Often used in recessed can fixtures and track lighting, these bulbs produce a focused beam of light. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are commonly used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

BR and R bulbs have wide beam angles that create broad beams of light. Their length makes them good for use in large can fixtures.

PAR bulbs have narrow beam angles that provide more focused beams of light than other floodlights. A short length allows them to fit in small can fixtures without protruding.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration. Plastic LED bulbs are shatterproof.

CFL (compact fluorescent) bulbs are more energy efficient and last longer than halogen bulbs. It takes several seconds for them to reach full brightness. They contain small amounts of mercury (for disposal information, visit www.epa.gov/cfl).

Halogen bulbs are energy efficient.

Bulbs that cannot be sold to the listed regions do not meet mercury and/or energy efficiency regulations.

These bulbs produce a narrower, more concentrated beam of light than floodlight bulbs. Bulbs with a warm light appearance have yellow tones. Those with a neutral light appearance are commonly used in workspaces. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

LED bulbs last longer and are more efficient than other technologies. They generate little heat, withstand vibration, and are shatterproof.

Halogen bulbs are slightly more energy efficient than incandescent bulbs, but they generate more heat. Those with a glass lens will contain glass shards if the bulb breaks.

Bulbs that cannot be sold to the regions listed are restricted by local energy efficiency requirements.

These bulbs produce a narrower, more concentrated beam of light than floodlight bulbs. As LEDs, they last longer, are more efficient, and produce less heat than other types of bulbs. They also withstand vibration and are shatter resistant. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

PAR bulbs have narrow beam angles that provide more focused beams of light than other spotlights. A short length allows them to fit in small can fixtures without protruding. Bulbs with a 5° beam angle are designed for dock lights. The narrow beam shoots light straight to the back of a docked truck. They won't wear out or fail from frequent movement or jostling.

R bulbs have wide beam angles that create broad beams of light. Their length makes them good for use in large can fixtures.

Bulbs that cannot be sold to the listed regions do not meet energy efficiency requirements.

These bulbs have a bi-pin connection to lock into sockets. Often used in recessed can fixtures and track lighting, they produce a focused beam of light. They’re LED, so they last longer and are more efficient than other technologies. They also generate little heat and withstand vibration. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

Turn standard light bulb sockets into standalone floodlight fixtures using these bulbs, which have an aluminum reflector to focus light downward and add a finished look. Rated for use in damp locations, they withstand humidity and moisture. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. These bulbs have a cool light appearance, which is good for inspecting because it highlights white and blue tones. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

Pins on the base lock these bulbs into sockets to withstand vibration. Often used in recessed can fixtures and track lighting, they produce a focused beam of light. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

The sealed assembly withstands the rigors of outdoor use. In addition to using these bulbs in vehicles, they can be used for spot, flood, and emergency lighting. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

Halogen bulbs are slightly more efficient than incandescent, but they generate more heat.

The sealed assembly withstands the rigors of outdoor use. In addition to using these bulbs in vehicles, they can be used for spot, flood, and emergency lighting. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

2-way bulbs operate at two brightness levels, as in high and low beam headlights.