Choose the ID, OD, and length you need.

Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.

These bushings are made of stainless steel, which provides excellent corrosion resistance.

The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.

Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.

Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves.

The serrations grip to prevent rotation and spin out. Press or encase into plastic tooling.

Insert these bushings into a drilled hole and twist the lock ring to secure. Reusable and easy to replace, they are held in in place by a separate locking part.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. They’re sleeve bearings, so they handle loads parallel to the shaft.

The oil in these bearings is suitable for incidental contact with food.

Use where high loads and speeds are not required.

Good for underwater applications, these bearings won’t swell or warp when wet.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

Even in the presence of harsh chemicals and extreme temperatures, these bearings operate under heavy loads and at high speeds.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

Good for underwater applications, these bearings won’t swell or warp when wet.

Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

The oil in these bearings is suitable for incidental contact with food.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

These bearings stand up to a wider range of chemicals than other dry-running thrust bearings.

A metal backing adds strength.

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.

Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.

Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.

A reliable classic—these babbitt bearings are strong and corrosion resistant.

A mounting flange prevents movement during tightening, so it's easy to center these bushings in your sprocket.

A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit.

The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings.

The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys.

A flexible tire on these couplings safeguards components on your shafts by reducing vibration and shock.

Easier to install than grommets, push these bushings through your mounting hole to dampen vibration. Use them with a vibration-damping washer to isolate vibration.

Ribbed bushings are more flexible than our smooth vibration-damping bushings, so they're easier to install.