A built-in sensor turns these bulbs on when it gets dark, then off when it’s light out. Change the light appearance with a switch on the side.

PAR38 bulbs have a narrow beam angle that provides a focused beam of light. They’re a good choice for outdoor security lighting.

Convert any standard socket into a security light. These bulbs have a built-in sensor that turns them on when it detects movement in the dark. They shut off five minutes after motion stops. You can change the light appearance with a switch on the side.

PAR38 bulbs have a narrow beam angle that provides a focused beam of light.

Lock these bulbs into GU24 sockets with a twist.

Bulbs with a selectable light appearance have a switch on the side, so you can match other lights in your room.

Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Color rendering index (CRI) is a measurement on a scale of 0-100 of how accurately the light from a bulb represents an object's true colors; the higher the number, the more natural the colors appear. Any CRI value over 80 will show colors true to life. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool or daylight appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

LED bulbs last longer and are more efficient than fluorescent bulbs. They generate little heat and withstand vibration. Plastic bulbs are shatterproof. Socket-ready bulbs work with most instant-start electronic ballasts, but not all. For a full list of compatible ballasts select a part number and view product detail. Ballast bypass bulbs eliminate the need for a ballast so the socket must be wired directly to the power source.

Fluorescent bulbs are energy efficient, but they contain small amounts of mercury (for disposal information, visit www.epa.gov/cfl). Plastic-coated glass bulbs are shatter resistant; the coating retains glass shards if they break.

Bulbs that cannot be sold to the areas listed exceed local regulatory limits on mercury and/or do not meet local efficiency standards.

Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Color rendering index (CRI) is a measurement on a scale of 0-100 of how accurately the light from a bulb represents an object's true colors; the higher the number, the more natural the colors appear. Any CRI value over 80 will show colors true to life. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

LED bulbs last longer and are more efficient than fluorescent bulbs. They generate little heat and withstand vibration. To install, bypass the ballast by wiring the socket directly to the power source.

Plastic-coated glass bulbs are shatter resistant; the coating retains glass shards if they break.

Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Color rendering index (CRI) is a measurement on a scale of 0-100 of how accurately the light from a bulb represents an object's true colors; the higher the number, the more natural the colors appear. Any CRI value over 80 will show colors true to life. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool or daylight appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Bulbs cannot be sold to the listed areas because they do not meet local regulatory limits on mercury and/or local energy efficiency requirements.

Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Color rendering index (CRI) is a measurement on a scale of 0-100 of how accurately the light from a bulb represents an object's true colors; the higher the number, the more natural the colors appear. Any CRI value over 80 will show colors true to life. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool or daylight appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

LED bulbs last longer and are more efficient than fluorescent bulbs. They generate little heat, withstand vibration, and are shatterproof. LED bulbs are socket ready. They plug directly into a fixture and work with most instant-start electronic ballasts, but not all. For a full list of compatible ballasts select a part number and view product detail.

Fluorescent bulbs are energy efficient, but they contain small amounts of mercury (for disposal information, visit www.epa.gov/cfl).

Bulbs that cannot be sold to the areas listed do not meet local regulatory limits on mercury content and local energy efficiency requirements.

Replace the metal-halide light bulbs in your fixture.

Bulbs for open fixtures have a strong outer shell to keep them from shattering if they fail.

Bulbs with an EX39 base can also be used in E39 sockets.

Bulbs that cannot be sold to Canada exceed local regulatory limits on mercury content.

Often used in task lights, these bulbs are comparable to PL, Dulux, and Biax bulbs. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

LED bulbs last longer and are more efficient than CFL bulbs. They generate little heat, withstand vibration, and are shatterproof. Plug socket-ready bulbs into an existing fixture with a compatible ballast. Ballast bypass bulbs eliminate the need for a ballast so the socket must be wired directly to the power source.

CFL (compact fluorescent) bulbs are energy efficient, but take several seconds to reach full brightness. They cannot be sold to the listed areas because they do not meet local efficiency standards and exceed local regulatory limits on mercury (for disposal information, visit www.epa.gov/cfl).

Energy efficient and long lasting, these bulbs are often used in task lights. They’re comparable to PL, Dulux, and Biax bulbs. It takes these bulbs several seconds to reach full brightness. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh. These bulbs cannot be sold to the listed areas because they do not meet local efficiency standards and exceed local regulatory limits on mercury (for disposal information, visit www.epa.gov/cfl).