To suspend lights from the ceiling, connect the hooks to a fixture and pull the wire rope sling through the included rope clamps. No tools required—adjust the length and tighten rope clamps to secure.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. They are CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They are rated NEMA 4X for protection against corrosion and washdowns. Lights are sealed to keep moisture out. They can be hardwired to operate on any of the voltages listed. Some work with LED or incandescent bulbs (sold separately).

Styles 1, 2, 3, 5, and 6 can be used in environments where ignitable concentrations of flammable/combustible gases, vapors, and liquids or combustible dust occur infrequently, such as in the case of an accidental spill or failure of a ventilation system, and where combustible/ignitable fibers or flyings are present under normal operating conditions and/or during frequent equipment maintenance or failure. Rated for Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III, Divisions 1 and 2, these lights withstand acetylene, hydrogen, ethylene, propane, carbonaceous dusts, and nonconductive dusts.

Hang these lights where you need them on the job site.

Styles A-E come with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light that highlights white/blue tones, which is good for inspecting. The LEDs in Styles A, B, C, and E are built-in, while Style D come with a replaceable LED bulb. All have an impact-resistant plastic lens to protect the LEDs.

Styles F and G are furnished with replaceable fluorescent bulbs. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting. Fluorescent lights last longer and generate less heat than halogen lights. All have an impact-resistant plastic lens to protect the bulb.

Style H come with a replaceable incandescent bulb. They have an impact-resistant plastic lens to protect the bulb.

Styles J and K are compatible with medium-base screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately), except 1550K33 is compatible with medium-base screw-in incandescent and LED bulbs. Style J have a steel guard to protect the bulb. Style K have a plastic lens.

Style L are compatible with medium-base screw-in CFL (compact fluorescent), incandescent, and LED bulbs (sold separately). They accommodate a spot or flood bulb. These lights have a steel guard to protect the bulb.

Bulbs that cannot be sold to Canada exceed local regulatory limits on mercury content

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of the lights have a hook for hanging when you need both hands for other work.

Styles A and B lights are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately). They have a zinc-plated steel guard to protect the bulb.

Style C lights are furnished with an incandescent bulb and an impact-resistant plastic lens.

Styles D and E lights have built-in LEDs that last longer, are more effiecent, and generate less heat than other light technologies. They have a cool or daylight appearance that highlights white/blue tones, which is good for inspecting. They have an impact-resistant plastic lens to protect the LEDs.

A series of bulb heads are attached to a power cord to provide overhead lighting for jobsites. The cord has a plug on one end and a female connector on the other end, so you can connect multiple strings to illuminate larger areas.

Style A lights are compatible with medium-base, screw-in CFL (compact fluorescent), incandescent, and LED bulbs (sold separately). They have a plastic-coated steel guard to protect the bulb.

Style B has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a daylight appearance that highlights white/blue tones, which is good for inspecting. For use in wet environments, there is a seal between the lens and the housing to keep out dripping, splashing, and falling liquids.

Use sun energy to bring light to remote areas and storage spaces without electrical wiring. These lights come with a solar panel to recharge their battery. Simply connect the lights to the panel and place the panel in full sunlight to charge. To power the battery faster, you can also plug these lights into a charger using the included USB cable. A USB output port allows you to power other smart devices and accessories with these lights, as well.

All lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a neutral light appearance that’s often found in workspaces. An impact-resistant plastic lens protects the LEDs. You can dim these lights to conserve battery life. To use them as a security light in unsupervised areas at night, set them to auto mode—they’ll turn on automatically in the dark or when they detect motion.

Use the included mounting holes and brackets to secure these lights permanently to the wall, or hang them temporarily with the included fold-out D-rings. The solar panel also has a mounting bracket to secure the panel to horizontal and vertical surfaces. It’s adjustable, so you can rotate and tilt the panel to achieve the best angle for maximum sunlight exposure.

These lights cannot be sold to Canada due to energy efficiency regulations.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They have an impact-resistant plastic lens to protect the LEDs.

Bring light to areas that don't have electrical power service. This light has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a neutral white light that's often found in workspaces. This light has an impact-resistant plastic lens to protect the LEDs.

Use these with portable lights that use screw-in bulbs. They are not for use with insulated, wet-location, or hazardous location portable lights.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight. NEMA 4X is widely considered the standard NEMA rating. These lights are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

PTFE plastic lenses are impact resistant.

Tempered glass lenses are more durable than plastic lenses; they have a zinc-plated steel guard to protect them.