McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    2 Products

    Bench-Top Liquid Chillers

    Image of Product. Front orientation. Liquid Chillers. Bench-Top Liquid Chillers.
    Send cool water to equipment right from your bench top without compromising precision. These chillers maintain constant, uniform temperatures within 0.2° F where other chillers only keep liquid cool within a few full degrees. This makes them ideal for equipment where small temperature changes could cause an issue, such as microscope cooling plates.
    Fill these chillers with water or glycol solutions, and an internal pump moves the liquid through a cooling system and out to your equipment. Use the built-in keypad to manually set the temperature, or connect an external controller of your own to automate temperature changes. View the set temperature, alerts, and other information from the LED display.
    500 BTU/hr Cooling Capacity—Chillers rated for 500 Btu/hr. are also known as Peltier chillers. They cool liquid using electricity—no need for compressors or refrigerants. Because they don’t use a compressor, you’ll hardly hear them when they’re on. To check fluid levels at a glance, their tank inlet is semi-clear.
    Overall
    Cooling Cap.,
    BTU/hr
    Wire
    Connection
    Voltage (Electrical
    Phase)
    Current,
    amp
    Compressor
    Power, hp
    Max. Flow Rate
    @ Pressure
    Max. Pressure,
    psi
    Temp. Control
    Range, ° F
    Ht.
    Wd.
    Dp.
    Accuracy
    Tank Cap.,
    fl. oz.
    Refrigerant
    No.
    Features
    Each
    For Closed-Loop Fluid Cooling Systems
     
    Thermoelectric Cooled
    500Wire Leads24V DC12.51 gpm @ 10 psi2050 to 1409 1/16"5 1/8"6 5/16"±0.4%4Semi-Clear Tank Inlet0000000000000000
     
    Refrigerant Cooled
    3,400120V AC (Single Phase)3.31/66 gpm @ 16 psi160 to 8018 7/16"9 1/8"18 3/16"±1.8%51R-134AUV Light System000000000000000
     
    back to top