Light Boxes
Illuminate drawings, plans, and parts for close inspection. These light boxes have long-lasting LEDs that shine bright, even light from edge to edge, so it’s easy to see details. The box frame provides a stable, durable platform for your work.
Boxes with a plastic frame are lighter in weight than those with a stainless steel frame, so they’re easier to carry.
Lighted Surface | Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Lg. | Wd. | Ht. | Surface Material | Brightness, lumens | Plug Type | Cord Lg., ft. | Each | |
Plastic Frame | ||||||||||
| 6" | 6" | 6" | 6" | 2" | Plastic | 1,288 | Two Prong | 6 | 00000000 | 000000 |
| 10" | 8" | 10" | 8" | 2" | Plastic | 1,202 | Two Prong | 6 | 00000000 | 00000 |
| 18" | 11" | 18" | 11" | 4" | Plastic | 528 | Two Prong | 6 | 00000000 | 000000 |
| 24" | 18" | 24" | 18" | 4" | Plastic | 521 | Three Prong | 6 | 00000000 | 000000 |
| 36" | 24" | 36" | 24" | 4" | Plastic | 714 | Three Prong | 6 | 00000000 | 000000 |
Stainless Steel Frame | ||||||||||
| 11" | 9" | 12" | 10" | 3" | Plastic | 359 | Three Prong | 6 | 0000000 | 00000 |
| 17" | 10" | 18 3/8" | 11" | 3" | Plastic | 856 | Three Prong | 6 | 0000000 | 000000 |
| 17" | 15" | 18 3/8" | 16" | 3" | Plastic | 869 | Three Prong | 6 | 0000000 | 000000 |
| 23" | 17" | 24 3/8" | 18" | 3" | Plastic | 876 | Three Prong | 6 | 0000000 | 000000 |
| 35" | 23" | 36" | 24 3/8" | 3" | Plastic | 914 | Three Prong | 6 | 0000000 | 000000 |
Light Tables
A light box and drafting table in one, these tables illuminate the details of large drawings and plans. They’re also used to check circuit boards and other manufactured parts for unwanted holes, gaps, and other defects. The surface is lit from edge to edge with bright, even light from long-lasting LEDs, so it’s easy to see details. Made from impact-resistant plastic, the surface is stronger than glass and less likely to crack. It’s also less reflective, so it reduces glare during inspections. To find a comfortable angle or minimize shadows, you can lay these tables flat or tilt them up to 40°.
Lighted Surface | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Wd. | Ht. Range | Dp. | Work Surface Style | Surface Material | Assembled or Unassembled | Brightness, lumens | Plug Type | Cord Lg., ft. | Features | Each | |
Oak Top with Gray Steel Frame | |||||||||||||
| 36" | 24" | 42" | 42"-53" | 30" | Sloped | Plastic | Unassembled | 777 | Three Prong | 6 | Modesty Panel | 0000000 | 000000000 |
Illuminated Ready-To-Run Mini Belt Conveyors
Inspect parts for defects as they pass over a backlit section of these conveyors. Light shines up through the semi-clear belt to illuminate parts, making it easy to see differences in color, texture, or even what's inside. The flat belt surface keeps parts steady as they move, so they're great for moving small, loose, and irregularly shaped parts that might fall through or catch on roller and skate wheel conveyors. Use the built-in speed controls to slow down these conveyors to 10 fpm as you're inspecting parts. Or flip a switch to reverse the belt's travel if you need to send a part back. With a slim profile and small footprint, they'll fit in areas with limited space.
Plug them in and they're ready to go. To customize your setup, these conveyors have continuous T-slots along the rails for attaching side rails, guides, and custom equipment.
Add brackets to mount these conveyors on a work surface or use two stands for freestanding use. Stands mount to conveyors with the included fasteners and have leveling feet to compensate for uneven floors. They adjust to match the height of existing conveyors or stations.
Cross braces are recommended for all stands to add stability. They reduce vibration when the conveyor is operating and moving material.
Note: Capacities are based on an evenly distributed load.
Wd. | No. of Stands | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Belt | Frame | O'all Ht. | Cap., lbs. | Required | Included | Voltage | Brightness, lumens | Lighted Surface Lg. | Reversible | Features | Environmental Rating | Each | |
3 ft. Lg. | |||||||||||||
10-58 fpm | |||||||||||||
| 12" | 12 3/4" | 11 5/8" | 30 | 2 | None | 120V AC | 5,000 | 12" | Yes | Backlight On/Off Switch, On/Off Switch | Fed. Std. Class 100, ISO Class 5 | 0000000 | 000000000 |
5 ft. Lg. | |||||||||||||
10-58 fpm | |||||||||||||
| 12" | 12 3/4" | 11 5/8" | 30 | 2 | None | 120V AC | 5,000 | 12" | Yes | Backlight On/Off Switch, On/Off Switch | Fed. Std. Class 100, ISO Class 5 | 0000000 | 00000000 |
8 ft. Lg. | |||||||||||||
10-58 fpm | |||||||||||||
| 12" | 12 3/4" | 11 5/8" | 30 | 2 | None | 120V AC | 5,000 | 12" | Yes | Backlight On/Off Switch, On/Off Switch | Fed. Std. Class 100, ISO Class 5 | 0000000 | 00000000 |
| Belt Wd. | Thick. | Construction | Color | Belt Surface Type | Each | |
For 3 ft. Conveyor Lg. | ||||||
|---|---|---|---|---|---|---|
Polyurethane Rubber | ||||||
| 12" | 0.02" | 1 Ply | Semi-Clear | Smooth | 0000000 | 0000000 |
For 5 ft. Conveyor Lg. | ||||||
Polyurethane Rubber | ||||||
| 12" | 0.02" | 1 Ply | Semi-Clear | Smooth | 0000000 | 00000000 |
For 8 ft. Conveyor Lg. | ||||||
Polyurethane Rubber | ||||||
| 12" | 0.02" | 1 Ply | Semi-Clear | Smooth | 0000000 | 00000000 |
| For Speed, fpm | Motor Enclosure Type | Power, hp | Each | |
240V AC—Three Phase | ||||
|---|---|---|---|---|
| 10-58 | Totally Enclosed Nonventilated (TENV) | 1/30 | 0000000 | 0000000 |
| Lg. | For Belt Wd. | Cord Included | Features | Each | |
| 12" | 12" | No | On/Off Switch | 0000000 | 0000000 |
| Color | Mounting Fasteners Included | Each | |
| Black | Yes | 0000000 | 000000 |
| Lg., ft. | Voltage | Each | |
| 4 | 120V AC | 0000000 | 000000 |
| Plug Type | Electrical Connection Type | Power Cord Length | Voltage | Features | Each | |
| Three Prong | Plug In | 10ft. | 120V AC | On/Off Switch | 00000000 | 0000000 |