A floating bearing in these self-aligning carriages adjusts to compensate for misalignment between rails, so your carriages still move in tandem.

Create a self-aligning system that can be locked in place with these carriages and guide rails.

For applications with low clearance, these carriages protrude less than 5 mm above their rails.

With a wide base, these sleeve bearing carriages stabilize moment (twisting) and off-center loads better than standard carriages. Use in areas where multiple carriages or rails won't fit.

Build loops, circuits, and curved paths in assembly stations and other repetitive processes.

Mate with a T-slotted rail to add linear motion to your assembly.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.

Run many cycles in tight spaces before replacing or re-greasing carriages.

These tiny carriages and guide rails are sized for electronic and other precision applications.

For smooth, accurate movement around curves and loops, these carriages have ball bearings that work well in high-speed, high-load applications.

A handle on the side of the carriage locks the carriage in place.

Nylon rollers provide low-friction movement for light loads and corrosive environments.

Mount along a wall or other vertical surface.

Use these carriages and guide rails for light loads where precise movement is not required.

Create a low-maintenance system with loops and curved paths in assembly stations and other repetitive processes.

With a row of crossed-roller bearings on each side of the rail, these slides have over twice the load capacity of standard low-friction slides and are better for handling shock loads.

A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".

Three micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

A thumb screw locks the slide to prevent movement in systems where vibration is present.

Build your own system for hanging doors and curtains in marine environments. The track is anodized aluminum and the hangers are 316 stainless steel for corrosion resistance. Combine track, hangers, joints, and accessories for a complete system.

Narrow track allows you to hang doors in tight spaces.

Stop hanging doors from swaying. These tracks and guides (both sold separately) give your door a path to run along the floor for smooth, stable motion.

Guide overhead doors along a fixed path for smooth and steady travel. Often used to support garage doors, this track is made of galvanized steel to resist corrosion in wet and rainy areas.

With PTFE sleeve bearings and a low-friction ball screw, these slides don’t require the mess and maintenance of lubrication but still give you precise positioning anywhere along the length of their stroke.

Prevent dust from circulating while precisely positioning parts for drilling, fastening, assembly, and measuring.

Precisely position parts in conditions as cold as -90° F.

A built-in stepper motor moves the load on these slides smoothly and precisely at high speeds, similar to an inkjet printer head.