A motor and speed reducer in one, these gearmotors have hypoid gears for energy-efficient operation. You can use them to turn a shaft on your equipment or add a keyed shaft (sold separately). Wire for clockwise or counterclockwise rotation; instructions are included. Gearmotors meet IP54 for protection from dust and splashed water. They're inverter rated so you can use them with a motor speed control (not included) to adjust the motor speed.

For technical drawings and 3-D models, click on a part number.

Achieve precise, constant speed for timing and positioning applications. Also known as synchronous gearmotors, these gearmotors use a frequency of 50/60 Hz to maintain speed and torque.

For technical drawings and 3-D models, click on a part number.

Turn speed into torque with these AC-powered gearmotors—they combine a motor and a speed reducer into one. You can wire them for clockwise or counterclockwise rotation; instructions are included. The parallel shaft transmits motion inline with the motor.

Base-mount motors come with a base, so they can be secured to a flat surface. Face-mount motors bolt directly to your equipment. Base/face-mount motors give you the flexibility to mount directly onto equipment or to the included base.

TEFC (totally enclosed fan cooled) motors have an enclosure to protect them from dirt, dust, and moisture. An external fan blows air on the enclosure to keep them cool. TENV (totally enclosed non-ventilated) enclosures are similar to TEFC enclosures, except they do not have a fan. They rely on air circulation from the motion of the motor for cooling.

230/460V AC motors are inverter-rated, so you can adjust the speed with a motor speed control (not included).

For technical drawings and 3-D models, click on a part number.

Power equipment in applications with limited space. Gearmotors have a motor matched with a speed reducer to lower speed while increasing torque. An optional plastic fan is included to improve cooling when using the gearmotor in a clockwise direction.

To reverse the direction of the gearmotor, loosen the mounting screws, remove the stator, and rotate it 180°. You’ll also need to replace the original fan blades with fan blades for counterclockwise shaft rotation (sold separately).

For technical drawings and 3-D models, click on a part number.

Sized for small spaces, these gearmotors mount from the base or face for flexibility to fit in tight locations. Each has a motor matched with a speed reducer to lower speed while increasing torque. An optional plastic fan is included to improve cooling when using the gearmotor in a clockwise direction.

To reverse the direction of the gearmotor, loosen the mounting screws, remove the stator, and rotate it 180°. You’ll also need to replace the original fan blades with fan blades for counterclockwise shaft rotation (sold separately).

For technical drawings and 3-D models, click on a part number.

A good solution for tight spaces, these gearmotors let you control the start, stop, rotation direction, and speed while transmitting motion at a 90° angle from the motor, so you can mount them alongside your application. They combine a motor with a speed reducer to lower speed while increasing torque. All have a mounted keypad to make changes to the integrated speed control. Mount them to flat surfaces using their base. These gearmotors have a TEFC (totally enclosed fan cooled) enclosure that protects better than an ODP (open dripproof) enclosure. They aren’t airtight, but they can be used in dirty, dusty, and damp environments. To keep the motor cool, the enclosure has an external fan that blows air over the outside of the motor.

For technical drawings and 3-D models, click on a part number.