Not for Lifting Lifts | McMaster-Carr

Filter by

System of Measurement

Inch

Weight Capacity

Less than 10,000 lb.

10,000 lb. to 19,999 lb.

Shape

Length

Width

Thickness

Height

Material

Straight-Link Chain Trade Size

Inside Width

Base Length

Application

Flash-Fire Protection

For Lifting

Heat Protection

Molten-Splash Protection

Chain Grade

Inside Length

Turntable Diameter

DFARS Specialty Metals

Finish

Forklift Entry

Mobility

REACH

Base Width

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Not Compliant

Export Control Classification Number (ECCN)

Color

Fitting Type

15 Products

Adjustable Pallet Stands—Not for Lifting

Post Leg

Scissor Leg

Reduce back strain and fatigue while loading and unloading materials—these pallet stands raise pallets to a comfortable working height. They hold standard-sized pallets on a stable platform that’s accessible from all sides.

Warning: Not for lifting. Never use to hold people.

Post Leg—Post stands can be raised or lowered in 2" increments. To secure them at your desired height, loosen the included bolts, reposition the platform, and put the bolts back into the slots. These stands are not as easy to adjust as scissor pallet stands.

Scissor Leg—Scissor stands can be adjusted quickly and easily by one person. A handle and pin lock the platform securely into place. Height is manually adjustable from the folded storage height of 8 _3/4" up to 24", 30 _1/2", and 34".

Turntables—Use a turntable to rotate your load. Note: Do not exceed the capacity of the pallet stand.

	Pallet Stands												Turntables
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Material	Color	Frame Material	Frame Color	Forklift Entry	Features		Each		Each
Post Leg



		4,000	48"	40"	27 1/2" to 43 1/2"	Powder-Coated Steel	Gray	Powder-Coated Steel	Gray	No	—	23835T121	0000000	———	0


		4,000	48"	48"	27 1/2" to 43 1/2"	Powder-Coated Steel	Gray	Powder-Coated Steel	Gray	No	—	23835T122	000000	———	0


		Scissor Leg



				4,000	40"	40"	8 3/4", 24", 30 1/2", 34"	Steel	—	Steel	—	No	Handle	23835T9	000000	8771T44	0000000

Removable Figure-Eight Chain Connecting Links—Not for Lifting

Often used with transport chain, these links are good for binding, tying down, and pulling loads. To assemble, hammer the pin through the center. They’re also known as hammer locks.

	Inside Wd.	Wt. Cap., lb.	Fabrication		Each
For Grade 70 Chain







	Zinc-Plated Steel

	1/4"	3/8"	1 13/16"	19/32"	3,100	Forged	7072N11	00000


	5/16"	13/32"	2 1/4"	5/8"	4,700	Forged	7072N12	00000
	3/8"	1/2"	2 21/32"	7/8"	6,600	Forged	7072N13	00000
	1/2"	5/8"	3 13/32"	1"	11,300	Forged	7072N14	00000
	5/8"	3/4"	4 3/32"	1 11/32"	15,800	Forged	7072N15	00000

Air-Actuated Auto-Leveling Pallet Stands—Not for Lifting

These stands keep the top of your load at a convenient height; an air cylinder automatically returns the stand to your set height as you add or remove parts of your load. The turntable rotates 360° to reduce reaching. A maximum of 60 psi of air is needed for setup but not for operation. Adjust height before adding pallets. A three-position knob allows capacity adjustments while a relief valve prevents pressure build-up to provide overload protection. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.

Warning: Not for lifting. Never use to support people.

								Air Inlet
Wt. Cap., lb.	Turntable Dia.	Lg.	Wd.	Ht.	Material	Frame Material	Actuator Material	Pipe Size	Thread Type	Gender	Forklift Entry	Features	Specs. Met		Each



	250 to 4,000	43"	49"	24 3/8"	10 1/2" to 30 1/2"	Steel	Steel	Rubber	1/4	NPT	Female	Yes	Relief Valve, Turntable	ANSI MH29.1	2883T7	000000000

Spring-Actuated Auto-Leveling Pallet Stands—Not for Lifting

Use one to three springs (included) to automatically maintain a convenient ergonomic working height based on the load. A built-in damper provides smooth and gradual raising and lowering without bounce. The turntable rotates 360° to reduce reaching. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.

Warning: Not for lifting. Never use to support people.

Turntable Dia.	Lg.	Wd.	Ht.	Material	Frame Material	No. of Springs	Forklift Entry	Features		Each



400 to 4,500	43 5/8"	36 1/4"	36 5/8"	9 1/2" to 27 1/2"	Steel	Steel	3	Yes	Damper, Turntable	2914T11	000000000

Pear-Shaped Riveted Hammer-Close Chain Connecting Links—Not for Lifting

Restrict rope and chain movement with the narrow end, attach multiple connectors to the wide end, and then hammer these links closed. Using a ball peen hammer, strike the prongs until they expand and hold the link together. Made of galvanized steel, these links have a thick coating for corrosion resistance. Never reuse these links after they've been closed.

	Thk.	Inside Lg.	Narrow End Inside Wd.	Wide End Inside Wd.	Wt. Cap., lb.	Fabrication		Each
Galvanized Steel



	3/8"	7/16"	2"	9/16"	25/32"	2,200	Forged	3895N11	000000


	1/2"	1/2"	2 15/32"	11/16"	31/32"	4,000	Forged	3895N12	00000

Hand-Held Magnetic Pullers

Slide steel plates and blocks off a stack.

		Overall
	Wt. Cap., lb.	Lg.	Wd.	Ht.	For Min. Material Thk.	Material	Material Position		Each
Push Handle



		125	6 1/4"	3 3/4"	9 1/2"	1/8"	Aluminum	Horizontal, Incline	7421A32	0000000


		300	6 1/4"	7 1/4"	9 1/2"	1/8"	Aluminum	Horizontal, Incline	7421A34	000000