The top extends beyond the base for easier access to tight spaces and bench tops. Foot levers and a hydraulic pump lower and raise the load. Wheel brakes keep the table stationary.

Warning: Do not roll or reposition while under load. Never use to lift people.

An extra-long, reinforced tabletop gives you plenty of room for oversized loads. Foot levers and a hydraulic pump lower and raise the load. Two floor locks keep the table stationary.

Warning: Never use to lift people.

The tabletop rotates 360° to reduce reaching and locks in any position. Tables have foot levers and a hydraulic pump to lower and raise the load. A mechanical vent prevents pressure build-up to provide overload protection. The floor lock keeps the table stationary.

Warning: Do not roll or reposition while under load. Never use to lift people.

Get lower to the ground than with our other mobile lift tables. Just roll a pallet truck to the edge of these tables to slide a pallet into place—no ramps or forklifts needed. Use the foot lever and hydraulic pump to raise loads to your ideal height. Turn the hand knob for controlled lowering. Swivel casters with brakes make steering and positioning easy.

Warning: Never use to lift people.

Transport loads over gravel, cracked concrete, grass, and other uneven terrain. These tables have large pneumatic tires that support heavy loads and absorb more shock than standard solid rubber wheels. Use them indoors and outdoors.

Multiple tie-down rings on the frame let you secure loads with straps or bungees to keep them from sliding. Store tools, parts, or small items in the compartment below the handle. A foot lever and hydraulic pump raise the load. To lower the load, use either the hand or foot valve.

Warning: Never use to lift people.

Collapse these lift tables and carry them like a briefcase. Made of lightweight aluminum, they weigh just 30 lbs. so they’re easy to store, transport in a vehicle, and carry up or down stairs. Lower the platform, fold down the push handle, and pick them up with the built-in side handle. And since they’re aluminum, they also resist corrosion in wet environments. Use the foot lever and hydraulic pump to raise or lower loads to your ideal height.

Warning: Never use to lift people.

Easily load and unload heavy material from one surface to another—just slide it across the roller top of these tables. They’re useful for assembly lines, packaging stations, and shipping areas where you need to transfer material onto or off a conveyor. Pull out the retractable end stops to keep loads secure as you move them throughout your facility. Raise these tables to your workstation height using the hydraulic foot pump. Turn the knob for controlled lowering.

Move these tables where you need them, then use the hand crank to adjust your work to a comfortable height. They are entirely mechanical, so they're ideal for precise positioning—as you crank, the tabletop moves in consistent increments. These tables also hold their exact height for as long as you need, unlike hydraulic lift tables, which sag over time under heavy loads. Remove the handle when you’re done cranking.

Scissor-style tables are easier to store than four-post tables because they lower to a shorter height.

Four-post tables handle twice the load of scissor-style tables thanks to their heavy duty construction. They also have fewer moving parts, so there’s fewer places that could pinch your fingers. Attach the handle on either end to crank. Each end has two attachment points for the crank: one for quick height adjustments and one for slower, more controlled positioning. To keep these tables from rolling away, press the foot pedal to activate the floor lock.

Cast iron wheels are strong and long-lasting—they resist wear and heat. Polyurethane wheels are nonmarking, abrasion resistant, and shock absorbing. Use them on all floor types, including areas with debris.

Warning: Never use to lift people.

Turn the hand wheels to adjust the load and tilt it up to 30° for a more ergonomic angle. Brakes on two of the casters keep the table stationary.

Warning: Do not roll or reposition while under load. Never use to lift people.

Push the button and a hydraulic pump adjusts the load. Tables run on a motor that is powered by a sealed, maintenance-free battery and built-in charger. To keep from moving while you load or unload, these tables come with either a floor lock or wheel brakes.

Post-style lift tables have posts that raise the tables straight up—no pinch points like scissor-style lift tables.

Warning: Never use to lift people.

Powered for driving and lifting, these tables take the effort out of positioning heavy loads. The powered drive makes them ideal for moving loads long distances in your facility. A throttle controls forward and reverse movement, while a battery-powered hydraulic pump raises and lowers loads with the push of a button. Adjust the speed to match the pace of your task. Compared to manual lift trucks, these tables offer greater control and more precise adjustments.

Top to bottom, these tables are outfitted with safety features. When they back up, a beeper sounds to alert people nearby. An emergency stop button immediately halts movement. If you release the control or the table is stationary, an automatic brake engages to prevent unintended movement on inclines or uneven surfaces.

The front casters are pneumatic and shock absorbent, while the rear wheels are made of polyurethane and resist abrasion. All wheels are nonmarking. These tables come with a charging cord—just plug it into a standard wall outlet.

Pump a foot pedal with a single-speed hydraulic pump to raise and lower loads. Platforms support material directly without an additional pallet and have a back plate to protect the truck. Engage the floor lock or wheel brakes before lifting or lowering a load.

Trucks with hand-truck base pick up, move, and position loads like a conventional hand truck. The plate is tapered.

Trucks with two swivel casters and two axle-mounted wheels are easy to steer.

Polyurethane wheels are nonmarking, abrasion-resistant, and shock-absorbing. Use them on all floor types, including areas with debris. Rubber wheels absorb shock, are quiet, and roll over smooth or rough surfaces. Phenolic wheels are nonmarking and roll best on smooth surfaces, but can be noisy.

Warning: Never use to lift people.

Collapse these trucks small enough to fit in your trunk—without sacrificing lift. The mast telescopes up and down, and the platform and base fold into the truck for compact storage. Even though it’s compact, the mast can lift loads about 5 ft. high. Engage the floor lock then crank the handle to raise and lower loads. When you stop cranking, a brake keeps the load in place. The platform ramp goes down to the floor, so you can slide loads on and off.

Made of aluminum, these trucks are lighter than steel and stainless steel models, making them easier to lift and maneuver. They also resist corrosion in wet environments. Wheels on the back and top let you roll them easily around your jobsite and into storage. The rubber wheels are quiet, absorb shock, and roll smoothly on both rough and smooth surfaces.

Warning: Never use to lift people.

Maneuver these compact trucks in crowded storage and server rooms. Four swivel casters let you navigate sideways, diagonally, and even in circles with minimal effort. Load materials right onto the platform—no pallet required. Once the truck is in place, engage the wheel brakes to keep it stable. Crank the handle to raise and lower loads. The wheels are rubber, so they absorb shock, are quiet, and roll over smooth or rough surfaces.

Warning: Never use to lift people.

Crank a handle or pump a foot pedal to raise and lower loads. Two swivel casters and two axle-mounted wheels make these lift trucks easy to steer. Engage the floor lock or wheel brakes before lifting or lowering a load.

Trucks with hand crank adjust by turning a crank. A brake keeps the load in place. Straddle bases have a greater distance between the legs for easier access to loads on pallets.

Adjustable-width bases better straddle pallets and other items for easier access to the load.

Counterbalanced and closed bases have shorter legs for closer access to the load.

Reversible forks can be inverted to gain additional lifting height.

Rubber wheels absorb shock, are quiet, and roll over smooth or rough surfaces. Polyurethane wheels are nonmarking, abrasion resistant, and shock absorbing. Use them on all floor types, including areas with debris.

Optional platforms can be added to the lift truck to support material directly without an additional pallet.

Warning: Never use to lift people.

Platforms support material directly without an additional pallet. A hydraulic pump powered by a rechargeable battery raises and lowers loads with the push of a button. The push-button control has a self-retracting cord. Two swivel casters at the rear of the lift truck makes steering and pivoting easy. Once the truck is in place, engage the floor lock to lift and lower loads. They have nonmarking phenolic wheels that roll best on smooth surfaces.

Warning: Never use to lift people.