Connection Type Connection Type |
|---|
|
|
Shape Shape |
|---|
 | Straight |
 | Double Wye |
 | Wye |
Heat-Shrink Tubing Type Heat-Shrink Tubing Type |
|---|
 |  |
| Splitters | Crossover Tubing |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Flexibility Flexibility |
|---|
|
ID Before Shrinking ID Before Shrinking |
|---|
|
Minimum ID After Shrinking Minimum ID After Shrinking |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Industry Designation for Cable Insulation
More
About Heat-Shrink Tubing
More
About Extension Cords
More
About Safety Ratings for Electrical Testing
More
Line Splitters for Clamp-On Multimeters
Determine how much current a device with a two- or three-wire power cord uses without pulling apart the wires. The splitter isolates hot and neutral wires so you can measure AC current in either wire with a clamp-on multimeter.
| Max. AC Current, A | For No. of Wires | Safety Rating | Specifications Met | Each | |
| 15 | 2, 3 | CAT II, 600V | UL Listed, C-UL Listed | 0000000 | 000000 |
Telephone Jack Splitters
Allow more than one phone line to connect to a single telephone jack.
Each | Package | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Telephone Connection Type | Ethernet Connection Type | For No. of Wires | No. of Inlets (Gender) | Application | Color | Each | Pkg. Qty. | Pkg. | ||
| RJ11 | __ | 4 | 1 (Male) | Signal | Ivory | 0000000 | 00000 | 5 | 0000000 | 000000 |
| RJ12/RJ25 | __ | 6 | 1 (Male) | Signal, Data | Ivory | 000000 | 00 | 5 | 00000000 | 00000 |
| RJ45 | RJ45 | 8 | 1 (Male) | Signal, Data | White | 000000 | 00 | 3 | 0000000 | 00000 |
Each | ||||||
|---|---|---|---|---|---|---|
| Telephone Connection Type | For No. of Wires | No. of Inlets (Gender) | Application | Color | Each | |
| RJ11 | 4 | 1 (Male) | Signal | Ivory | 0000000 | 00000 |
Extension Cord Splitters
Power multiple devices from the same outlet with these splitters.
Five-outlet splitters plug into the end of an extension cord.
STW splitters have a water-resistant insulation.
STOW splitters have an oil- and water-resistant insulation.
For technical drawings and 3-D models, click on a part number.
Cord | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Wire Ga. | Current, A | Voltage | Power-Indicating Light | OD | Insulation Material | Industry Designation | Specifications Met | Color | Each | |
NEMA 5-15 Plug × NEMA 5-15 Socket | |||||||||||
| 2 | 12 | 15 | 125V AC | Without Power-Indicating Light | 0.56" | Rubber | STW | UL Listed | Yellow | 0000000 | 000000 |
NEMA 5-20 Plug × NEMA 5-20 Socket | |||||||||||
| 25 | 12 | 20 | 125V AC | Without Power-Indicating Light | 0.56" | Rubber | STOW | UL Listed | Yellow | 0000000 | 000000 |
NEMA L5-20 Plug × NEMA L5-20 Socket | |||||||||||
| 1 1/2 | 12 | 20 | 125V AC | Without Power-Indicating Light | 0.56" | Rubber | STW | UL Listed | Yellow | 0000000 | 00000 |
NEMA L14-30 Plug × NEMA 5-20 Socket | |||||||||||
| 3 | 10 | 30 | 125V AC/250V AC | Without Power-Indicating Light | 0.75" | Rubber | STOW | __ | Yellow | 0000000 | 00000 |
Cord | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Wire Ga. | Current, A | Voltage | Power-Indicating Light | OD | Insulation Material | Industry Designation | Specifications Met | Color | Each | |
NEMA 5-15 Plug × NEMA 5-15 Socket | |||||||||||
| 2 | 12 | 15 | 125V AC | Without Power-Indicating Light | 0.56" | Rubber | STW | UL Listed | Yellow | 0000000 | 000000 |
NEMA L5-20 Plug × NEMA L5-20 Socket | |||||||||||
| 1 1/2 | 12 | 20 | 125V AC | Without Power-Indicating Light | 0.56" | Rubber | STW | UL Listed | Yellow | 0000000 | 00000 |
NEMA L5-30 Plug × NEMA 5-20 Socket | |||||||||||
| 2 | 12 | 30 | 125V AC | Without Power-Indicating Light | 0.56" | Rubber | STOW | __ | Yellow | 0000000 | 00000 |
| Ht. | Wd. | Dp. | Current, A | Voltage | Protection Type | Power-Indicating Light | Specifications Met | Color | Each | |
NEMA 5-15 Plug × NEMA 5-15 Socket | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 3" | 6 5/8" | 9" | 15 | 125V AC | Circuit Breaker | Without Power-Indicating Light | UL Listed | Yellow | 000000 | 000000 |
Video Monitor Splitters
These cords have HD15 connectors to transmit video from one source on two different monitors. Shielding blocks signal interference from nearby equipment and devices.
| Lg., ft. | For Video Resolution | Shield Type | Color | Each | |
HD15 Plug × HD15 Socket | |||||
|---|---|---|---|---|---|
| 1 | 1600 × 1200 | Braid, Foil | Gray | 0000000 | 000000 |
Nano M8 Cord Splitters
Connect two devices to a distribution block or I/O module with just one cord. Often used with sensors and actuators, these splitters send power/signals to your devices through a single connection. Rated IP65, IP66K, and IP67 when mated, all stand up to dust, high-pressure washdowns, and brief submersion.
For technical drawings and 3-D models, click on a part number.
Number of Poles | Cord | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Plug | Sockets | Number of Keyways | Face Diameter | Length, ft. | Current, A | Voltage | Housing Thread Size | Wire Gauge | OD | Insulation Material | Temperature Range, °F | Environmental Rating | Color | Each | |
Male Plug (External Thread) × Female Sockets (Internal Thread) | |||||||||||||||
A-Coded—Unshielded | |||||||||||||||
| 3 | 3 | 0 | 0.2" | 1 | 4 | 50V AC/60V DC | M8 | 24 | 0.17" | PVC Plastic | -10° to 185° | IP65, IP66K, IP67 | Yellow | 0000000 | 000000 |
| 4 | 3 | 0 | 0.2" | 1 | 4 | 50V AC/60V DC | M8 | 24 | 0.17" | PVC Plastic | -10° to 185° | IP65, IP66K, IP67 | Yellow | 0000000 | 00000 |
| 4 | 4 | 0 | 0.2" | 1 | 4 | 50V AC/60V DC | M8 | 24 | 0.18" | PVC Plastic | -10° to 185° | IP65, IP66K, IP67 | Yellow | 0000000 | 00000 |
Electronic Equipment Cord Splitters
Power multiple devices from one power source. Use these splitters with computers, lab equipment, and office machines that have IEC connections.
Use SJT cords in dry or damp locations.
SVT cords are ultra-flexible and as pliable as vacuum cleaner cords. They withstand repeated winding.
Cord | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wire Gauge | Current, A | Voltage | Lg., ft. | OD | Insulation Material | Industry Designation | Temp. Range, °F | Specifications Met | Color | Each | |
| 18 | 10 | 125V AC | 7 | 0.11" | PVC Plastic | SJT | -40° to 140° | UL Recognized Component, C-UL Recognized Component, IEC 60320 | Black | 000000 | 000000 |
| 18 | 10 | 125V AC | 7 | 0.11" | PVC Plastic | SVT | -40° to 140° | UL Recognized Component, C-UL Recognized Component, IEC 60320 | Black | 000000 | 00000 |
Cord | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wire Gauge | Current, A | Voltage | Lg., ft. | OD | Insulation Material | Industry Designation | Temp. Range, °F | Specifications Met | Color | Each | |
| 18 | 10 | 250V AC | 6 | 0.11" | PVC Plastic | SJT | -40° to 220° | UL Recognized Component, C-UL Recognized Component, IEC 60320 | Black | 000000 | 000000 |
| 18 | 10 | 250V AC | 6 | 0.11" | PVC Plastic | SVT | -40° to 220° | UL Recognized Component, C-UL Recognized Component, IEC 60320 | Black | 000000 | 00000 |
Nano M8/Micro M12 Splitters
Join two devices with M8 connectors to a single cord, distribution block, or I/O module with M12 connectors to save space and reduce the number of cords in industrial automation setups. Often used with sensors and switches, these splitters send or receive two signals through one connection. Rated IP65 and IP67, they’ll stand up to dust, low-pressure washdowns, and brief submersion.
Note: M12 plugs have an extra pin on the face that is not used.
For technical drawings and 3-D models, click on a part number.
Plug | Sockets | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Housing Thread Size | No. of Poles | No. of Keyways | Face Dia. | Housing Thread Size | No. of Poles | No. of Keyways | Face Dia. | Coding | Voltage | Current, A | Housing Material | Color | Temp. Range, °F | Specifications Met | Each | |
Screw-Together Male Plug (Metric External Threads) × Screw-Together Female Sockets (Metric Internal Threads) | ||||||||||||||||
| M12 × 1mm | 4 | 0 | 0.3" | M8 × 1mm | 3 | 0 | 0.2" | A | 60V AC/60V DC | 4 | Polyurethane Rubber | Black | -10° to 185° | UL Listed, C-UL Listed | 0000000 | 000000 |
Nano M8 Splitters
Reduce the number of cords needed to send and receive signals where space is tight. These splitters connect two sensors, switches, and devices to a single cord or port in a distribution block or I/O module.
IP67 rated when connected, they seal out dust and water if briefly submersed.
For technical drawings and 3-D models, click on a part number.
Plug | Sockets | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Housing Thread Size | No. of Poles | Housing Thread Size | No. of Poles | Face Diameter | Coding | Voltage | Current, A | Housing Material | Color | Temp. Range, °F | Environmental Rating | Specifications Met | Each | |
Screw-Together Male Plug (Metric External Threads) × Screw-Together Female Sockets (Metric Internal Threads) | ||||||||||||||
| M8 × 1 mm | 3 | M8 × 1 mm | 3 | 0.2" | A | 30V AC/30V DC | 4 | Polyurethane Rubber | Black | -10° to 185° | IP67 | UL Listed, C-UL Listed | 0000000 | 000000 |
| M8 × 1 mm | 4 | M8 × 1 mm | 3 | 0.2" | A | 30V AC/30V DC | 4 | Polyurethane Rubber | Black | -10° to 185° | IP67 | UL Listed, C-UL Listed | 0000000 | 00000 |
Heat-Shrink Cable Splitters
- Material: Polyolefin Plastic
- Shrink Ratio: See Table
- Shrink Temperature: 250° F
- Temperature Range: See Table
Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable. An adhesive lining melts when the splitter is heated and bonds to the underlying surface, creating a water-resistant seal.
Splitters for round cable are often used with armored cable, sheathed cable, and conduit ends.
ID | Split End ID | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Number of Wires | Before Shrinking | Min. After Shrinking | Before Shrinking | After Shrinking | Min. Wall Thick. After Shrinking | Min. Lg. After Shrinking | Shrink Ratio | Flexibility | For Cable Shape | Temp. Range, °F | Color | Each | ||
| A | 2 | 0.8" | 0.37" | 0.33" | 0.11" | 0.06" | 2.7" | 2:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 000000 |
| A | 2 | 1.2" | 0.6" | 0.5" | 0.17" | 0.08" | 3.5" | 2:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| A | 2 | 1.9" | 0.9" | 0.75" | 0.3" | 0.12" | 4.2" | 2:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| A | 2 | 3" | 1.5" | 1.45" | 0.5" | 0.12" | 5" | 2:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| B | 3 | 0.9" | 0.36" | 0.33" | 0.12" | 0.1" | 2.7" | 2.5:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| B | 3 | 1.2" | 0.5" | 0.5" | 0.16" | 0.1" | 3.3" | 2.5:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| B | 3 | 1.5" | 0.69" | 0.65" | 0.18" | 0.9" | 4" | 2:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| B | 3 | 2.4" | 1.4" | 1.25" | 0.5" | 0.15" | 5.1" | 1.5:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| C | 4 | 0.9" | 0.43" | 0.28" | 0.11" | 0.05" | 2.7" | 2:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| C | 4 | 1.25" | 0.8" | 0.5" | 0.19" | 0.09" | 3.3" | 1.5:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| C | 4 | 1.75" | 0.98" | 0.79" | 0.28" | 0.15" | 3.5" | 1.8:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| C | 4 | 2.35" | 1" | 1" | 0.35" | 0.15" | 8.5" | 2.4:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| C | 4 | 2.65" | 1.4" | 1.2" | 0.53" | 0.15" | 5" | 1.9:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 00000 |
| C | 4 | 5.25" | 3" | 1.35" | 0.55" | 0.14" | 9" | 1.6:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 000000 |
| D | 5 | 2.36" | 0.96" | 1.18" | 0.29" | 0.14" | 7.1" | 2.5:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 000000 |
| E | 6 | 2.39" | 1.45" | 0.8" | 0.35" | 0.1" | 5.4" | 1.6:1 | Rigid | Round | -65° to 230° | Black | 00000000 | 000000 |
| F | 2 | 1" | 0.26" | 0.55" | 0.16" | 0.06" | 2.9" | 3.8:1 | Flexible | Round | -65° to 275° | Black | 00000000 | 00000 |
| F | 2 | 1" | 0.26" | 0.55" | 0.26" | 0.06" | 2.9" | 3.8:1 | Flexible | Round | -65° to 275° | Black | 00000000 | 00000 |
| F | 2 | 1.3" | 0.26" | 0.75" | 0.26" | 0.6" | 2.9" | 5:1 | Flexible | Round | -65° to 275° | Black | 00000000 | 00000 |
| F | 2 | 1.6" | 0.45" | 0.9" | 0.45" | 0.5" | 4.3" | 3.6:1 | Flexible | Round | -65° to 275° | Black | 00000000 | 00000 |
| G | 3 | __ | __ | 0.62" | 0.11" | 0.06" | 4.4" | 5.7:1 | Flexible | Flat | -65° to 275° | Black | 00000000 | 00000 |
| H | 4 | __ | __ | 0.4" | 0.1" | 0.06" | 4.4" | 4:1 | Flexible | Flat | -65° to 275° | Gray | 00000000 | 00000 |
| H | 4 | __ | __ | 0.62" | 0.11" | 0.06" | 4.4" | 5.7:1 | Flexible | Flat | -65° to 275° | Black | 00000000 | 00000 |
Wye-Shaped On/Off Valves with Garden Hose Threads
Convert one faucet into two, four, or five convenient outlets. Each outlet has individually operated shutoff valves.
Plastic valves are lighter than brass or zinc valves, and are durable enough to hold up to impacts and abrasion. They have good corrosion resistance.
Zinc valves have good corrosion resistance. Some also have a TPR rubber or plastic coating to protect your hands—the coating keeps valves from getting hot in the sun or cold in the winter.
Brass valves are softer than zinc and plastic, so they’re easier to thread together. They’re also corrosion resistant.
Valves with flexible outlets are easy to install and help keep your hose from kinking.
For technical drawings and 3-D models, click on a part number.
| No. of Outlets | Max. Pressure | Temp. Range, °F | Includes | Each | |
Plastic | |||||
|---|---|---|---|---|---|
| 2 | 60 psi @ 100° F | 35° to 100° | Washers | 0000000 | 00000 |
| 4 | 60 psi @ 100° F | 35° to 100° | Washers | 0000000 | 00000 |
Zinc | |||||
| 2 | 60 psi @ 100° F | 35° to 100° | Washers | 0000000 | 0000 |
| 4 | 60 psi @ 100° F | 35° to 100° | Washers | 0000000 | 00000 |
Zinc with TPR Rubber Coating | |||||
| 2 | 60 psi @ 100° F | 35° to 100° | Washers | 0000000 | 0000 |
| 2 | 60 psi @ 100° F | 35° to 100° | Washers, Flexible Hose Outlets | 0000000 | 00000 |
| 4 | 60 psi @ 100° F | 35° to 100° | Washers, Support Brace | 0000000 | 00000 |
Zinc with Plastic Coating | |||||
| 5 | 60 psi @ 100° F | 35° to 100° | Washers, Support Brace, Mounting Hardware | 0000000 | 00000 |
Brass | |||||
| 2 | 60 psi @ 100° F | 35° to 100° | Washers | 0000000 | 00000 |
| 4 | 60 psi @ 100° F | 35° to 100° | Washers | 0000000 | 00000 |
Crossover Heat-Shrink Tubing
- Material: Polyolefin Plastic
- Shrink Ratio: 3.1:1
- Dielectric Strength: 200 V/mil
- Shrink Temperature: 250° F
- Temperature Range: -65° to 275° F
Organize and route wire and cable in an enclosure—this tubing bundles wires together while allowing them to reach different connection points. An adhesive lining melts when the tubing is heated and bonds to the underlying surface, creating a water-resistant seal. It also resists abrasion.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
ID | 2 1/2" Lg. | |||||
|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | No. of Joined Tubes | Color | Each | |
| 1" | 0.32" | 0.07" | 2 | Black | 0000000 | 000000 |