Choosing an Electrical Switch
More
Fixture-Mount Motion-Sensing Light Controls
Detect motion near your light fixture to turn lights on and off. Compared to switch-mount motion controls that detect from a single wall, these controls have a better view of the entire space since they sense motion from above. Also known as occupancy sensors, these controls have an infrared sensor that activates when it detects a change in heat. To work properly, they need an unobstructed view of your space. All have a time delay to turn lights off after a set time. Rated IP65, these controls are protected from washdowns.
These light controls monitor motion in a full circle for coverage in all directions. Those that cover 7,690 sq. ft. have lenses that can be swapped out to limit where they sense. Half-circle sensing lenses are best for concentrating coverage to a certain part of a room, such as a workstation or an entrance. Narrow sensing lenses are best for the end of aisles in spaces with high ceilings like those in warehouses and factories.
For technical drawings and 3-D models, click on a part number.
Light Controls | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Conduit | Mounting Extensions | |||||||||||||||||||
| Coverage, sq. ft. | Features | Sensing Spread | No. of Circuits Controlled | Input Voltage  | Wattage | Max. Mounting Ht., ft. | Color | Housing Material | Connection Gender | Trade Size | Thread Type | Ht. | Dia. | Dp. | Wire Connection Type | Specifications Met | Each | Each | ||
| 7,690 | __ | Full Circle | 1 | 120V AC 277V AC | 800 W @ 120 V AC 1,200 W @ 277 V AC | 45 | White | Plastic | Male | 1/2 | NPT | 2 1/8" | 4" | 4 3/4" | Wire Leads | UL Listed, C-UL Listed | 0000000 | 0000000 | 0000000 | 000000 |
| 7,690 | Dimmer Switch | Full Circle | 1 | 120V AC 277V AC | 800 W @ 120 V AC 1,200 W @ 277 V AC | 45 | White | Plastic | Male | 1/2 | NPT | 2 1/8" | 4" | 4 3/4" | Wire Leads | UL Listed, C-UL Listed | 00000000 | 000000 | 000000 | 00 |
Wall-Mount Motion- and Light-Sensing Light Controls
Never worry about turning lights on and off again. These controls turn lights on when people enter the room and off when rooms are empty or are bright enough. They use both an infrared motion sensor to detect the presence of people and a light sensor to determine ambient light. They have a swivel bracket to aim the sensor where people will be.
Power controllers (sold separately) are required to switch a 120- or 277-volt AC lighting circuit. They have a relay that switches a maximum 20 amp load.