Choose an actuator and contact block to make your own 22 mm plastic switch.

The wide surface of these switches makes them easy to press on and off, even if your hands are full and you need to use an elbow.

Maximize space in a panel—these switches are smaller than most standard rocker switches.

A quick push is all it takes to actuate these switches.

A housing seals in anything that could ignite flammable material, so you can use these switches where explosive gas, dust, and fibers may be. They actuate with a quick push.

A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.

Install in 14 mm dia. cutouts.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Immediately cut power with a single push.

Actuate these switches with a quick push.

These familiar push-button switches mount to flat surfaces.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.

These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.

Prevent accidental actuation from bumps or jostles—these switches require you grip and twist a lever to turn them on or off. Install them in 30 mm dia. cutouts.

Avoid accidental actuation—these switches won’t turn on or off until you grip and twist the lever. Install in a 16 mm dia. cutout.

The light touch of a finger turns circuits on and off without pressing down a contact. Program these switches to fit your application—control their color, pattern, and sensitivity.

Use fingerprints to confirm the identity of personnel before granting access to secure areas or equipment.

Similar to a seesaw, these switches have an actuator that pivots when pressed to turn them on or off.