Lifting Shackles | McMaster-Carr

Filter by

Application

Pin Diameter

Weight Capacity

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. to 99,999 lb.

100,000 lb. or greater

Opening Width

Pin Type

Material

Thickness

Finish

Inside Length

Inside Width

Safety Factor

Attachment Type

Pin Material

Straight-Link Chain Trade Size

Specifications Met

Color

For Web Width

RoHS

REACH

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

For Use With

Chain

Webbing

Applied Load Direction

Shackle Type

Performance

Heavy Vibration Resistant

Body Thickness

191 Products

Shackle Type

Anchor

Handle vertical and side loads without warping

102 products

D-Type

The best choice for lifting and towing with chain

58 products

Shackle Type

Flat

Keep web slings from folding or bunching

17 products

Flexible

Wrap around a variety of lifting or anchor points

8 products

Anchor Shackles for Lifting

Screw Pin

Safety Cotter Pin

Flush

Hammer-Set-Dowel

Your go-to choice for connecting hooks, slings, and other rigging and lifting equipment. The rounded body on these shackles supports vertical or side loads without fatiguing or warping the shape. They meet ASME specifications for rigging and lifting, so they can hoist everything from steel beams to bulldozers. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as bow shackles.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, the pin won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.

Flush Hammer-Set-Dowel Pin—Hammer in two dowel pins to hold the pin in place. These shackles stay put even under heavy, shifting loads and in long-term rigging setups. They also won't snag on clothing or other nearby material.

Black-Oxide Steel—The dark finish on these shackles resists occasional moisture.

Galvanized Steel—A thick coating protects these shackles in wet and outdoor environments better than black-oxide steel. However, they corrode when exposed to salt water and chemicals.

High-Strength Galvanized Alloy Steel—Stronger than galvanized steel with corrosion resistance in wet and outdoor environments.

High-Strength Powder-Coated Alloy Steel—The powder-coating won't chip off as easily as paint. These shackles combine the strength of alloy steel with corrosion resistance in wet and outdoor environments.

Super-Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Thk.	Opening Wd.	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met		Each
Screw Pin





				Black-Oxide Steel
				3/16"	3/8"	1/4"	7/8"	9/16"	665	ASME B30.26, Fed. Spec. RR-C-271	8494T11	00000
				1/4"	15/32"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26, Fed. Spec. RR-C-271	8494T12	0000
				5/16"	17/32"	3/8"	1 1/4"	15/16"	1,500	ASME B30.26, Fed. Spec. RR-C-271	8494T13	0000
				3/8"	21/32"	7/16"	1 7/16"	1 1/8"	2,000	ASME B30.26, Fed. Spec. RR-C-271	8494T14	0000
				7/16"	23/32"	1/2"	1 11/16"	1 5/16"	3,000	ASME B30.26, Fed. Spec. RR-C-271	8494T15	00000
				1/2"	13/16"	5/8"	1 15/16"	1 1/2"	4,000	ASME B30.26, Fed. Spec. RR-C-271	8494T16	00000
				5/8"	1 1/16"	3/4"	2 1/2"	1 7/8"	6,500	ASME B30.26, Fed. Spec. RR-C-271	8494T17	00000
				3/4"	1 1/4"	7/8"	3"	2"	9,500	ASME B30.26, Fed. Spec. RR-C-271	8494T18	00000
				7/8"	1 7/16"	1"	3 1/4"	2 5/8"	13,000	ASME B30.26, Fed. Spec. RR-C-271	8494T19	00000
				1"	1 11/16"	1 1/8"	3 3/4"	2 3/4"	17,000	ASME B30.26, Fed. Spec. RR-C-271	8494T21	00000



						Galvanized Steel
						3/16"	13/32"	1/4"	29/32"	19/32"	600	ASME B30.26	3558T44	0000
						1/4"	1/2"	5/16"	1 5/32"	25/32"	1,100	ASME B30.26, Fed. Spec. RR-C-271	3558T45	0000
						5/16"	17/32"	13/32"	1 1/4"	13/16"	1,500	ASME B30.26	3558T46	00000
						3/8"	11/16"	7/16"	1 15/32"	1 1/32"	2,200	ASME B30.26, Fed. Spec. RR-C-271	3558T47	00000
						7/16"	3/4"	1/2"	1 23/32"	1 3/16"	3,300	ASME B30.26, Fed. Spec. RR-C-271	3558T48	00000
						1/2"	13/16"	5/8"	1 29/32"	1 5/16"	4,400	ASME B30.26, Fed. Spec. RR-C-271	3558T49	00000
						5/8"	1 1/16"	3/4"	2 13/32"	1 23/32"	7,100	ASME B30.26, Fed. Spec. RR-C-271	3558T51	00000
						3/4"	1 1/4"	7/8"	2 13/16"	2"	10,400	ASME B30.26, Fed. Spec. RR-C-271	3558T52	00000
						7/8"	1 15/32"	1"	3 5/16"	2 9/32"	14,300	ASME B30.26, Fed. Spec. RR-C-271	3558T53	00000
						1"	1 11/16"	1 1/8"	3 3/4"	2 11/16"	18,700	ASME B30.26, Fed. Spec. RR-C-271	3558T54	00000
						1 1/8"	1 13/16"	1 1/4"	4 1/4"	2 15/16"	20,900	ASME B30.26, Fed. Spec. RR-C-271	3558T55	000000
						1 1/4"	2 1/32"	1 3/8"	4 23/32"	3 1/4"	26,400	ASME B30.26, Fed. Spec. RR-C-271	3558T56	000000
						1 3/8"	2 1/4"	1 17/32"	5 7/32"	3 5/8"	29,700	ASME B30.26, Fed. Spec. RR-C-271	3558T57	000000
						1 1/2"	2 7/16"	1 21/32"	5 21/32"	3 1/2"	34,000	ASME B30.26	3558T58	000000
						1 3/4"	2 31/32"	2"	7"	4 3/4"	50,000	ASME B30.26	3558T59	000000
						2"	3 9/32"	2 1/4"	7 15/32"	5 1/2"	70,000	ASME B30.26	3558T61	000000
						2 1/2"	4 1/8"	2 3/4"	10 1/2"	7 1/4"	110,000	ASME B30.26, Fed. Spec. RR-C-271	3558T62	00000000



								High-Strength Galvanized Alloy Steel
								3/8"	11/16"	15/32"	1 13/32"	1"	4,000	ASME B30.26	3663T51	00000
								7/16"	23/32"	1/2"	1 11/16"	1 3/16"	5,200	ASME B30.26	3663T53	00000
								1/2"	27/32"	21/32"	1 31/32"	1 13/32"	6,600	ASME B30.26	3663T42	00000
								5/8"	1 1/16"	3/4"	2 7/16"	1 21/32"	10,000	ASME B30.26	3663T43	00000
								3/4"	1 9/32"	29/32"	2 27/32"	1 29/32"	14,000	ASME B30.26	3663T44	00000
								7/8"	1 15/32"	1"	3 5/16"	2 1/16"	19,000	ASME B30.26	3663T45	00000
								1"	1 3/4"	1 5/32"	3 3/4"	2 17/32"	25,000	ASME B30.26	3663T46	00000
								1 1/8"	1 27/32"	1 1/4"	4 1/32"	2 11/16"	30,000	ASME B30.26	3663T54	000000
								1 1/4"	2 1/32"	1 13/32"	4 21/32"	2 29/32"	36,000	ASME B30.26	3663T47	000000
								1 1/2"	2 7/16"	1 21/32"	5 21/32"	3 1/2"	50,000	ASME B30.26	3663T48	000000
								1 5/8"	2 21/32"	1 3/4"	6 1/8"	4 1/8"	58,000	ASME B30.26	3663T55	000000
								1 3/4"	2 31/32"	2"	7"	4 3/4"	68,000	ASME B30.26	3663T52	000000
								2"	3 9/32"	2 1/4"	7 15/32"	5 1/2"	86,000	ASME B30.26	3663T49	000000



										Super-Corrosion-Resistant 316 Stainless Steel
										3/16"	13/32"	1/4"	27/32"	19/32"	650	ASME B30.26, Fed. Spec. RR-C-271	3583T21	0000
										1/4"	1/2"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26, Fed. Spec. RR-C-271	3583T11	0000
										5/16"	17/32"	3/8"	1 7/32"	13/16"	1,300	ASME B30.26, Fed. Spec. RR-C-271	3583T12	00000
										3/8"	11/16"	7/16"	1 7/16"	31/32"	1,500	ASME B30.26, Fed. Spec. RR-C-271	3583T13	00000
										7/16"	3/4"	1/2"	1 25/32"	1 1/16"	2,000	ASME B30.26, Fed. Spec. RR-C-271	3583T14	00000
										1/2"	27/32"	5/8"	1 27/32"	1 7/32"	3,000	ASME B30.26, Fed. Spec. RR-C-271	3583T15	00000
5/8"										1 1/32"	3/4"	2 7/16"	1 1/2"	4,000	ASME B30.26, Fed. Spec. RR-C-271	3583T16	00000
3/4"	1 1/4"									7/8"	2 27/32"	1 29/32"	6,000	ASME B30.26, Fed. Spec. RR-C-271	3583T17	00000
7/8"	1 1/2"									1"	3 5/16"	2 7/32"	8,000	ASME B30.26, Fed. Spec. RR-C-271	3583T18	000000
1"	1 23/32"	1 1/8"								3 13/16"	2 5/16"	10,000	ASME B30.26, Fed. Spec. RR-C-271	3583T19	000000
1 1/4"	2 1/32"	1 3/8"	4 11/16"							3 5/16"	14,000	ASME B30.26, Fed. Spec. RR-C-271	3583T22	000000

Safety Cotter Pin





										Black-Oxide Steel
										1/4"	15/32"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26, Fed. Spec. RR-C-271	8494T26	00000
										5/16"	17/32"	3/8"	1 1/4"	15/16"	1,500	ASME B30.26, Fed. Spec. RR-C-271	8494T27	00000
										3/8"	21/32"	7/16"	1 7/16"	1 1/8"	2,000	ASME B30.26, Fed. Spec. RR-C-271	8494T28	00000
										7/16"	23/32"	1/2"	1 11/16"	1 5/16"	3,000	ASME B30.26, Fed. Spec. RR-C-271	8494T29	00000
										1/2"	13/16"	5/8"	1 15/16"	1 1/2"	4,000	ASME B30.26, Fed. Spec. RR-C-271	8494T31	00000
				5/8"						1 1/16"	3/4"	2 1/2"	1 7/8"	6,500	ASME B30.26, Fed. Spec. RR-C-271	8494T32	00000
				3/4"	1 1/4"					7/8"	3"	2"	9,500	ASME B30.26, Fed. Spec. RR-C-271	8494T33	00000
				7/8"	1 7/16"					1"	3 1/4"	2 5/8"	13,000	ASME B30.26, Fed. Spec. RR-C-271	8494T34	00000
				1"	1 11/16"					1 1/8"	3 3/4"	2 3/4"	17,000	ASME B30.26, Fed. Spec. RR-C-271	8494T35	000000



										Galvanized Steel
										3/16"	3/8"	1/4"	29/32"	5/8"	700	ASME B30.26, Fed. Spec. RR-C-271	3555T45	00000
										1/4"	1/2"	5/16"	1 5/32"	25/32"	1,100	ASME B30.26, Fed. Spec. RR-C-271	3555T46	00000
										5/16"	17/32"	13/32"	1 1/4"	27/32"	1,600	ASME B30.26, Fed. Spec. RR-C-271	3555T47	00000
										3/8"	11/16"	15/32"	1 15/32"	1 1/32"	2,200	ASME B30.26, Fed. Spec. RR-C-271	3555T48	00000
										7/16"	3/4"	1/2"	1 23/32"	1 3/16"	3,300	ASME B30.26, Fed. Spec. RR-C-271	3555T49	00000
										1/2"	13/16"	21/32"	1 29/32"	1 5/16"	4,400	ASME B30.26, Fed. Spec. RR-C-271	3555T51	00000
										5/8"	1 1/16"	25/32"	2 13/32"	1 23/32"	7,100	ASME B30.26, Fed. Spec. RR-C-271	3555T52	00000
										3/4"	1 1/4"	29/32"	2 13/16"	2"	10,400	ASME B30.26, Fed. Spec. RR-C-271	3555T53	00000
										7/8"	1 15/32"	1 1/32"	3 5/16"	2 9/32"	14,300	ASME B30.26, Fed. Spec. RR-C-271	3555T54	000000
										1"	1 23/32"	1 5/32"	3 3/4"	2 23/32"	18,700	ASME B30.26, Fed. Spec. RR-C-271	3555T55	000000
										1 1/8"	1 13/16"	1 1/4"	4 1/4"	2 15/16"	20,900	ASME B30.26, Fed. Spec. RR-C-271	3555T56	000000
										1 1/4"	2 1/32"	1 13/32"	4 21/32"	2 29/32"	24,000	ASME B30.26	3555T57	000000
										1 3/8"	2 1/4"	1 1/2"	5 7/32"	3 1/4"	27,000	ASME B30.26	3555T78	000000
						1 1/2"				2 7/16"	1 21/32"	5 21/32"	3 1/2"	34,000	ASME B30.26	3555T59	000000
						1 3/4"	2 31/32"			2"	7"	4 3/4"	50,000	ASME B30.26	3555T61	000000
						2"	3 9/32"			2 1/4"	7 15/32"	5 1/2"	70,000	ASME B30.26	3555T62	000000



										High-Strength Galvanized Alloy Steel
										1/2"	27/32"	21/32"	1 31/32"	1 13/32"	6,600	ASME B30.26	8966T51	00000
										5/8"	1 1/16"	3/4"	2 7/16"	1 21/32"	10,000	ASME B30.26	8966T52	00000
										3/4"	1 9/32"	29/32"	2 27/32"	1 29/32"	14,000	ASME B30.26	8966T53	000000
										7/8"	1 15/32"	1"	3 5/16"	2 1/16"	19,000	ASME B30.26	8966T54	000000
										1"	1 3/4"	1 5/32"	3 3/4"	2 17/32"	25,000	ASME B30.26	8966T55	000000
										1 1/4"	2 1/32"	1 13/32"	4 21/32"	2 29/32"	36,000	ASME B30.26	8966T76	000000
										1 1/2"	2 7/16"	1 21/32"	5 21/32"	3 1/2"	60,000	ASME B30.26	8966T57	000000
										1 5/8"	2 21/32"	1 3/4"	6 1/8"	4 1/8"	70,000	ASME B30.26	8966T21	000000
										1 3/4"	2 31/32"	2"	7"	4 3/4"	80,000	ASME B30.26	8966T12	000000
										2"	3 9/32"	2 1/4"	7 15/32"	5 1/2"	100,000	ASME B30.26	8966T14	00000000



										Super-Corrosion-Resistant 316 Stainless Steel
										1/4"	1/2"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26, Fed. Spec. RR-C-271	3860T21	00000
										5/16"	17/32"	3/8"	1 7/32"	13/16"	1,300	ASME B30.26, Fed. Spec. RR-C-271	3860T22	00000
										3/8"	11/16"	7/16"	1 7/16"	31/32"	1,500	ASME B30.26, Fed. Spec. RR-C-271	3860T23	00000
										7/16"	3/4"	1/2"	1 25/32"	1 1/16"	2,000	ASME B30.26, Fed. Spec. RR-C-271	3860T24	00000
										1/2"	27/32"	5/8"	1 27/32"	1 7/32"	3,000	ASME B30.26, Fed. Spec. RR-C-271	3860T25	00000
										5/8"	1 1/32"	3/4"	2 7/16"	1 1/2"	4,000	ASME B30.26, Fed. Spec. RR-C-271	3860T26	00000
										3/4"	1 1/4"	7/8"	2 27/32"	1 3/4"	6,000	ASME B30.26, Fed. Spec. RR-C-271	3860T27	000000
										7/8"	1 1/2"	1"	3 5/16"	2"	8,000	ASME B30.26, Fed. Spec. RR-C-271	3860T28	000000
										1"	1 23/32"	1 1/8"	3 13/16"	2 5/16"	10,000	ASME B30.26, Fed. Spec. RR-C-271	3860T29	000000
										1 1/4"	2 1/32"	1 3/8"	4 11/16"	3 5/16"	14,000	ASME B30.26, Fed. Spec. RR-C-271	3860T31	000000

Flush Hammer-Set-Dowel Pin





										High-Strength Powder-Coated Alloy Steel
										7/16"	7/8"	9/16"	1 13/16"	1 3/32"	7,100	ASME B30.26	3812T22	00000
										9/16"	1 3/32"	3/4"	2 9/16"	1 11/32"	12,000	ASME B30.26	3812T23	00000
										11/16"	1 11/32"	15/16"	3"	1 5/8"	18,100	ASME B30.26	3812T24	00000
										13/16"	1 19/32"	1 7/32"	3 13/32"	1 15/16"	28,300	ASME B30.26	3812T31	000000
										1 1/16"	2"	1 7/32"	4 1/4"	2 11/16"	35,900	ASME B30.26	3812T33	000000
										1 5/16"	1 27/32"	1 7/16"	4 3/8"	1 27/32"	34,200	ASME B30.26	3812T32	000000

D-Type Shackles for Lifting

The best choice for lifting with chain. The bow and pin are equally wide to keep chain links from sliding or moving and support heavier vertical loads than anchor shackles. However, they're rated for vertical lifting only, as side loading might deform the bow. All meet ASME specifications for use with rigging and lifting equipment. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as chain shackles.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Galvanized Steel—A thick coating protects these shackles in wet and outdoor environments better than black-oxide steel. However, they corrode when exposed to salt water and chemicals.

High-Strength Galvanized Alloy Steel—Stronger than galvanized steel with corrosion resistance in wet and outdoor environments.

Super-Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Thk.	Opening Wd.	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met		Each
Screw Pin





				Galvanized Steel
				1/4"	1/2"	5/16"	29/32"	1/2"	1,500	ASME B30.26	3560T31	000000
				5/16"	9/16"	13/32"	1 1/32"	9/16"	2,000	ASME B30.26	3560T32	00000
				3/8"	11/16"	15/32"	1 1/4"	11/16"	3,000	ASME B30.26	3560T33	00000
				7/16"	3/4"	1/2"	1 1/2"	3/4"	3,300	ASME B30.26, Fed. Spec. RR-C-271	3560T47	00000
				1/2"	13/16"	21/32"	1 11/16"	13/16"	4,400	ASME B30.26, Fed. Spec. RR-C-271	3560T48	00000
				5/8"	1 1/16"	3/4"	2 1/16"	1 1/16"	7,100	ASME B30.26, Fed. Spec. RR-C-271	3560T49	00000
				3/4"	1 1/4"	29/32"	2 13/32"	1 1/4"	10,400	ASME B30.26, Fed. Spec. RR-C-271	3560T51	00000
				7/8"	1 15/32"	1"	2 7/8"	1 7/16"	14,300	ASME B30.26, Fed. Spec. RR-C-271	3560T52	00000
				1"	1 23/32"	1 5/32"	3 1/4"	1 11/16"	18,700	ASME B30.26, Fed. Spec. RR-C-271	3560T53	000000
				1 1/8"	1 13/16"	1 1/4"	3 9/16"	1 13/16"	24,000	ASME B30.26	3560T34	000000
				1 1/4"	2 1/32"	1 13/32"	4"	2"	26,400	ASME B30.26, Fed. Spec. RR-C-271	3560T55	000000
				1 3/8"	2 1/4"	1 1/2"	4 15/32"	2 1/4"	34,000	ASME B30.26	3560T87	000000
				1 1/2"	2 13/32"	1 21/32"	4 29/32"	2 13/32"	40,000	ASME B30.26	3560T35	000000
				1 3/4"	2 29/32"	2"	5 3/4"	2 29/32"	60,000	ASME B30.26	3560T36	000000
				2"	3 9/32"	2 1/4"	6 3/4"	3 9/32"	70,000	ASME B30.26	3560T59	000000



						Super-Corrosion-Resistant 316 Stainless Steel
						1/4"	15/32"	5/16"	7/8"	15/32"	1,000	ASME B30.26, Fed. Spec. RR-C-271	35895T111	0000
						5/16"	17/32"	13/32"	1 1/32"	17/32"	1,300	ASME B30.26, Fed. Spec. RR-C-271	35895T112	0000
						3/8"	21/32"	15/32"	1 1/4"	21/32"	1,500	ASME B30.26, Fed. Spec. RR-C-271	35895T113	00000
						7/16"	3/4"	1/2"	1 7/16"	3/4"	2,000	ASME B30.26, Fed. Spec. RR-C-271	35895T119	00000
						1/2"	13/16"	21/32"	1 19/32"	13/16"	3,000	ASME B30.26, Fed. Spec. RR-C-271	35895T114	00000
						5/8"	1 1/16"	3/4"	1 31/32"	1 1/16"	4,000	ASME B30.26, Fed. Spec. RR-C-271	35895T115	00000
						3/4"	1 7/32"	29/32"	2 13/32"	1 7/32"	6,000	ASME B30.26, Fed. Spec. RR-C-271	35895T116	00000
						7/8"	1 15/32"	1"	2 29/32"	1 15/32"	8,000	ASME B30.26, Fed. Spec. RR-C-271	35895T117	000000
						1"	1 11/16"	1 5/32"	3 7/32"	1 11/16"	10,000	ASME B30.26, Fed. Spec. RR-C-271	35895T118	000000

						Safety Cotter Pin





										Galvanized Steel
										1/4"	1/2"	5/16"	15/16"	7/16"	1,100	ASME B30.26, Fed. Spec. RR-C-271	3556T26	00000
										5/16"	17/32"	13/32"	1 3/32"	1/2"	1,600	ASME B30.26, Fed. Spec. RR-C-271	3556T27	00000
										3/8"	11/16"	15/32"	1 9/32"	5/8"	2,200	ASME B30.26, Fed. Spec. RR-C-271	3556T28	00000
										7/16"	3/4"	1/2"	1 1/2"	3/4"	3,300	ASME B30.26, Fed. Spec. RR-C-271	3556T29	00000
										1/2"	13/16"	21/32"	1 11/16"	13/16"	4,400	ASME B30.26, Fed. Spec. RR-C-271	3556T14	00000
										5/8"	1 1/16"	25/32"	2 1/16"	1 1/16"	7,100	ASME B30.26, Fed. Spec. RR-C-271	3556T15	00000
										3/4"	1 1/4"	29/32"	2 13/32"	1 1/4"	10,400	ASME B30.26, Fed. Spec. RR-C-271	3556T16	00000
										7/8"	1 15/32"	1 1/32"	2 7/8"	1 7/16"	14,300	ASME B30.26, Fed. Spec. RR-C-271	3556T17	000000
										1"	1 23/32"	1 5/32"	3 1/4"	1 11/16"	18,700	ASME B30.26, Fed. Spec. RR-C-271	3556T18	000000



												High-Strength Galvanized Alloy Steel
												1/4"	15/32"	5/16"	7/8"	15/32"	1,500	ASME B30.26	3556T38	00000
												5/16"	17/32"	13/32"	1"	17/32"	2,000	ASME B30.26	3556T39	00000
												3/8"	21/32"	15/32"	1 1/4"	21/32"	3,000	ASME B30.26	3556T41	00000
												1/2"	13/16"	21/32"	1 11/16"	13/16"	6,000	ASME B30.26	3556T42	00000
												5/8"	1 1/16"	3/4"	2"	1 1/16"	9,000	ASME B30.26	3556T43	00000
												3/4"	1 1/4"	29/32"	2 3/8"	1 1/4"	13,000	ASME B30.26	3556T44	00000
												7/8"	1 7/16"	1"	2 7/8"	1 7/16"	17,000	ASME B30.26	3556T45	000000
												1 1/8"	1 13/16"	1 1/4"	3 9/16"	1 13/16"	24,000	ASME B30.26	3556T33	000000
												1 1/4"	2 1/32"	1 13/32"	3 31/32"	2 1/32"	28,000	ASME B30.26	3556T34	000000
1 3/8"												2 1/4"	1 1/2"	4 15/32"	2 1/4"	34,000	ASME B30.26	3556T35	000000
1 1/2"	2 13/32"											1 21/32"	4 29/32"	2 13/32"	40,000	ASME B30.26	3556T36	000000
1 3/4"	2 29/32"											2"	5 3/4"	2 29/32"	60,000	ASME B30.26	3556T37	000000
2"	3 9/32"	2 1/4"										6 3/4"	3 9/32"	70,000	ASME B30.26	3556T25	00000000



		Super-Corrosion-Resistant 316 Stainless Steel
		3/8"	21/32"									15/32"	1 1/4"	21/32"	1,500	ASME B30.26, Fed. Spec. RR-C-271	35895T123	00000
		1/2"	13/16"									21/32"	1 19/32"	13/16"	3,000	ASME B30.26, Fed. Spec. RR-C-271	35895T124	00000
		5/8"	1 1/16"									3/4"	1 31/32"	1 1/16"	4,000	ASME B30.26, Fed. Spec. RR-C-271	35895T125	00000
		3/4"	1 7/32"									29/32"	2 13/32"	1 7/32"	6,000	ASME B30.26, Fed. Spec. RR-C-271	35895T126	000000
		7/8"	1 15/32"									1"	2 29/32"	1 15/32"	8,000	ASME B30.26, Fed. Spec. RR-C-271	35895T127	000000
		1"	1 11/16"									1 5/32"	3 7/32"	1 11/16"	10,000	ASME B30.26, Fed. Spec. RR-C-271	35895T128	000000

Flat Shackles for Lifting

Screw Pin

Safety Cotter Pin

Lift with web slings. The wide, flat bow on these shackles prevents your sling from folding or bunching to keep loads distributed equally. All meet ASME specifications for rigging and lifting equipment. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as webbing shackles. Optional spools fit on the pin to center attachments and keep rope from sliding across the pin.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

High-Strength Painted Alloy Steel—The paint provides some corrosion resistance, but can chip or wear away over time.

High-Strength Galvanized Alloy Steel—Stronger than galvanized steel with corrosion resistance in wet and outdoor environments.

	Shackles										Optional Spools
	For Web Wd.	Thk.	Opening Wd.	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met		Each		Each
Screw Pin





				High-Strength Painted Alloy Steel
				1"	3/4"	29/32"	3/4"	1 1/2"	1 13/32"	6,500	ASME B30.26	35505T1	000000	35505T92	000000
				1 1/2"	1"	1 1/4"	29/32"	1 29/32"	1 3/4"	13,000	ASME B30.26	35505T2	00000	35505T93	00000
				2"	1 1/8"	1 13/32"	1"	2 13/16"	2 1/4"	17,500	ASME B30.26	35505T3	00000	35505T94	00000
				3"	1 3/8"	1 5/8"	1 1/4"	3 1/16"	3 1/4"	25,000	ASME B30.26	35505T4	000000	35505T95	00000
				4"	1 3/4"	2 1/8"	1 1/2"	5 1/4"	4 1/2"	41,000	ASME B30.26	35505T5	000000	35505T96	00000
				5"	2 1/4"	2 1/2"	2"	6 11/32"	5 1/2"	70,000	ASME B30.26	35505T6	000000	35505T97	00000
				6"	2 3/4"	3"	2 1/4"	7 23/32"	6 1/2"	100,000	ASME B30.26	35505T7	00000000	35505T98	000000

				Safety Cotter Pin





								High-Strength Painted Alloy Steel
								1"	9/16"	1 1/16"	3/4"	1 1/2"	1 13/32"	6,500	ASME B30.26	35505T84	00000	35505T92	00000
								1 1/2"	3/4"	1 1/4"	29/32"	1 29/32"	1 3/4"	13,000	ASME B30.26	35505T85	00000	35505T93	00000
								2"	7/8"	1 13/32"	1"	2 13/16"	2 1/4"	17,500	ASME B30.26	35505T86	000000	35505T94	00000
								3"	1 5/16"	1 5/8"	1 1/4"	3 1/16"	3 1/4"	25,000	ASME B30.26	35505T87	000000	35505T95	00000
								4"	1 3/8"	2 1/8"	1 1/2"	5 1/4"	4 1/2"	41,000	ASME B30.26	35505T88	000000	35505T96	00000
								5"	1 3/4"	2 1/2"	2"	6 11/32"	5 1/2"	70,000	ASME B30.26	35505T89	000000	35505T97	00000



										High-Strength Galvanized Alloy Steel
										2"	11/16"	1 1/4"	29/32"	3 17/32"	2 1/2"	15,400	ASME B30.26	4043N11	000000	———	0
										3"	15/16"	1 11/16"	1 5/32"	4 5/8"	3 1/4"	27,500	ASME B30.26	4043N12	000000	———	0
										3 1/2"	1 7/32"	2 1/32"	1 13/32"	5 13/16"	4"	39,600	ASME B30.26	4043N13	000000	———	0

Dual-Connect Shackles for Lifting

Flush

Hammer-Set-Dowel

Flush

Hammer-Set-Dowel

Pin/Safety Cotter

Attach chain to pins on both ends of these shackles—no extra hardware needed. Connect them to two lengths of chain or use them as a stable, inline connection in a lifting system. All meet ASME specifications for use with rigging and lifting equipment.

Note: Capacity limits are based on loads applied in line with a straight length of rope or chain. Test all assemblies for required strength before use.

Hammer-Set-Dowel Pin—Hammer in two dowel pins to hold the pin in place. These shackles stay put even under heavy, shifting loads and in long-term rigging setups. They also won't snag on clothing or other nearby material.

Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, they won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.

	Top Opening			Bottom Opening
	Opening Wd.	Pin Dia.	Inside Lg.	Opening Wd.	Pin Dia.	Inside Lg,	Wt. Cap., lb.	Specs. Met		Each
Flush Hammer-Set-Dowel Pin





				High-Strength Powder-Coated Alloy Steel
				15/32"	15/32"	1/2"	27/32"	5/8"	1 7/16"	7,100	ASME B30.26	3532T11	0000000
				5/8"	5/8"	19/32"	1 3/32"	25/32"	1 15/16"	12,000	ASME B30.26	3532T12	000000
				11/16"	3/4"	27/32"	1 5/16"	15/16"	2 7/32"	18,100	ASME B30.26	3532T13	000000

				Flush Hammer-Set-Dowel Pin/Safety Cotter Pin





								High-Strength Powder-Coated Alloy Steel
								15/32"	15/32"	1/2"	27/32"	5/8"	1 7/16"	7,100	ASME B30.26	3532T26	000000
								5/8"	5/8"	19/32"	1 3/32"	25/32"	1 15/16"	12,000	ASME B30.26	3532T27	000000
								11/16"	3/4"	27/32"	1 5/16"	15/16"	2 7/32"	18,100	ASME B30.26	3532T28	000000

Flexible Shackles for Lifting

A flexible and lightweight option for lifting. Made of polyethylene rope with a nylon cover, these shackles wrap around a variety of lifting points without marring surfaces. All meet ASME specifications for rigging and lifting equipment. To close them, pull the bar through the loop and slide the rubber lock over each end of the bar. Keep these shackles away from sharp edges, which could cause them to break and fail.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Specs. Met		Each





Polyethylene Rope with Nylon Fabric Cover
9/16"	4"	3,300	ASME B30.26	3972N11	000000
9/16"	8"	3,300	ASME B30.26	3972N12	00000
21/32"	5"	5,200	ASME B30.26	3972N13	00000
21/32"	10"	5,200	ASME B30.26	3972N14	00000
3/4"	5"	6,700	ASME B30.26	3972N15	00000
3/4"	10"	6,700	ASME B30.26	3972N16	00000
15/16"	5"	8,600	ASME B30.26	3972N17	00000
15/16"	10"	8,600	ASME B30.26	3972N18	00000