 3/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
1,100 | 40" | 20" | 6"-31 1/2" | 2 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
1,650 | 40" | 20" | 6"-31 1/2" | 1 1/2 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Hand-Operated with 120V AC Internal Motor | |||||||||||||||||
2,000 | 48" | 28" | 8 1/2"-38 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 12 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
2,000 | 48" | 36" | 8 1/2"-38 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 12 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
3,000 | 48" | 28" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
Hand-Operated with 480V AC Internal Motor | |||||||||||||||||
3,000 | 48" | 28" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
Foot-Operated with 120V AC Internal Motor | |||||||||||||||||
3,000 | 48" | 28" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
Foot-Operated with 480V AC Internal Motor | |||||||||||||||||
3,000 | 48" | 28" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
Electric Stationary Lift Tables for Tight Spaces



These tables are compact, yet provide the lifting capacity of standard lift tables. They have an electric motor and a hydraulic pump to perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Material | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
With 120V AC External Motor | ||||||||||||||||||
500 | 25" | 12" | 5"-30" | 1 3/4 | 7 | Steel | 12 cycles per hour | Single | 8.4A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
With 120V AC Internal Motor | ||||||||||||||||||
2,000 | 42" | 18" | 6"-42" | 1 | 7 | Steel | 12 cycles per hour | Single | 8.4A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 00000000 |
Floor-Load Electric Stationary Lift Tables

The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control. A toe guard at the base of the table provides safety for the operator.
Warning: Never use to lift people.
Floor-Load Electric Stationary Lift Tables | Optional Loading Ramp | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Includes | Each | Each | ||
With 120V AC Motor | ||||||||||||||||||
550 | 40" | 23 1/2" | 3"-29 1/2" | 2 1/2 | 10 | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 6-ft. Long Hydraulic Hose | 0000000 | 000000000 | 0000000 | 0000000 |
1,100 | 40" | 23 1/2" | 3"-30" | 1 1/4 | 10 | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 6-ft. Long Hydraulic Hose | 0000000 | 00000000 | 0000000 | 000000 |
Long-Tabletop Electric Stationary Lift Tables


An extra-large tabletop provides plenty of room for oversized loads. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Material | Duty Cycle | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
With 120V AC Motor | |||||||||||||||||
2,000 | 96" | 48" | 6 1/2"-42 1/2" | 3/4 | 7 | Steel | 12 cycles per hour | 8.4A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 0000000000 | 0000000 | 000000000 |
Turntable-Top Electric Stationary Lift Tables



The turntable rotates to reduce reaching. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Turntable Dia. | Material | Duty Cycle | Motor Full Load Current | Plug Type | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
Round with 115V AC Motor | |||||||||||||||||
2,000 | __ | __ | 11 1/2"-41 1/2" | 2 1/2 | 10 | 43" | Steel | 25 cycles per hour | 20A | Three Prong | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 000000000 |
4,000 | __ | __ | 11 1/2"-41 1/2" | 1 | 10 | 43" | Steel | 25 cycles per hour | 20A | Three Prong | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
Square with 120V AC Motor | |||||||||||||||||
3,500 | 48" | 48" | 8"-44" | 3/4 | 7 | 43" | Steel | 20 cycles per hour | 17A | Three Prong | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
Air-Powered Stationary Lift Tables


Connect these tables to your compressed air system; a hydraulic pump and an air-driven motor make repetitive lifting and positioning less of a chore. Tables have a compact design, so they fit in confined spaces.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Tabletop Ga. | Material | Air Pressure, psi | Air Inlet Pipe Size | Air Inlet Thread Type | Air Inlet Gender | Elevation Speed, in./sec. | Hose Lg., ft. | Control Cord Lg., ft. | Specifications Met | Each | Each | ||
550 | 32" | 19 1/2" | 6"-28" | 13 | Steel | 40 | 1/4 | NPT | Female | 1/2 | 6 | 6 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
660 | 40" | 20" | 9 1/2"-54" | 10 | Steel | 40 | 1/4 | NPT | Female | 3/4 | 6 | 6 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
1,100 | 40" | 20" | 6"-31 1/2" | 10 | Steel | 40 | 1/4 | NPT | Female | 1/2 | 6 | 6 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Foot-Operated Stationary Lift Tables


Make repetitive lifting and positioning less of a chore. These tables have a foot lever and hydraulic pump to raise the load. A hand knob provides controlled lowering. All have a compact design, so they fit in confined spaces.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation per Stroke | Tabletop Ga. | Material | Specifications Met | Each | Each | ||
440 | 25 1/2" | 19 1/2" | 5"-21" | 1/2" | 13 | Steel | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
550 | 32" | 19 1/2" | 5"-28" | 1/2" | 13 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
660 | 40" | 20" | 9 1/2"-54" | 3/4" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
1,100 | 40" | 20" | 6"-31 1/2" | 1/2" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
1,650 | 40" | 20" | 6"-31 1/2" | 3/8" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Air-Actuated Auto-Leveling Pallet Stands—Not for Lifting

These stands keep the top of your load at a convenient height; an air cylinder automatically returns the stand to your set height as you add or remove parts of your load. The turntable rotates 360° to reduce reaching. A maximum of 60 psi of air is needed for setup but not for operation. Adjust height before adding pallets. A three-position knob allows capacity adjustments while a relief valve prevents pressure build-up to provide overload protection. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.
Warning: Not for lifting. Never use to support people.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Turntable Dia. | Lg. | Wd. | Ht. | Material | Actuator Material | Pipe Size | Thread Type | Gender | Forklift Entry | Specifications Met | Each | |
250-4,000 | 43" | 49" | 24 3/8" | 10 1/2"-30 1/2" | Steel | Rubber | 1/4 | NPT | Female | Yes | ANSI MH 29.1 | 000000 | 000000000 |