Rated NEMA 3S and IP69K, these switches can handle washdowns with high pressures and temperatures. They’re also protected from oil/coolant spraying, precipitation, and temporary submersion. When an object in motion contacts the actuator, it sends a signal to open or close a circuit. These switches have the rapid-closing action of a snap-acting switch, but with a larger actuator. This makes them a good choice for use with large objects—for instance, a box on a conveyor runs into the switch, stopping the conveyor.

Switches with a plunger actuator require a push to actuate, similar to a button.

Switches with a roller plunger actuator trigger just like a plunger actuator but reduce friction during actuation thanks to their roller. This limits wear and tear on the switch.

Switches with a roller lever actuator combine the larger actuation area of a standard lever with a smooth gliding roller actuator. They minimize friction to limit wear and tear on your switch.

Switches with a rod actuator use a rod extending out of the body to actuate, so they’ll activate even if an object is far away.

Switches with a wobble stick actuator have an arm that rotates 360°, so you don’t need to align it in a specific direction. Since the actuator is flexible, it won’t snap if pushed backward. That makes these switches a great choice for systems that get jammed often.

Styles D, E, and F let you adjust the actuator’s height to align it with your target.

Also known as inductive proximity switches, these detect metallic objects even if they’re obscured by water, oil, dirt, or a surface finish. Sensing distance is based on the target material. The distance listed is for mild steel. They’re often used with programmable logic controllers (PLCs) and produce PNP or NPN signal output. To determine the signal output of a switch you are replacing, use Testers for Proximity and Photoelectric Switches (not included).

Flush switches, also known as embeddable or shielded switches, can be mounted so that the sensor face is level with the surface of any material, including metal. They’re more accurate than projecting switches at close range and can be mounted close together without causing interference. Projecting switches, also known as non-embeddable or unshielded switches, must be mounted with the area around the sensor face free of metal. They have a longer sensing distance than flush switches with the same diameter.

Switches with a plug connect to cables with a socket (sold separately), allowing you to quickly connect and disconnect the switch.

Switches with IO link can be configured remotely when connected to a PLC, a human-machine interface (HMI), or a computer.

IP67 and IP68 rated switches are protected from temporary submersion. NEMA 6P rated switches are protected from corrosion and washdowns.

Also available: If you don’t see the switch you need, please select 6693T999 and specify manufacturer and manufacturer part number.

Sense objects from farther away than with other proximity switches that have the same diameter. Also known as inductive proximity switches, they remotely sense metallic objects even if they’re obscured by water, oil, dirt, or a surface finish. Sensing distance is based on the type of material being sensed. The distance listed is for mild steel. They’re often used with programmable logic controllers (PLCs) and produce PNP signal output. Some automatically sense whether PNP or NPN signal output is needed.

Flush switches, also known as embeddable or shielded switches, can be mounted so that the sensor face is level with the surface of any material, including metal. They’re more accurate than projecting switches at close range and can be mounted close together without causing interference.

Projecting switches, also known as non-embeddable or unshielded switches, must be mounted with the area around the sensor face free of metal. They have a longer sensing distance than flush switches with the same diameter.

Switches with a 4-pole Micro M12 plug connect to cables with a socket (sold separately), allowing you to quickly connect and disconnect the switch.

All are rated IP69K for protection from high-temperature, high-pressure washdowns. Some are also rated NEMA 6P, 13, and IP67 for protection from corrosion, oil/coolant spraying, and temporary submersion.

Also available: If you don’t see the switch you need, please select 6693T999 and specify manufacturer and manufacturer part number.

Sense objects from farther away than with other proximity switches that have the same diameter. Also known as inductive proximity switches, they remotely sense metallic objects even if they’re obscured by water, oil, dirt, or a surface finish. Sensing distance is based on the type of material being sensed. The distance listed is for mild steel. All are rated NEMA 6P, 13, IP67 and IP69K.

Flush switches, also known as embeddable or shielded switches, can be mounted so that the sensor face is level with the surface of any material, including metal. They’re more accurate than projecting switches at close range and can be mounted close together without causing interference.

Projecting switches, also known as non-embeddable or unshielded switches, must be mounted with the area around the sensor face free of metal. They have a longer sensing distance than flush switches with the same diameter.

Switches with a 3-pole Micro M12 plug connect to cables with a socket (sold separately), allowing you to quickly connect and disconnect the switch.

Also available: If you don’t see the switch you need, please select 6693T999 and specify manufacturer and manufacturer part number