Compact Machine-Mount Aligning Line Lasers
This laser is sized for mounting on machinery to ensure tools are properly positioned. You can also use it in conjunction with machine-vision cameras to serve as a reference location for making measurements. It has wire leads with a plug that fits an optional transformer (sold separately), or cut off the plug to connect to a DC power source. The size of the line increases as the distance increases. Laser light is red and is best viewed indoors.
Optional mount has a magnetic base and mounting holes.
Compact Machine-Mount Aligning Adjustable Dot Lasers
Fine-tune the size of the laser dot. This laser is sized for mounting on machinery to ensure tools are properly positioned. You can also use it in conjunction with machine-vision cameras to serve as a reference location for making measurements. Laser light is red and is best viewed indoors.
Overall | Mount. Holes | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Accuracy | Range | Dot Size | Laser Class | Wavelength, nm | Lg. | Wd. | Ht. | Mounting Fasteners Included | No. of | Dia. | Plug Type | Cord Lg., ft. | Voltage | Includes | Each | |
1/8" @ 130 ft. | 500 ft. | 1/16" @ 2 ft., 2 1/2" @ 500 ft. | Class IIIa | 650 | 1 1/4" | 1" | 1 3/16" | No | 8 | 1/8" | Two Prong | 6 | 110V AC | Fixed Mount, Transformer | 0000000 | 0000000 |
Compact Machine-Mount Aligning Dot Lasers
These lasers are sized for mounting on machinery to ensure tools are properly positioned. You can also use them in conjunction with machine-vision cameras to serve as a reference location for making measurements. They have wire leads with a plug that fits an optional transformer (sold separately), or cut off the plug to connect to a DC power source. The size of the dot increases as the distance increases. Laser light is red and is best viewed indoors.
Optional fastener/magnet mounts have a magnetic base and mounting holes. Optional clamp mounts clamp onto conduits that are approximately 1” in diameter, such as those found in older factories and warehouses.
Machine-Mount Aligning High-Visibility Line Lasers
Projecting a light that's even and bright the entire length, these lasers create a line that can be measured from end to end. They're compatible with machine-vision cameras, so they're often used as a reference point for machine inspection and robot guidance. Their green light is brighter and easier to see outdoors, in strongly lit rooms, and from farther away than red lasers. As their light travels, the diameter of their beam grows. They come with an adjustable angle mount that rotates 360°, letting you position the laser at the correct angle for your job. Rated IP67, these lasers are dust and liquid tight, so you can use them in dusty or wet areas such as labs, warehouses, or marine environments.
120V AC lasers plug into standard outlets.
12V DC lasers draw power through their wire leads. Connect these lasers to devices such as programmable logic controllers (PLCs) and timer relays to automate when they turn on and off. However, you can’t plug them into standard outlets.
Use magnetic mounts to attach these lasers to machines and other steel surfaces instead of drilling holes and bolting them. They hold lasers at a fixed angle, but you can combine them with the adjustable angle mount for 360° rotation.
Machine-Mount Aligning High-Visibility Line Lasers | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Optional Magnetic Mount | ||||||||||||||
Range | Line Size | Laser Class | Laser Color | Wavelength, nm | Lg. | Dia. | Electrical Connection Type | Temperature Range, °F | Environment | Environmental Rating | Includes | Each | Each | ||
120V AC | |||||||||||||||
150 ft. | 165 ft. @ 150 ft. | Class IIIa | Green | 520 | 4" | 3/4" | Plug | 0° to 140° | Dusty, Submersible | IP67 | AC Adapter | 0000000 | 0000000 | 0000000 | 0000000 |
12V DC | |||||||||||||||
150 ft. | 165 ft. @ 150 ft. | Class IIIa | Green | 520 | 4" | 3/4" | Hardwire | 0° to 140° | Dusty, Submersible | IP67 | __ | 0000000 | 000000 | 0000000 | 000000 |
Dust- and Moisture-Resistant Machine-Mount Aligning Lasers
Red Laser | |
Green Laser |
With a sealed lens and an IP67 rating, these lasers are dust and liquid tight, so you can mount them to machines in dusty or wet areas such as labs, warehouses, or marine environments to align components.
Red lasers are best for indoor environments because they’re dimmer than green lasers.
Green lasers appear up to 10 times brighter than red lasers, so they’re easier to see outdoors, in bright indoor lighting, and from far away.
Position these lasers at the correct angle for your job with adjustable angle mounts. They allow 360° rotation.
Use magnetic mounts to attach these lasers to machines and other steel surfaces instead of drilling holes and bolting them. They hold lasers at a fixed angle, but you can combine them with adjustable angle mounts for 360° rotation.
Dust- and Moisture-Resistant Machine-Mount Aligning Lasers | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Optional Adjustable Angle Mount | Optional Magnetic Mount | ||||||||||||||
Accuracy | Range | Dot Size | Laser Class | Wavelength, nm | Lg. | Dia. | No. of Horizontal Vials | Sensitivity | Batteries Included | Environmental Rating | Each | Each | Each | |||
Red Laser | ||||||||||||||||
±1/8" @ 100 ft. | 100 ft. | 3/8" @ 100 ft. | Class II | 635 | 6 1/2" | 3/4" | 1 | 0.017 in./ft., 5 min./0.1" | Yes | IP67 | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 0000000 |
Green Laser | ||||||||||||||||
±1/8" @ 100 ft. | 500 ft. | 3/8" @ 100 ft. | Class II | 532 | 6 1/2" | 3/4" | 1 | 0.017 in./ft., 5 min./0.1" | Yes | IP67 | 0000000 | 00000000 | 0000000 | 00000 | 0000000 | 000000 |
Dust- and Moisture-Resistant Machine-Mount Aligning Lasers | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Optional Adjustable Angle Mount | Optional Magnetic Mount | ||||||||||||||
Accuracy | Range | Dot Size | Laser Class | Wavelength, nm | Lg. | Dia. | Voltage | Plug Type | Environmental Rating | Cord Lg., ft. | Each | Each | Each | |||
Red Laser | ||||||||||||||||
±1/8" @ 100 ft. | 100 ft. | 3/8" @ 100 ft. | Class IIIa | 635 | 3 1/4" | 3/4" | 120V AC | Two Prong | IP67 | 5 | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 0000000 |
Green Laser | ||||||||||||||||
±1/8" @ 100 ft. | 500 ft. | 3/8" @ 100 ft. | Class IIIa | 532 | 3 1/4" | 3/4" | 120V AC | Two Prong | IP67 | 5 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 |
Includes | Line Size | Set | |
One Dot-to-Line Converter One Size-Converting Lens for 1/16" Dot Size One Size-Converting Lens for 3/32" Dot Size One Size-Converting Lens for 1/8" Dot Size | 2 ft. @ 18 ft. | 000000 | 0000000 |
Chuck-Mount Lasers
Mount these lasers into a chuck on your milling machine or drill press to precisely indicate the drilling point. They project either a red dot or crosshair and are best viewed indoors.
Cross-hair line lasers project two intersecting lines for aligning workpieces on tables. They’re easier to see than a dot.
Optional magnetic holders store lasers when they’re not in use.
Lasers | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | O'all | Magnetic Holders | |||||||||||
For Min. Chuck Capacity | Accuracy | Range | Dot | Line | Laser Class | Wavelength Range, nm | Lg. | Dia. | Batteries Included | Each | Each | ||
Dot | |||||||||||||
1/4" | ±0.001" @ 12" | 1 ft. | 0.002" @ 1", 0.004" @ 12" | __ | Class I | 640-660 | 2 3/4" | 3/4" | Yes | 000000 | 0000000 | 0000000 | 000000 |
Cross-Hair Line | |||||||||||||
1/4" | ±0.001" @ 12" | 1 ft. | __ | 0.002" @ 1", 0.002" @ 12" | Class I | 640-660 | 2 3/4" | 3/4" | Yes | 0000000 | 000000 | 0000000 | 00000 |
Pocket-Sized Pulley Aligning Lasers
Slip this laser into your pocket so it's on hand to align belts, pulleys, chain, and sprockets. Place the tool against the side of your pulley or sprocket and project the laser onto the included target to detect angular or offset misalignment. They mount magnetically, so you don’t need any fasteners to secure them. The surface of the laser is machined, so it sits flush against flat surfaces for easy and precise alignment. They’re powered by a disposable battery, so they’re portable.
Style B lasers have a threaded tip, so they’re compatible with converters that change the shape of the laser, so you can perform a variety of tasks with the same tool.
O'all | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Max. Pulley Spacing | Accuracy | Range | Dot Size | Laser Class | Wavelength, nm | Tolerance per Foot | Lg. | Wd. | Ht. | Magnet Material | Batteries Included | No. of Batteries Required | Battery Size | Each | |
A | 100 ft. | 0.250" @ 100 ft. | 200 ft. | 3/8" @ 100 ft. | Class II | 650 | 0.0025" | 1 3/4" | 5/8" | 1" | Neodymium | No | 4 | 386 | 000000 | 0000000 |
B | 50 ft. | 0.125" @ 100 ft. | 400 ft. | 3/8" @ 100 ft. | Class IIIa | 650 | 0.0013" | 2 1/4" | 5/8" | 1" | Neodymium | No | 4 | 386 | 0000000 | 000000 |
Component | Line Size | Dotted Line Size | Each | |
90° Beam Splitter | __ | __ | 000000000 | 0000000 |
Dot-to-Dotted Line Converter | __ | 2" @ 1 ft. | 000000000 | 000000 |
Dot-to-Line Converter | 8" @ 1 ft. | __ | 000000000 | 00000 |
Dot-to-Line Converter | 6" @ 1 ft. | __ | 000000000 | 00000 |
Dot-to-Line Converter | 28" @ 1 ft. | __ | 000000000 | 00000 |
Dot-to-Line Converter | 16" @ 1 ft. | __ | 000000000 | 00000 |
Pulley Aligning Lasers
Check that your pulley, gear, or sprocket system is properly aligned. These magnetic lasers stick to equipment made of steel. Project the laser beam down your belt or chain and look to see how it hits the target—you can determine angular and offset misalignment at the same time. The target has a machined surface that sits parallel to the contact surface for precise alignment. Adjust your setup until the laser line overlaps with the reference line on the target. These lasers are portable and battery powered, so they’re easy to use in spaces without outlets.
Red lasers are best for indoor environments, since they’re dimmer than green lasers.
Green lasers appear up to 10 times brighter than red lasers, so they’re easier to see outdoors or in bright indoor lighting, as well as from far away.
Lasers with one adjustable target have a single laser line that indicates offset and angular misalignment. A mirror on the target reflects the laser back to the transmitter’s reference line to show misalignment. No need to fuss with the traditional multi-target method.
Lasers with a built-in LED flashlight provide light in dim areas.
For Pulley | O'all | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spacing | Dia. | Accuracy | Range | Line Size | Laser Class | Wavelength, nm | Tolerance per Foot | Lg. | Wd. | Ht. | Container Type | Batteries Included | Includes | Each | |
Red Laser | |||||||||||||||
3"-20 ft. | 3"-36" | 1/16" @ 10 ft. 5/16" @ 50 ft. | 50 ft. | 7 ft. @ 6 ft. | Class II | 635 | -0.002" to 0.002" | 6 3/4" | 5/8" | 1 3/4" | Plastic Case | Yes | One 30-150 lb. Capacity Belt Tension Tester, One 100-300 lb. Capacity Belt Tension Tester, Three Adjustable Targets | 0000000 | 000000000 |
6"-22 ft. | 3"-60" | 1/16" @ 6 ft. | 6 ft. | 2 1/4 ft. @ 6 ft. | Class II | 635 | -0.0125" to 0.0125" | 1 1/4" | 1 1/4" | 8" | Plastic Case | Yes | Built-In LED, One Adjustable Target | 0000000 | 00000000 |
Green Laser | |||||||||||||||
3"-20 ft. | 3"-36" | 1/16" @ 10 ft. 5/16" @ 50 ft. | 50 ft. | 7 ft. @ 6 ft. | Class II | 532 | -0.002" to 0.002" | 6 3/4" | 5/8" | 1 3/4" | Plastic Case | Yes | Three Adjustable Targets | 0000000 | 00000000 |
6"-22 ft. | 3"-60" | 1/16" @ 6 ft. 1/32" @ 15 ft. | 15 ft. | 2 1/4 ft. @ 6 ft. | Class II | 532 | -0.0125" to 0.0125" | 1 1/4" | 1 1/4" | 8" | Plastic Case | Yes | Built-In LED, One Adjustable Target | 0000000 | 00000000 |
Table-Mount Aligning Lasers
Position these lasers directly on a flat surface. Lasers project a red dot that is best viewed indoors. Twist the knob to focus the dot so it is more precise at short distances.
Table-Mount Aligning Lasers | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Mount. Holes | Batteries | Optional Mount | |||||||||||||||
Accuracy | Range | Dot Size | Laser Class | Wavelength, nm | Lg. | Wd. | Ht. | Mounting Fasteners Included | No. of | Dia. | Included | No. Required | Chemistry | Size | Each | Each | ||
1/8" @ 170 ft. | 300 ft. | 1/16" @ 2 ft., 3" @ 300 ft. | Class IIIa | 650 | 4" | 1 1/2" | 1" | No | 4 | 0.201" | No | 1 | Lithium | 3V | 00000000 | 0000000 | 00000000 | 0000000 |
Table-Mount Aligning Lasers | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Mount. Holes | Optional Mount | |||||||||||||||
Accuracy | Range | Dot Size | Laser Class | Wavelength, nm | Lg. | Wd. | Ht. | Mounting Fasteners Included | No. of | Dia. | Voltage | Plug Type | Cord Lg., ft. | Each | Each | ||
1/8" @ 170 ft. | 300 ft. | 1/16" @ 2 ft., 3" @ 300 ft. | Class IIIa | 650 | 4" | 1 1/2" | 1" | No | 4 | 0.201" | 120V AC | Two Prong | 6 | 00000000 | 0000000 | 00000000 | 0000000 |
Automatic Leveling Dot Lasers
Set these lasers on any surface, and they'll level themselves within about 4°. Whether you’re hanging a drop ceiling or aligning bench tops, they project accurate level references to make sure your installation will be at the right height. You can also mount them in a few different ways. They have a threaded insert to attach to a tripod (sold separately). Or use the magnetic base, which is strong enough to hold even on vibrating equipment.
Red lasers are best for indoor environments, since they’re dimmer than green lasers. Green lasers appear up to 10 times brighter than red lasers, making them easier to see outdoors or in bright indoor lighting, as well as from far away.
Lasers with 5 dots help you verify your installation is straight, level, and plumb at the same time. This prevents you from having to reposition the level frequently, so you can work faster.
Lasers with a strap mount can be secures on poles and ladders.
O'all | Mount. Holes | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Dots | Accuracy | Range, ft. | Laser Class | Wavelength Range, nm | Lg. | Wd. | Ht. | Mount Type | No. of | Thread Size | Magnet Material | Batteries Included | Environmental Rating | Container Type | Each | |
Red Laser | ||||||||||||||||
5 | ±1/8" @ 50 ft. | 100 | Class IIIa | 625-645 | 5" | 2" | 5 3/4" | Strap, Screw On, Magnetic Base | 2 | 1/4"-20, 5/8"-11 | Neodymium | Yes | IP54 | Carrying Case | 0000000 | 0000000 |
Green Laser | ||||||||||||||||
3 | ±1/8" @ 30 ft. | 125 | Class II | 500-540 | 4 1/2" | 2" | 4 1/2" | Screw On, Magnetic Base | 1 | 1/4"-20 | Neodymium | Yes | IP65 | Carrying Case | 0000000 | 000000 |
5 | ±1/8" @ 30 ft. | 125 | Class II | 500-540 | 4 1/2" | 2" | 4 1/2" | Screw On, Magnetic Base | 1 | 1/4"-20 | Neodymium | Yes | IP65 | Carrying Case | 0000000 | 000000 |
Ht. | For Mount. Hole Thread Size | Material | Each | |
16"-51" | 1/4"-20 | Aluminum | 0000000 | 000000 |
Cross-Hair Line Automatic Leveling Lasers
Shown with Tripod | Red Laser |
Green Laser |
Project two intersecting lines to ensure equipment is level and plumb. Set these leveling lasers on any surface and they'll level themselves within about 4°. They’re often used to align bench tops in shops and labs.
Red lasers are dimmer than green lasers, so they’re best viewed indoors. Those that include a tripod can be positioned up to 46" high.
Green lasers appear up to 10 times brighter than red lasers, so they can be used from farther distances and in brightly lit areas, including outdoors. Use the included magnetic target to make your laser beam easier to see from a distance.
Lasers with a strap or magnetic base can be affixed to flat surfaces when mounting holes are not available. Add a tripod to adjust the height of these lasers between 16" and 51".
Lasers | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Batteries | Tripods | ||||||||||||||
Range | Accuracy | Laser Class | Wavelength Range, nm | Lg. | Wd. | Ht. | Includes | Mount Type | Included | No. Required | Type | Size | Each | Each | ||
Red Laser | ||||||||||||||||
100 ft. | ±1/4" @ 35 ft. | Class IIIa | 625-645 | 4" | 3 1/2" | 5" | Tripod | Screw On | No | 3 | Disposable | AAA | 0000000 | 0000000 | 000000 | 00 |
200 ft. | ±1/8" @ 35 ft. | Class II | 640-660 | 5 1/4" | 2" | 6" | __ | Screw On, Magnetic Base, Strap | Yes | 4 | Disposable | AA | 0000000 | 000000 | 0000000 | 000000 |
Green Laser | ||||||||||||||||
125 ft. | ±1/8" @ 35 ft. | Class II | 510-530 | 5" | 2 3/4" | 4 1/2" | Magnetic Target | Screw On, Magnetic Base | Yes | 1 | Rechargeable | 3.7V | 0000000 | 000000 | 0000000 | 00000 |
360° Sweeping-Line Automatic Leveling Lasers
Set these lasers on any surface and they’ll level themselves horizontally within about 4°. They emit a beam of light 360° around the base, so you won’t have to keep repositioning them as you move around a space. Use them to align machinery, install conveyors, and check if walls are plumb. Visual and audible alarms alert you when the laser is beyond its leveling range. Adjust their vertical position manually. Mount these lasers to a tripod (not included) to level at a greater range of heights.
Red lasers are best viewed indoors. They include a laser detector, which indicates the height of the laser’s beam when you can’t see it, such as in bright lighting or at long distances.
Green lasers are four times brighter than red lasers, so you can see the beam outdoors and in bright lighting. They’re also easier to spot from far away. These lasers include a magnetic target, which you can mount at the height you need to reflect the beam, making it brighter and easier to see from a distance.
O'all | Mount. Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Accuracy | Range | Line Size | Laser Class | Wavelength Range, nm | Number of Rotational Speeds | Lg. | Wd. | Ht. | Mounting Fasteners Included | No. of | Thread Size | Batteries Included | Each | |
Red Laser | ||||||||||||||
±1/8" @ 50 ft. | 200 ft. | 1/8" @ 100 ft. | Class IIIa | 625-645 | 3 | 6 3/4" | 5" | 6 5/8" | No | 2 | 5/8"-11 | Yes | 00000000 | 0000000 |
Green Laser | ||||||||||||||
±3/16" @ 100 ft. | 400 ft. | 3/8" @ 100 ft. | Class IIIa | 510-530 | 4 | 7 1/8" | 6 3/8" | 8" | No | 2 | 5/8"-11 | Yes | 00000000 | 00000000 |
Adjustable Dot-to-Line Leveling Lasers
Twist the head to switch between a dot, a horizontal line, or a vertical line. These lasers project accurate level references onto walls, ceilings, and equipment. The laser is red and is best viewed indoors.
When a single point of reference is enough, use a dot. Lines give you an extended reference, so you can level several objects without moving the laser. For stability, mount these lasers to a tripod (sold separately), or attach the magnetic base to a metal surface.
Lasers with straps can also be secured to nonmagnetic surfaces.
Size | O'all | No. of Vials | Mount. Holes | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Accuracy | Range | Dot | Line | Laser Class | Wavelength Range, nm | Lg. | Wd. | Ht. | Horizontal | Vertical | 45° | Cross Check | Sensitivity | Mount Type | No. of | Thread Size | Magnet Material | Batteries Included | Each | |
±1/8" @ 50 ft. | 100 ft. | 1/4" @ 50 ft. | 1/4" @ 50 ft. | Class IIIa | 640-660 | 7 3/8" | 1" | 2" | 1 | 1 | __ | 1 | 0.133 in./ft., 38 min./0.1" | Screw On, Magnetic Base, Straps | 1 | 1/4"-20 | Neodymium | Yes | 000000 | 0000000 |
±1/8" @ 50 ft. | 100 ft. | 5/16" @ 50 ft. | 3/8" @ 50 ft. | Class IIIa | 640-660 | 8" | 1 1/4" | 3 1/2" | 1 | 1 | 1 | 1 | 0.126 in./ft., 36 min./0.1" | Screw On, Magnetic Base | 1 | 1/4"-20 | Neodymium | Yes | 0000000 | 00000 |
For Mount. Hole Thread Size | Ht. | Material | Each | |
1/4"-20 | 16"-51" | Aluminum | 0000000 | 000000 |
Multiple Dot Leveling Lasers
Project accurate level references onto walls and ceilings to hang light fixtures or install pipe. These lasers have four vials to verify the level, plumb, and square reference points are accurate. Because they’re red, the lasers are best viewed indoors. They have a screw-on mount to secure to a tripod, or you can use the magnetic base to stick them to equipment for quick checks. A V-groove on the body creates stability on curved surfaces, such as pipe or conduit. They’re powered by disposable batteries, so they’re portable and easy to use when you’re not near an outlet.
O'all | No. of Vials | Mount. Holes | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Accuracy | Range | Dot Size | Laser Class | Wavelength Range, nm | Lg. | Wd. | Ht. | Horizontal | Vertical | 45° | Cross Check | Sensitivity | Mount Type | No. of | Thread Size | Batteries Included | Container Type | Each | |
±1/8" @ 50 ft. | 100 ft. | 1/4" @ 50 ft. | Class IIIa | 640-660 | 9 1/2" | 1" | 2 1/4" | 1 | 1 | 1 | 1 | 0.133 in./ft., 38 min./0.1" | Screw On, Magnetic Base | 1 | 1/4"-20 | Yes | Pouch | 000000 | 0000000 |
Long-Distance Leveling Laser Kits
These kits include a laser, a beam splitter, and a leveling plate. Mark a dot up to 1,000 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems. A single laser dot gives you a simple way to check that your installation is level. These levels are compact, portable, and have a long battery life. You can mount them to rotating equipment without worrying about power cords. The beam splitter converts one dot into two dots that are set at a 90° angle. Use the leveling plate to steady lasers on uneven surfaces or to mount them to a tripod. These plates have three adjustable legs that stabilize the laser.
Red lasers are best used indoors, since they’re dimmer than green lasers. Green lasers appear up to 20 times brighter than red lasers, so they’re visible outdoors and in bright lighting. They’re also easy to see from far away.
Dot-to-line converters change the dot into a vertical or horizontal line.
Long-Distance Leveling Laser Kits | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | No. of Vials | Mount. Holes | Replacement Leveling Plate | ||||||||||||
Accuracy | Range | Laser Class | Wavelength, nm | Lg. | Wd. | Ht. | Horizontal | Vertical | No. of | Thread Size | Batteries Included | Each | Each | ||
Red Laser | |||||||||||||||
±1/8" @ 100 ft. | 1,000 ft. | Class IIIa | 635 | 9 1/2" | 1" | 1 1/8" | 1 | 2 | 1 | 1/4"-20 | Yes | 00000000 | 000000000 | 00000000 | 0000000 |
Green Laser | |||||||||||||||
±1/8" @ 100 ft. | 1,000 ft. | Class IIIa | 520 | 9 1/2" | 1" | 1 1/8" | 1 | 2 | 1 | 1/4"-20 | Yes | 00000000 | 00000000 | 00000000 | 000000 |
Magnetic-Base Long-Distance Leveling Lasers
Stick these levels to most metal surfaces to mark a dot up to 500 feet across your plant. They’re often used for long range applications, such as laying out conveyors and aligning ventilation systems. The single laser dot gives you a simple check that your installation is level against one reference point. These levels are compact, portable, and have a long battery life. Mount them to rotating equipment without worrying about power cords.
Red lasers are dimmer than green lasers, so they’re best viewed indoors. Green lasers appear up to 10 times brighter than red lasers, so they remain visible from farther distances and in brightly lit areas, including outdoors.
Use a leveling plate for mounting the laser to a tripod, or placing it on a surface. The plate has three adjustable legs to level the laser.
90° beam splitters convert one dot into two dots set at a 90° angle.
Dot-to-line converters change the dot into a vertical or horizontal line.
Magnetic-Base Long-Distance Leveling Lasers | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | No. of Vials | Leveling Plate | ||||||||||||||
Laser Color | Accuracy | Range | Laser Class | Wavelength, nm | Lg. | Wd. | Ht. | Horizontal | Vertical | 45° | Sensitivity | Batteries Included | Each | Each | ||
Red | ±1/8" @ 100 ft. | 500 ft. | Class IIIa | 635 | 6 1/2" | 5/8" | 1 3/8" | 1 | 1 | 1 | 0.017 in./ft., 5 min./0.1" | Yes | 00000000 | 0000000 | 00000000 | 0000000 |
Green | ±1/8" @ 100 ft. | 500 ft. | Class IIIa | 532 | 6 1/2" | 5/8" | 1 3/8" | 1 | 1 | 1 | 0.017 in./ft., 5 min./0.1" | Yes | 00000000 | 000000 | 00000000 | 000000 |
Long-Distance Leveling Lasers
Mark a dot up to 100 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems. The single laser gives you a simple reference point to check that your installation is level. These levels are compact, portable, and have a long battery life.
Red lasers are best used indoors, since they’re dimmer than green lasers. Green lasers appear up to 20 times brighter than red lasers, so they’re visible outdoors and in bright lighting. They’re also easy to see from far away.
Add a leveling plate to steady lasers on uneven surfaces or to mount them to a tripod. These plates have three adjustable legs that stabilize the laser.
90° beam splitters convert one dot into two dots set at a 90° angle.
Dot-to-line converters change the dot into a vertical or horizontal line.
Long-Distance Leveling Lasers | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | No. of Vials | Mount. Holes | Leveling Plate | |||||||||||||
Accuracy | Range | Laser Class | Wavelength, nm | Lg. | Wd. | Ht. | Horizontal | Vertical | Sensitivity | No. of | Thread Size | Batteries Included | Each | Each | ||
Red Laser | ||||||||||||||||
±1/8" @ 100 ft. | 100 ft. | Class IIIa | 635 | 9 1/2" | 1" | 1 1/8" | 1 | 2 | 0.105 in./ft., 30 min./0.1" | 1 | 1/4"-20 | Yes | 00000000 | 0000000 | 00000000 | 0000000 |
Green Laser | ||||||||||||||||
±1/8" @ 100 ft. | 100 ft. | Class IIIa | 520 | 9 1/2" | 1" | 1 1/8" | 1 | 2 | 0.0017 in./ft., 5 min./0.1" | 1 | 1/4"-20 | Yes | 00000000 | 00000000 | 00000000 | 000000 |
Dot-to-Line Converter | 00000000 | Each | 0000000 |
Long-Distance Leveling Laser Kit with Red Laser (Includes 90° Beam Splitter and Leveling Plate) | 00000000 | Each | 00000000 |
90° Beam Splitter | 00000000 | Each | 000000 |
Long-Distance Leveling Laser Kit with Green Laser (Includes 90° Beam Splitter and Leveling Plate) | 00000000 | Each | 00000000 |
Laser Directing Components
Direct laser beams where you need them with components that turn or split your beam. They work with any dot laser.
Mirror requires a holder to mount to a standoff.
90° turning mirror screws into a standoff.
90° beam splitter converts a single dot into two dots; one continues in a straight line, the other projects at a 90° angle. The splitter screws into a standoff.
Dot-to-line converter requires a holder to mount to a standoff.
Standoffs have 8-32 male threads on one end and 1/4"-20 female threads on the other. Diameter is 1/2". For additional lengths, see 18-8 Stainless Steel Standoffs.
for Mirror and
Beam Converters
Holder for Mirror
and Beam Converters
Component | Max. Tilt Angle | Max. Rotation Angle | Each | |
Mirror | __ | __ | 0000000 | 000000 |
90° Turning Mirror | __ | __ | 0000000 | 000000 |
90° Beam Splitter | __ | __ | 0000000 | 000000 |
Dot-to-Line Converter | __ | __ | 0000000 | 000000 |
Fixed Holder for Mirror and Beam Converters | __ | __ | 0000000 | 00000 |
Adjustable-Angle Holder for Mirror and Beam Converters | 4° | __ | 0000000 | 00000 |
Magnetic Mount | __ | __ | 0000000 | 00000 |
Adjustable-Angle Mount | __ | 180° | 0000000 | 000000 |
Laser Pointers
Pointer with ball point pen, stylus, and LED flashlight can switch between being used as a pointer, stylus, or writing utensil with a twist of the body. Push a button to activate LED flashlight.
Range (Laser Shape) | Features | Batteries Included | Each | |
Red Laser | ||||
---|---|---|---|---|
1,500 ft. (Dot) | Ball Point Pen, Stylus, LED Flashlight | Yes | 0000000 | 000000 |
1,500 ft. (Dot) | __ | Yes | 0000000 | 00000 |
1,500 ft. (Dot), 300 ft. (Arrow), 45 ft. (Underline) | __ | Yes | 0000000 | 00000 |
3,000 ft. (Dot) | __ | Yes | 0000000 | 00000 |
Green Laser | ||||
6,000 ft. (Dot) | __ | Yes | 0000000 | 00000 |
Extendable Pointers
These telescoping pointers extend to over two feet long and contract to easily fit in your pocket.
Lg. | Each | |
5"-24 1/2" | 0000000 | 000000 |
Laser Squares
Lay out machine tables and work stations at precise right angles. This laser generates two red lines that form a 90° angle. The laser lines are best viewed indoors.
O'all | No. of Vials | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Accuracy | Range | Line Size | Laser Class | Lg. | Wd. | Ht. | Horizontal | Vertical | Sensitivity | Batteries Included | Features | Each | |
±1/4" @ 20 ft. | 23 ft. | 0.1" @ 20 ft. | Class II | 6 1/2" | 6 1/2" | 2" | 1 | 1 | 0.004 in./ft., 1 min./0.1" | Yes | Built-In Protractor | 0000000 | 000000 |
Digital Angle Indicators with Laser
Align guide rails or lay pipe at specific angles from a flat surface. The laser light is red and is best viewed indoors. The display shows the precise angle of the beam and rotates for overhead measurements. The audible level indicator tells you when the tool is level and plumb.
Laser | O'all | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Angle Measuring Range | Accuracy | No. of Measuring Quadrants | Quadrant Angle Measuring Range | Accuracy | Range | Dot Size | Lg. | Wd. | Ht. | Mount Type | Batteries Included | Features | Each | |
0°-360° | ±0.2° | 4 | 0°-90° | ±1/8" @ 50 ft. | 0-200 ft. | 1/4" @ 50 ft. | 10 1/2" | 1 1/4" | 2 1/4" | Screw On, Magnetic Base | Yes | Audible Level Indicator, Backlit Display | 0000000 | 0000000 |