Use this bulb in ovens and equipment that reaches temperatures up to 500° F. It has a 1 1/16" dia. base and fits standard household light sockets. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

Pins on the base lock these bulbs into sockets to withstand vibration. They're often used in machines and elevators. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

These bulbs lock into GU24 light sockets with a twist. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

LED bulbs last longer and are more efficient than CFL bulbs. They generate little heat, withstand vibration, and are shatterproof.

CFL (compact fluorescent) bulbs are energy efficient but take several seconds to reach full brightness. They contain small amounts of mercury (for disposal information, visit www.epa.gov/cfl).

These bulbs cannot be sold to the listed areas due to energy efficiency and mercury regulations.

Often used in recessed can fixtures and track lighting, these bulbs produce a focused beam of light. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are commonly used in workspaces. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration. Plastic LED bulbs are shatterproof.

Bulbs that cannot be sold to the regions listed do not meet local energy efficiency requirements.

Often used in recessed can fixtures and track lighting, these bulbs produce a focused beam of light. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are commonly used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

BR and R bulbs have wide beam angles that create broad beams of light. Their length makes them good for use in large can fixtures.

LED bulbs last longer and are more efficient than other technologies. They generate little heat and withstand vibration. Plastic LED bulbs are shatterproof.

CFL (compact fluorescent) bulbs are more energy efficient and last longer than halogen bulbs. It takes several seconds for them to reach full brightness. They contain small amounts of mercury (for disposal information, visit www.epa.gov/cfl).

Halogen bulbs are energy efficient.

Trim around the bulb provides a finished look to recessed lights. With a 1 1/16" dia. base, these bulbs fit standard household light sockets. Often used in recessed can fixtures, they produce a focused beam of light. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. All bulbs have a warm light appearance with yellow tones. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

Bulbs cannot be sold to the listed areas due to energy efficiency requirements.

These bulbs produce a narrower, more concentrated beam of light than floodlight bulbs. As LEDs, they last longer, are more efficient, and produce less heat than other types of bulbs. They also withstand vibration and are shatter resistant. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

R bulbs have wide beam angles that create broad beams of light. Their length makes them good for use in large can fixtures.

Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

2-way bulbs operate at two brightness levels, as in high- and low-beam headlights.

The sealed assembly withstands the rigors of outdoor use. In addition to using these bulbs in vehicles, they can be used for spot, flood, and emergency lighting. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

Often used in task lights, these bulbs are comparable to PL, Dulux, and Biax bulbs. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

LED bulbs last longer and are more efficient than CFL bulbs. They generate little heat, withstand vibration, and are shatterproof. Plug socket-ready bulbs into an existing fixture with a compatible ballast.CFL (compact fluorescent) bulbs are energy efficient, but take several seconds to reach full brightness. They cannot be sold to the listed areas because they do not meet local efficiency standards and exceed local regulatory limits on mercury (for disposal information, visit www.epa.gov/cfl).

Energy efficient and long lasting, these bulbs are often used in task lights. They’re comparable to PL, Dulux, and Biax bulbs. It takes these bulbs several seconds to reach full brightness. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh. These bulbs cannot be sold to the listed areas because they do not meet local efficiency standards and exceed local regulatory limits on mercury (for disposal information, visit www.epa.gov/cfl).