Lifting Boom | McMaster-Carr

Filter by

Weight Capacity @ 6 ft.

Length

4 1/2 ft. to 7 1/2 ft.

7 1/2 ft. to 12 1/2 ft.

Material

Boom Adjustability

Horizontally Telescoping

Vertically Adjustable

Weight Capacity

Less than 2,000 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 3,999 lb.

4,000 lb. to 4,999 lb.

Color

Mounting Location

Weight Capacity @ 4 ft.

DFARS Specialty Metals

Shape

Overall Height

REACH

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

Not Compliant

Manufacturer Model Number

Weight Capacity @ 12 ft.

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Weight Capacity @ 5 ft.

Fork Pocket Spacing Center-to-Center

Fork Length

Finish

Weight Capacity @ 7 ft.

Adjustment Movement

Hook Movement

For Use With

Dremel Grinders for Bits and Burs

Grinders for Bits and Burs

Weight Capacity @ 3 ft.

54 Products

Forklift Booms

Shown Installed on Forklift

Slide these booms onto forklift forks to handle long, cumbersome loads. They secure to the forklift carriage with the included safety chains. These booms are labeled with capacity for each hook position. First hook position is measured from the fork pocket end.

Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.

Warning: Never use to lift people or items over people.

Forklift Booms


Style A	Style B

Style C	Style D

Horizontally Telescoping—Horizontally telescoping booms extend and retract lengthwise to handle extra-long loads and reach into hard-to-access areas.

Vertically-Adjustable Boom—Those that also adjust vertically move in and out and up and down for the most flexible load placement. To access tall loads, raise the hook position and lock the boom into place with the pin.

Style C—Styles C and G are designed for tall loads where more bottom clearance is needed. The fixed section has three hook positions spaced 6” apart.

		Wt. Cap., lb.													For Max. Fork			Hook
	Style	@ 3 ft.	@ 4 ft.	@ 5 ft.	@ 6 ft.	@ 7 ft.	@ 8 ft.	@ 9 ft.	@ 10 ft.	@ 11 ft.	@ 12 ft.	@ 66 In.	Fork Pocket Spacing Ctr.-to-Ctr.	For Min. Fork Lg.	Wd.	Ht.	Material	Type	Movement	Opening Wd.	First Hook Position, ft.	Lg., ft.		Each
Fixed



		A	4,000	3,700	3,500	3,200	—	—	—	—	—	—	—	11"	24"	7 1/2"	2 1/2"	Painted Steel	Latching Grab	Swivel Rigid	1" 5/8"	3	7	3638T111	0000000


		Horizontally Telescoping



				B	4,000	3,700	3,500	3,200	3,000	2,700	2,500	2,200	2,000	1,700	—	24"	24"	7 1/2"	2 1/2"	Painted Steel	Latching Grab	Swivel Rigid	1" 5/8"	3	7 1/2 to 12 1/2	3638T112	00000000


				B	6,000	5,000	4,500	4,000	3,500	3,000	2,600	2,300	2,000	1,800	—	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching Latching	Swivel Swivel	1" 1"	3	7 1/2 to 12 1/2	3638T113	00000000
				B	8,000	6,600	6,000	5,300	4,600	4,000	3,500	3,000	2,600	2,200	—	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching Latching	Swivel Swivel	1" 1 1/4"	3	7 to 12 1/2	3638T114	00000000
				C	3,700	3,200	2,700	2,200	1,700	—	—	—	—	—	2,500	24"	24"	7 1/2"	2 1/2"	Painted Steel	Latching Grab	Swivel Rigid	1" 5/8"	2 1/2	4 1/2 to 8	3638T115	00000000


				Horizontally Telescoping, Vertically Adjustable (37° Maximum Lifting Angle)



						D	4,000	3,700	3,500	3,200	3,000	2,700	2,500	2,200	2,000	1,700	—	24"	24"	7 1/2"	2 1/2"	Painted Steel	Latching Grab	Swivel Rigid	1" 5/8"	3	7 1/2 to 12 1/2	3638T116	00000000


						D	6,000	5,000	4,500	4,000	3,500	3,000	2,600	2,300	2,000	1,800	—	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching Latching	Swivel Swivel	1" 1"	3	7 1/2 to 12 1/2	3638T117	00000000
						D	8,000	6,600	6,000	5,300	4,600	4,000	3,500	3,000	2,600	2,200	—	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching Latching	Swivel Swivel	1" 1 1/4"	3	7 to 12 1/2	3638T118	00000000

Replacements for Forklift Booms

Replacement Safety-Pin Shackles

Image of Product. Front orientation. Contains Annotated. Shackles.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.

	Thk.	Pin Dia.	Opening Wd.	Inside Lg.	Inside Wd.	Specs. Met		Each
Galvanized Steel



	4,400	1/2"	21/32"	13/16"	1 29/32"	1 5/16"	ASME B30.26, Fed. Spec. RR-C-271	3555T51	000000


	7,100	5/8"	25/32"	1 1/16"	2 13/32"	1 23/32"	ASME B30.26, Fed. Spec. RR-C-271	3555T52	00000
	10,400	3/4"	29/32"	1 1/4"	2 13/16"	2"	ASME B30.26, Fed. Spec. RR-C-271	3555T53	00000

Replacement Hooks with Swivel

Image of Product. Front orientation. Hooks.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

Note: Capacities are for vertical lifting only.

	Hook		Eye
Wt. Cap., lb.	Opening Wd.	Usable Lg.	ID	Thk.	Specs. Met	For Use With		Each
4,400	1 1/16"	6 1/8"	1 3/4"	5/8"	ASME B30.10	Chain, Wire Rope	3525T613	0000000
6,600	1 3/16"	6 1/2"	1 3/4"	5/8"	ASME B30.10	Chain, Wire Rope	3525T614	000000
11,000	1 1/2"	7 1/2"	2"	3/4"	ASME B30.10	Chain, Wire Rope	3525T615	000000

Includes		Each
Latch, Spring, Nut and Bolt	35315T43	000000
Latch, Spring, Nut and Bolt	35315T44	00000
Latch, Spring, Nut and Bolt	35315T45	00000

Forklift Booms—Made in the U.S.


Style E	Style F

Style G	Style H

Replacement Pin Housing Rebuild Kits	Replacement Pull Pins

Booms that are made in the U.S. have a label that confirms they are manufactured in the United States.

Horizontally Telescoping—Horizontally telescoping booms extend and retract lengthwise to handle extra-long loads and reach into hard-to-access areas.

Style G—Styles C and G are designed for tall loads where more bottom clearance is needed. The fixed section has three hook positions spaced 6” apart.

	Forklift Booms																							Replacement Pin Housing Rebuild Kits		Replacement Pull Pins
		Wt. Cap., lb.												For Max. Fork			Hook
	Style	@ 3 ft.	@ 4 ft.	@ 5 ft.	@ 6 ft.	@ 7 ft.	@ 8 ft.	@ 9 ft.	@ 10 ft.	@ 11 ft.	@ 12 ft.	Fork Pocket Spacing Ctr.-to-Ctr.	For Min. Fork Lg.	Wd.	Ht.	Material	Type	Movement	Opening Wd.	First Hook Position, ft.	Lg., ft.		Each		Each		Each
Fixed



		E	—	4,000	3,500	3,000	2,500	2,000	—	—	—	—	11 1/2"	24"	5 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 1/16"	4	8	3638T31	000000000	———	0	———	0


		Horizontally Telescoping



				F	4,000	4,000	4,000	4,000	3,200	2,600	2,200	1,900	1,600	1,500	15"	30"	7 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 1/16"	3	7 to 12	3638T22	00000000	3638T42	0000000	———	0


				F	6,000	6,000	6,000	6,000	5,000	4,200	3,500	3,000	2,700	2,500	15"	30"	7 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 5/16"	3	7 to 12	3638T27	00000000	3638T42	000000	———	0
				F	8,000	8,000	8,000	8,000	7,000	5,700	4,800	4,100	3,600	3,100	15"	30"	7 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 9/16"	3	7 to 12	3638T24	00000000	3638T42	000000	———	0
				G	4,000	4,000	3,500	1,800	—	—	—	—	—	—	12 1/2"	30"	7 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 1/16"	2 1/2	4 to 6	3638T41	00000000	3638T42	000000	———	0


				Horizontally Telescoping, Vertically Adjustable (40° Maximum Lifting Angle)



						H	4,000	4,000	4,000	4,000	3,200	2,600	2,200	1,900	1,600	1,500	15"	30"	7 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 1/16"	3	7 to 12	3638T25	00000000	3638T42	000000	3638T43	0000000


						H	6,000	6,000	6,000	6,000	5,000	4,200	3,500	3,000	2,700	2,500	15"	30"	7 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 5/16"	3	7 to 12	3638T32	00000000	3638T42	000000	3638T43	000000
						H	8,000	8,000	8,000	8,000	7,000	5,700	4,800	4,100	3,600	3,100	15"	30"	7 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 9/16"	3	7 to 12	3638T33	00000000	3638T42	000000	3638T43	000000

Replacements for Forklift Booms

Replacement Safety-Pin Shackles

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.

	Thk.	Pin Dia.	Opening Wd.	Inside Lg.	Inside Wd.	Specs. Met		Each
Galvanized Steel



	4,400	1/2"	21/32"	13/16"	1 29/32"	1 5/16"	ASME B30.26, Fed. Spec. RR-C-271	3555T51	000000


	7,100	5/8"	25/32"	1 1/16"	2 13/32"	1 23/32"	ASME B30.26, Fed. Spec. RR-C-271	3555T52	00000
	10,400	3/4"	29/32"	1 1/4"	2 13/16"	2"	ASME B30.26, Fed. Spec. RR-C-271	3555T53	00000

Replacement Hooks with Swivel

Note: Capacities are for vertical lifting only.

	Hook		Eye
Wt. Cap., lb.	Opening Wd.	Usable Lg.	ID	Thk.	Specs. Met	For Use With		Each
4,400	1 1/16"	6 1/8"	1 3/4"	5/8"	ASME B30.10	Chain, Wire Rope	3525T613	0000000
6,600	1 3/16"	6 1/2"	1 3/4"	5/8"	ASME B30.10	Chain, Wire Rope	3525T614	000000
11,000	1 1/2"	7 1/2"	2"	3/4"	ASME B30.10	Chain, Wire Rope	3525T615	000000

Includes		Each
Latch, Spring, Nut and Bolt	35315T43	000000
Latch, Spring, Nut and Bolt	35315T45	00000
Latch, Spring, Nut and Bolt	35315T44	00000

Tool Support Arms


Bench Top	Floor Mount 36" Maximum Projection

Floor Mount 72" Maximum Projection	Wall Mount

Suspend tools to keep them out of the way but still within reach. Attaching brackets slide along the length of the arm.

Floor Mount and Wall Mount—Floor-mount and wall-mount arms include a trolley to support hose and cable.

						Base
	Max. Range of Motion	Max. Projection	Overall Ht.	Max. Load Cap., lb.	Material	Lg.	Wd.	Mount Type	No. of Mounting Holes	Mounting Hole Dia.	Mounting Fasteners Included	Attaching End Mount Type	Features		Each
In and Out, Rotate, Side to Side







				Bench Top

				180°	24"	48"	30	Steel	5 1/2"	3 1/2"	Screw On	4	0.422"	Yes	Eyebolt	—	6139T241	0000000




						Floor Mount

						160°	72"	108"	50	Powder-Coated Steel	6"	6"	Screw On	4	1/2"	No	Bracket	Hose/Cable Trolley	49385T32	00000000


						180°	36"	108"	30	Powder-Coated Steel	6"	5"	Screw On	4	1/2"	No	Bracket	Hose/Cable Trolley	49385T22	00000000




								Wall Mount

								180°	36"	—	30	Powder-Coated Steel	4 1/4"	1 1/2"	Screw On	2	3/8"	No	Bracket	Hose/Cable Trolley	49385T21	000000


								180°	72"	—	50	Powder-Coated Steel	10"	5"	Screw On	6	1/2"	No	Bracket	Hose/Cable Trolley	49385T31	00000000

Forklift Pallet Dumpers

Shift loads off pallets and into containers from the safety of your forklift. A long cable extends from the top of these dumpers to your seat—pull it to release a latch and tip the front of the dumper. A hook at the end of each arm keeps the pallet from sliding off. Once you’ve dumped the load, lower your forks to the ground to straighten the pallet and latch the dumper back together.

Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.

Warning: Never use to lift people or items over people.

		Fork Pockets			For Max. Fork		Fork		Overall
Usable Fork Lg.	Wt. Cap., lb.	No. of	Spacing Ctr.-to-Ctr.	For Min. Fork Lg.	Wd.	Ht.	Material	Color	Lg.	Wd.	Ht.	Forklift Attachment Type	Material	Color	Features		Each
52"	2,000	2	20 1/2"	32"	7 1/2"	2"	Powder-Coated Steel	Yellow	91"	32"	32 1/2"	Hook and Chain	Powder-Coated Steel	Blue	Pull Cable	8999N11	0000000

Dremel Rotary Tool Accessory Kits

Complete a wide range of cutting, grinding, and sanding tasks by pairing these accessories with your Dremel rotary tool.

Total No. of Pieces	For Mfr. Model No.	Includes		Each
110	100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200, 8220-1/28, 8250, 8260	19 Sanding Bands, 26 Cutoff Wheels, 30 Sanding Discs, Dressing Stone, Eight Felt Polishing Wheels, Four Grinding Bits, High Speed Cutter, Plastic Storage Case, Polishing Compound, Wrench	4344A19	000000

Battery-Powered Forklift Booms

No more manually tugging and shoving your boom into position—just push a button and the battery-powered hydraulic pump precisely extends and retracts these booms for you. For loads up to 2,000 lbs., you can even move these booms with your load suspended from them. For heavier loads, you’ll need to position them first and then attach your load, but it’s still faster and more precise than manual booms. Operate these booms from a safe distance using the pendant switch.

Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. A forklift with an 8,000 lb. rating is required. Check with the manufacturer of your forklift for load capabilities before using.

Warning: Never use to lift people or items over people.

Horizontally-Telescoping Boom

Pendant Switch on 8-ft. Cord

	Wt. Cap., lb.													For Max. Fork			Hook
	@ 3 ft.	@ 4 ft.	@ 5 ft.	@ 6 ft.	@ 7 ft.	@ 8 ft.	@ 9 ft.	@ 10 ft.	@ 11 ft.	@ 12 ft.	Cap. while Adjusting Lg., lb.	Fork Pocket Spacing Ctr.-to-Ctr.	For Min. Fork Lg.	Wd.	Ht.	Material	Type	Movement	Opening Wd.	First Hook Position, ft.	Lg., ft.	Batteries Included	Battery Charger Included		Each
Pendant Switch on 8-ft. Cord



		8,000	6,600	6,000	5,300	4,600	4,000	3,500	3,000	2,600	2,200	2,000	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching	Swivel	1", 1 1/4"	3	7 to 12	Yes	Yes	8749N11	000000000

Forklift Roll-Lifting Poles

Safely transport rolled and coiled items with a forklift. Also known as carpet rams, these poles have pockets that slide over forks and a hook and chain that secures to your forklift’s carriage. The tip is yellow for visibility. For easy storage, remove the pole from the base when not in use.

Make sure the items you move don’t exceed your forklift's capacity.

Warning: Never use to lift people or items over people.

Pole			Fork Pockets			For Max. Fork		Overall
Lg.	Dia.	Wt. Cap., lb.	No. of	Spacing Ctr.-to-Ctr.	For Min. Fork Lg.	Wd.	Ht.	Lg.	Wd.	Ht.	Forklift Attachment Type	Material	Color		Each
48"	2 3/4"	2,500	2	24"	30"	7 5/8"	2 5/8"	77 3/8"	34"	7 1/4"	Hook and Chain	Painted Steel	Blue	9367N112	0000000
108"	2 3/4"	2,500	2	24"	30"	7 5/8"	2 5/8"	137 3/8"	34"	7 1/4"	Hook and Chain	Painted Steel	Blue	9367N111	00000000

Compact Forklift Booms

Shown Installed on a Forklift

Horizontally Telescoping

Designed for moving loads in cramped warehouses, these booms collapse to a smaller size than standard booms. You can also extend them to carry long loads or place items in hard-to-reach spots. Slide your forks into the pockets and secure to your carriage with the included chain.

These booms are labeled with capacity for each hook position. First hook position is measured from the fork pocket end.

Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.

Warning: Never use to lift people or items over people.

	Wt. Cap., lb.												For Max. Fork			Hook
	@ 31 In.	@ 37 In.	@ 43 In.	@ 52 In.	@ 64 In.	@ 66 In.	@ 76 In.	@ 79 In.	@ 89 In.	@ 92 In.	Fork Pocket Spacing Ctr.-to-Ctr.	For Min. Fork Lg.	Wd.	Ht.	Material	Type	Movement	Opening Wd.	First Hook Position	Lg., ft.		Each
Horizontally Telescoping



		4,000	3,800	3,700	3,500	—	3,200	—	3,000	—	2,700	24"	24"	7 1/2"	2 1/2"	Painted Steel	Latching Grab	Swivel Rigid	1" 5/8"	31"	4 1/2 to 8	3638T119	000000000


		6,000	5,700	5,400	4,900	—	4,300	—	3,600	—	3,000	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching	Swivel	1"	31"	4 1/2 to 8	3638T121	00000000
		8,000	7,600	7,200	6,600	5,800	—	5,000	—	4,200	—	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching Latching	Swivel Swivel	1" 1 1/4"	31"	4 1/2 to 7 1/2	3638T122	00000000

Replacements for Forklift Booms

Replacement Safety-Pin Shackles

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.

	Thk.	Pin Dia.	Opening Wd.	Inside Lg.	Inside Wd.	Specs. Met		Each
Galvanized Steel



	4,400	1/2"	21/32"	13/16"	1 29/32"	1 5/16"	ASME B30.26, Fed. Spec. RR-C-271	3555T51	000000


	7,100	5/8"	25/32"	1 1/16"	2 13/32"	1 23/32"	ASME B30.26, Fed. Spec. RR-C-271	3555T52	00000
	10,400	3/4"	29/32"	1 1/4"	2 13/16"	2"	ASME B30.26, Fed. Spec. RR-C-271	3555T53	00000

Replacement Hooks with Swivel

Note: Capacities are for vertical lifting only.

	Hook		Eye
Wt. Cap., lb.	Opening Wd.	Usable Lg.	ID	Thk.	Specs. Met	For Use With		Each
4,400	1 1/16"	6 1/8"	1 3/4"	5/8"	ASME B30.10	Chain, Wire Rope	3525T613	0000000
6,600	1 3/16"	6 1/2"	1 3/4"	5/8"	ASME B30.10	Chain, Wire Rope	3525T614	000000
11,000	1 1/2"	7 1/2"	2"	3/4"	ASME B30.10	Chain, Wire Rope	3525T615	000000

Dremel Rotary Tool Arbors


	Slotted-Head-Screw Locking Mechanism

Attach cutoff wheels to a Dremel grinder. Arbors are also known as mandrels.

		For Max. Wheel
	For Arbor Hole Thread Size	Thk.	Arbor Hole Dia.	Shank Dia.	Head Dia.	Overall Lg.	Locking Mechanism	Max. Rotation Speed, rpm	For Mfr. Model No.		Each
Steel



		1-64	0.045"	0.075"	1/8"	3/16"	1 3/8"	Slotted-Head Screw	35,000	100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200	4344A84	00000

Dremel Rotary Tool Drill Press Attachments

Turn Dremel rotary tools into miniature drill presses. These attachments tilt up to 90 degrees in either direction—in 15-degree increments—for drilling holes at an angle. You can also use them to position tools horizontally, so you can hold workpieces with both hands while polishing and sanding.

For Mfr. Model No.		Each
100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200, 8240, 8250, 8260	4344A712	000000

Dremel Rotary Tool Grinding Bits

Style

Pair with Dremel rotary tools to sharpen, debur, and grind metal surfaces.

Style	Shape	Head Dia.	Shaft Dia.	For Mfr. Model No.	Pkg. Qty.		Pkg.
2	Cone	3/8"	1/8"	100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200	5	4344A86	000000

Dremel Rotary Tool Hangers

Screw these hangers onto your workbench.

Ht. Range	For Mfr. Model No.	Includes		Each
26" to 41"	100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8200	Fasteners	4344A71	000000

Dremel Rotary Tool Motor Brushes

Replace the brush on your Dremel rotary tool.

For Mfr. Model No.		Each
100-N/7, 3000-1/24	4344A32	00000

Dremel Rotary Tool Routers

Convert your rotary tool into a plunge router to route circles, route freehand, and cut decorative edges, straight slots, and inlay work.

For Mfr. Model No.		Each
100, 100-N/7, 200, 3000, 3000-1/24, 4000, 4000-2/30, 8220, 8240, 8250, 8260	4344A91	000000

Dremel Rotary Tool Sanding Sleeves

Image of Product. Front orientation. Rotary Tool Sanding Sleeves.

Pair with Dremel rotary tools to shape and smooth wood, fiberglass, and rubber surfaces. These sleeves also remove rust from metal.

Dia.	Grit	For Mfr. Model No.	Pkg. Qty.		Pkg.
1/2"	60	100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200, 8250, 8260	6	4344A714	00000

Dremel Rotary Tool Wheel Brushes

Pair with Dremel rotary tools to polish, deburr, and remove rust from metal surfaces such as tools, machine parts, and electrical contacts.

Dia.	Shaft Dia.	For Mfr. Model No.	Pkg. Qty.		Pkg.
3/4"	1/8"	100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200, 8250, 8260	2	4344A85	00000

Rotary Tool Collet Sets for Dremel Bit and Bur Grinders

Pair with Dremel rotary tools to securely grip bits and burs.

Mfr.	Mfr. Model No.	For Mfr. Model No.	No. of Pieces	Includes		Each
Bosch	4485	100, 200, 285, 3000, 4000, 4300, 7700, 8200	5	1/32" Collet; 1/16" Collet; 3/32" Collet; 1/8" Collet; Collet Nut	4344A715	000000

Rotary Tool Engraving Bit Kits for Dremel Grinders

For engraving and carving, these kits contain a variety of Dremel-compatible bits.

	For Mfr. Model No.	Includes		Each
1/8" Diameter Shank



	11	100, 100-N/7, 200, 3000, 3000-1/24, 7760-N/10, 8220, 8220-1/28, 8240, 8250, 8260	Four Engraving Cutters, Seven Grinding Bits, Plastic Storage Case	4757N11	000000

Sanding Sleeve Drums for Dremel Handheld Power Tools

This drum is required to use a sanding sleeve with a Dremel grinder. Slide a sleeve on the drum and tighten the screw to expand the drum to securely hold the sleeve. Install the shank into the grinder’s collet.

	Drum
	Dia.	Lg.	Shank Dia.	Drum Material	Max. Rotation Speed, rpm	Includes	For Mfr. Model No.		Each
For Dremel



		1/2"	1/2"	1/8"	Rubber	5,000	One 60 Grit Sanding Sleeve	100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200	4344A83	00000

Dremel Rotary Tool Cutting Bits


Ball	Flame

Pair with Dremel rotary tools to cut holes, slots, and shapes in workpieces. These bits are good for use on a variety of materials including wood and plastic.

Ball—Ball cutters can also be used on soft metals.

Flame—Flame cutters can also be used on rubber and foam.

Shape	Head Dia.	Shaft Dia.	For Mfr. Model No.	Pkg. Qty.		Pkg.
Ball	1/32"	1/8"	100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200, 8250, 8260	2	4344A36	00000
Ball	1/16"	1/8"	100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200, 8250, 8260	2	4344A37	0000
Flame	3/8"	1/8"	100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200, 8250, 8260	1	4344A31	00000