McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    36 Products

    MIG Welders

    Image of Product. Front orientation. MIG Welders.
    Powerful, practical, and made in the U.S., our Lincoln MIG welder plugs into common 120V outlets to produce an output range of 30-140 amps. That’s enough power to weld steel as thick as 3/16" in a single pass.
    The system comes with a gun, nozzles, contact tips, sample spools of wire, and everything else you need for gasless, flux-cored welding. For solid-core MIG welding, connect the regulator to a tank of shielding gas (not included).
    For
    Material Thk.
    For Sheet
    Metal Thk.
    Input
    For Wire
    Construction
    For Welding Wire
    Construction
    For Wire Dia.
    Min.
    Max.
    Min.
    Max.
    Voltage,
    V AC
    Freq.,
    Hz
    Electrical
    Phase
    Output Current
    @ Voltage
    Includes
    Each
    Lincoln Easy-MIG 140
    Solid
    		Flux Core0.025", 0.030", 0.035"1/64"11/64"24 Ga.7 Ga.12060Single90 amp @ 19.5V DCWelding Gun Contact Tips
    1/2-lb. Spool of 0.025" Copper-Coated Steel Solid Wire
    1/2-lb. Spool of 0.035" Steel Flux-Core Wire
    10-ft. Ground Cable with Ground Clamp
    Welding Hose
    Argon-Mixed Gas Regulator
    Gas Nozzle for Welding Solid-Core Wire
    Gasless Nozzle for Welding Flux-Core Wire    		7264A120000000
     
    Accessories for MIG Welders
    Carts
    Image of Product. Front orientation. Carts.
    Transport your welder from place to place while securing your gas tank from falling over. The angled top surface allows for easy access to the welder’s controls, with a lower tray for added storage.
    Lg.
    Wd.
    For Max. Gas
    Tank Dia.
    Each
    27"11 3/4"7"7264A1130000000
    Aluminum Welding Kits for MIG Welders
    Image of Product. Top orientation. Aluminum Welding Kits for MIG Welders.
    Kits include a spool gun that houses aluminum wire in the gun itself, reducing the length of travel and risk of tangles.
    Includes
    Each
    Gun with Spool Mount
    1-lb. Spool of 0.035" 4043 Aluminum Solid Wire
    Welding Gun Contact Tips
    Electric Harness with Toggle Switch
    Carrying Case    		7264A150000000

    MIG Guns

    Image of Product. Front orientation. MIG Guns. Standard Gun.

    Standard Gun

    Image of Product. Front orientation. MIG Guns. Spool Gun.

    Spool Gun

    Pair these guns with a welder to direct the flow of MIG welding wire and electric current. With no need for a filler rod, MIG welding is faster than TIG welding, and ideal for thick base metals, including iron beams and carbon steel. At four pounds or less, our MIG guns are comfortable to hold, ensuring steady-handed results with every job. Guns with longer duty cycles can weld at their full amperage for longer periods of time without overheating.
    Check the max current amperage and manufacturer of your welder. Using a gun with a higher amperage than your welder can cause damage to both.
    Spool Gun—Spool MIG guns house wire in the gun, closer to where you’re welding, rather than in the welder itself. Often used for welding aluminum, they prevent soft wire from kinking in your cable since it doesn’t have to travel as far.
    For Wire
    Max. Current,
    amp
    For Mfr.
    Mfr. Model No.
    Construction
    Dia.
    Duty Cycle
    Cable Lg.,
    ft.
    Cable
    Material
    Includes
    Each
    Standard Gun
     
    Air Cooled
    100LincolnLincoln Magnum 100LSolid, Flux Core, Metal Core0.025", 0.030", 0.035"4 Minutes On, 6 Minutes Off10RubberContact Tip
    Nozzle    		77365A820000000
    180ESAB, LincolnTweco No. 1Solid, Flux Core, Metal Core0.030", 0.035", 0.040", 0.045"6 Minutes On, 4 Minutes Off15RubberContact Tip
    Nozzle    		77365A42000000
    200LincolnLincoln Magnum 200Solid, Flux Core, Metal Core0.025", 0.030"6 Minutes On, 4 Minutes Off15RubberContact Tip
    Nozzle    		77365A83000000
    250ESAB, LincolnTweco Velocity2 Spray Master 250Solid, Flux Core, Metal Core0.035", 0.040", 0.045"8 Minutes On, 2 Minutes Off15RubberContact Tip
    Nozzle    		77365A28000000
    250LincolnLincoln Magnum 250LSolid, Flux Core, Metal Core0.025", 0.030", 0.035", 0.040", 0.045"4 Minutes On, 6 Minutes Off15RubberContact Tip
    Nozzle    		77365A84000000
    300LincolnLincoln Magnum 300Solid, Flux Core, Metal Core0.035", 0.040", 0.045"6 Minutes On, 4 Minutes Off10RubberContact Tip
    Nozzle    		77365A86000000
    350ESAB, LincolnTweco Velocity2 Spray Master 350Solid, Flux Core, Metal Core0.063"8 Minutes On, 2 Minutes Off15RubberContact Tip
    Nozzle    		77365A47000000
    400LincolnLincoln Magnum 400Solid, Flux Core, Metal Core0.045", 0.047", 0.052", 0.063"6 Minutes On, 4 Minutes Off15RubberContact Tip
    Nozzle    		77365A87000000
     
    Spool Gun
     
    Air Cooled
    130LincolnLincoln Magnum Pro 100SGSolid, Flux Core, Metal Core0.030", 0.035"3 Minutes On, 7 Minutes Off10Rubber1-lb. Spool of 0.035" ER4043 Solid Wire
    Three Contact Tips
    Nozzle
    Carrying Case    		3729N552000000
     

    Multiprocess Welders

    Image of Product. Front orientation. Multiprocess Welders.
    Repair most metal with a single machine—these welders perform MIG, TIG, and stick welds. Often used for general purpose applications, MIG welding is faster than other techniques and easiest to learn. TIG welding works on thin metal and leaves a clean appearance, so it’s commonly used for finish work. Stick welding is best for heavy duty welds on thick or dirty metal. It’s also the easiest to do outdoors, since it doesn’t use shielding gas that could be affected by wind.
    Input
    For Wire
    Construction
    For Welding Wire
    Construction
    For Wire Dia.
    For Min.
    Material Thk.
    For Min.
    Sheet Metal Ga.
    Duty Cycle
    Voltage,
    V AC
    Frequency,
    Hz
    Electrical
    Phase
    Output Current @ Voltage
    Wt.,
    lb.
    Includes
    Each
    Lincoln K3461-1
    Solid
    		Flux Core0.025", 0.030", 0.035"1/64"24 Ga.6 Minutes On, 4 Minutes Off12060Single115 amp @ 15V AC
    80 amp @ 23V AC
    95 amp @ 19V AC    		351/2-lb. Spool of 0.025" ER70S-6 Solid Wire
    1/2-lb. Spool of 0.035" E71T-11 Flux-Core Wire
    10-ft. Ground Cable with Ground Clamp
    Gas Nozzle for Welding Solid-Core Wire
    Gas Regulator
    Gasless Nozzle for Welding Flux-Core Wire
    Welding Gun Contact Tips    		3729N110000000
     
    Accessories for Multiprocess Welders
    TIG Torches
    Image of Product. Front orientation. TIG Torches.
    TIG torches are required for TIG welding.
    Torch Body
    Type
    Duty Cycle
    Max. Current,
    amp
    Cooling
    Method
    Cable Lg.,
    ft.
    Cable
    Material
    Includes
    Each
    Rigid Neck6 Minutes On, 4 Minutes Off125Air12.5RubberCable and Hose Assembly
    Long Back Cap
    Torch Body
    Torch Handle    		3729N5530000000
    Welding Foot Pedals
    Image of Product. Front orientation. Welding Foot Pedals.
    Welding foot pedals let you control amperage while TIG welding.
    Cable Lg.,
    ft.
    Each
    133729N5540000000
    MIG Spool Guns
    Image of Product. Front orientation. MIG Guns.
    MIG spool guns hold welding wire for use when MIG welding aluminum.
    For Wire
    Construction
    For Welding Wire
    Construction
    For Wire Dia.
    Duty Cycle
    Max. Current,
    amp
    Cooling
    Method
    Cable Lg.,
    ft.
    Cable
    Material
    Includes
    Each
    Spool Gun
    SolidFlux Core, Metal Core0.030", 0.035"3 Minutes On, 7 Minutes Off130Air10Rubber1-lb. Spool of 0.035" ER4043 Solid Wire
    Three Contact Tips
    Nozzle
    Carrying Case    		3729N5520000000
     
    Carts
    Image of Product. Front orientation. Carts.
    Use carts to transport welders, gas, and accessories.
    Lg.
    Wd.
    For Max. Gas
    Tank Dia.
    Each
    27"11 3/4"7"7264A1130000000

    MIG Gun Nozzles

    Image of Product. Front orientation. MIG Gun Nozzles. Recessed Nozzle.

    Recessed Nozzle

    Direct shielding gas towards welds and protect contact tips from molten metal.
    Recessed Nozzle—Recessed nozzles are the most common and work well in most welding applications. They let your wire stick out 1/2”-3/4” from the contact tip, so the tip is away from the high heat of the arc and lasts longer. When your wire sticks out, there is also less of a chance it will melt and fuse to the contact tip.
    For
    Mfr.
    For Manufacturer
    Model Number
    Bore
    Size
    Each
    Recessed Nozzle
    LincolnMagnum 200, Magnum 250L1/2"78375A1900000
    LincolnMagnum 300, Magnum 4003/4"78375A2100000
    Lincoln
    Tweco    		Magnum 100L
    Mini No. 1, No. 1    		3/8"78375A64700000
    Lincoln
    Tweco    		Magnum 100L
    Mini No. 1, No. 1    		1/2"78375A64800000
    Lincoln
    Tweco    		Magnum 100L
    Mini No. 1, No. 1    		5/8"78375A64900000
    Lincoln
    Tweco    		Magnum 200, Magnum 250L
    No. 2    		1/2"78375A8510000
    Lincoln
    Tweco    		Magnum 200, Magnum 250L
    No. 2    		5/8"78375A8740000
    Lincoln
    Tweco    		Magnum 300, Magnum 400
    No. 3, No. 4    		1/2"78375A86100000
    Lincoln
    Tweco    		Magnum 300, Magnum 400
    No. 3, No. 4    		5/8"78375A86200000
     

    MIG Gun Gas Diffusers

    Image of Product. Front orientation. MIG Gun Gas Diffusers.
    Conduct electricity to your contact tip and evenly distribute shielding gas for high-quality welds. These diffusers reduce turbulence so the gas stays where you need it, which shields the weld and keeps it strong by preventing oxidation and pitting.
    For
    Mfr.
    For Mfr. Model No.
    Material
    Lg.
    Each
    LincolnMagnum Pro 100L, Magnum Pro 100SGCopper1 1/2"90573A120000000
    Lincoln
    Tweco    		Magnum 200, Magnum 250L
    No. 2    		Brass2"90573A17000000
    Lincoln
    Tweco    		Magnum 300, Magnum 400
    No. 3, No. 4    		Brass1 1/4"90573A1800000

    MIG Gun Contact Tips

    Image of Product. Front orientation. MIG Gun Contact Tips. Standard Tip.
    Image of Product. Front orientation. MIG Gun Contact Tips. Tapered Tip.

    Standard Tip

    Tapered Tip

    Attach these tips to MIG guns to guide welding wire and electric current to the weld site.
    Tapered Tip—Tapered tips are good for welding on edges and in tight spaces, such as corners.
    For Mfr.
    For Mfr. Model No.
    Choose a Wire Diameter
    Pkg.
    Qty.
    Pkg.
    Standard Tip
    Lincoln
    Tweco    		Magnum 100L
    Mini No. 1, No. 1
    0.023"/0.025"
    ,
    0.030"
    ,
    0.035"
    		1078375A542000000
    Lincoln
    Tweco    		Magnum 200, Magnum 250L, Magnum 300, Magnum 400
    No. 2, No. 3, No. 4
    0.023"/0.025"
    ,
    0.030"
    ,
    0.035"
    ,
    0.040"
    ,
    0.045"
    ,
    0.052"
    ,
    0.063"
    		1078375A54300000
     
    Tapered Tip
    LincolnMagnum Pro 100SG
    0.030"
    ,
    0.035"
    		578375A620000
    Lincoln
    Tweco    		Magnum 100L
    Mini No. 1, No. 1
    0.025"
    ,
    0.030"
    ,
    0.035"
    ,
    0.045"
    		1078375A55900000
    Lincoln
    Tweco    		Magnum 200, Magnum 250L, Magnum 300, Magnum 400
    No. 2, No. 3, No. 4
    0.025"
    ,
    0.030"
    ,
    0.035"
    ,
    0.045"
    		1078375A54900000
     

    MIG Gun Insulators

    Image of Product. Lincoln and Tweco. Front orientation. MIG Gun Insulators. Lincoln Tweco.

    Lincoln and Tweco

    Form a seal between nozzle and gun to protect the nozzle from heat and damage while welding.
    For
    Mfr.
    For Mfr. Model No.
    Lg.
    Each
    Lincoln
    Tweco    		Magnum 200
    No. 2    		7/8"78375A66300000
    Lincoln
    Tweco    		Magnum 300, Magnum 400
    No. 3, No. 4    		1 1/16"78375A6640000

    MIG Welding Liners

    Image of Product. Front orientation. MIG Welding Liners.
    Guide MIG welding wire through the gun to the contact tip.
    For Manufacturer Model Number
    For Wire Dia.
    Lg.,
    ft.
    Each
    Lincoln Magnum 300, Magnum 4000.030", 0.035"1578375A832000000
    Lincoln Magnum 300, Magnum 4000.040", 0.045"1578375A83400000
    back to top