Motorized Roller Conveyors
Also known as line-shaft conveyors, these are driven by a drive shaft and round belts. The drive shaft continues to run even when the accumulation of packages may cause some rollers to stop turning. Conveyors can be hardwired for material flow in either direction. Only straight conveyor sections contain a motor and can power up to 60 ft. of conveyor extensions on either side.
90° curved conveyor extensions have tapered rollers that keep packages centered.
Note: Capacities are based on an evenly distributed load. Use a stand at each end for straight conveyors and extensions. Add an additional stand in the center to increase capacity. For 90° curved conveyor extensions, use a stand at each end plus a stand in the center. Connected conveyor sections share a stand. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.


Wd. | Roller | Ht. | No. of Stands | 3 ft. Lg. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Between Frame | Spacing | Projection | Frame | O'all | Voltage | Motor Phase | Power, hp | Speed, fpm | Cap., lbs./ft. | Required | Included | Features | Each | |
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||||||||
16" | 13" | 3" | 1/4" | 5 1/2" | 36"-48" | 240V AC/460V AC | Three | 1/2 | 60 | 60 | 2 | 2 | Connecting Plates | 0000000 | 000000000 |
19" | 16" | 3" | 1/4" | 5 1/2" | 36"-48" | 240V AC/460V AC | Three | 1/2 | 60 | 60 | 2 | 2 | Connecting Plates | 0000000 | 00000000 |
25" | 22" | 3" | 1/4" | 5 1/2" | 36"-48" | 240V AC/460V AC | Three | 1/2 | 60 | 60 | 2 | 2 | Connecting Plates | 0000000 | 00000000 |
35" | 32" | 3" | 1/4" | 5 1/2" | 36"-48" | 240V AC/460V AC | Three | 1/2 | 60 | 60 | 2 | 2 | Connecting Plates | 0000000 | 00000000 |


Wd. | Roller | Ht. | |||||||
---|---|---|---|---|---|---|---|---|---|
O'all Wd. | Between Frame | Spacing | Projection | Frame | O'all | Cap., lbs./ft. | Features | Each | |
5 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
16" | 13" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 0000000 |
19" | 16" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 000000 |
25" | 22" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 000000 |
35" | 32" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
7 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
16" | 13" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
19" | 16" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
25" | 22" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
35" | 32" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
10 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
16" | 13" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
19" | 16" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
25" | 22" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
35" | 32" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |



Wd. | Ht. | No. of Stands | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
O'all | Between Frame | Roller Projection | Frame | O'all | Cap., lbs./ft. | Required | Included | Features | Each | |
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | ||||||||||
16" | 13" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 000000000 |
19" | 16" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 00000000 |
25" | 22" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 00000000 |
35" | 32" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 00000000 |

Conveyor Mount. Slot | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht. | Conveyor Mount. Fasteners Included | No. of Conveyor Mount. Holes | Lg. | Wd. | Mount. Hole Ctr.-to-Ctr. | Floor Mount. Fasteners Included | No. of Floor Mount. Holes | Floor Mount. Hole Dia. | Each | |
For 16" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 0000000 |
For 19" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 000000 |
For 25" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 000000 |
For 35" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 000000 |
Spools for Line-Shaft Conveyors





Replace the spools that hold round belts in place on line-shaft conveyors. The larger a spool’s body OD, the faster its transmission speed.
Spools with two-piece construction are easier to install than regular spools. Snap the two halves closed over the shaft.
Keyed spools lock into place and won’t slip on shafts. Often used for curves and inclines.
For technical drawings and 3-D models, click on a part number.
For Keyway | ||||||||
---|---|---|---|---|---|---|---|---|
Body OD | Lg. | For Shaft Dia. | Wd. | Dp. | Material | Color | Each | |
One Piece | ||||||||
For Round Shafts | ||||||||
1 7/32" | 1 1/4" | 1" | __ | __ | Acetal Plastic | Blue | 000000 | 00000 |
1 7/32" | 1 1/4" | 1" | __ | __ | Acetal Plastic | White | 000000 | 0000 |
1 29/32" | 1 5/8" | 1" | __ | __ | Acetal Plastic | White | 000000 | 0000 |
2 19/32" | 1 3/4" | 1" | __ | __ | Acetal Plastic | Blue | 000000 | 0000 |
2 19/32" | 1 3/4" | 1 7/16" | __ | __ | Acetal Plastic | Blue | 000000 | 0000 |
For Keyed Shafts | ||||||||
1 15/16" | 1 1/4" | 1" | 0.25" | 0.125" | Acetal Plastic | Black | 0000000 | 0000 |
Two Piece | ||||||||
For Round Shafts | ||||||||
1 7/32" | 1 1/4" | 1" | __ | __ | Acetal Plastic | Red | 000000 | 0000 |
1 11/16" | 1 5/8" | 1" | __ | __ | Acetal Plastic | Green | 000000 | 0000 |
Connectors for Line-Shaft Conveyor Spools

Lock multiple spools together to increase drive power.
For technical drawings and 3-D models, click on a part number.
For Shaft Dia. | Lg. | Material | Each | |
1" | 2" | Steel | 000000 | 00000 |
Clips for Line-Shaft Conveyor Spools

Clamp this clip onto the shaft to keep spools from slipping, preventing wear on the belt.
For technical drawings and 3-D models, click on a part number.
For Shaft Dia. | Lg. | Material | Color | Each | |
1" | 1/2" | Nylon Plastic | Black | 000000 | 00000 |
Motorized Round-Groove Conveyor Rollers



Also known as drive rollers, these connect to rollers with two grooves to power conveyors. The bearings are quiet-rolling to reduce conveyor noise and are shielded to keep out dirt and debris.
For Between Frame Wd. | For Belt Dia. | Roller Wd. | Cap., lbs. | Wire Lead Lg. | Bearing-to-Groove Wd. | Groove Ctr.-to-Ctr. Wd. | O'all Wd. | Includes | Choose a Speed | Each | |
24V DC—Duty Cycle is Continuous with Up to 30 Starts and Stops per Minute | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
7/16" Hex Axle—1.9" Dia. Galvanized Steel Roller | |||||||||||
13" | 3/16" | 12.88" | 70 | 19" | 2.31" | 1 1/4" | 14" | Zone Control Card | 0000000 | 0000000 | |
16" | 3/16" | 15.888" | 70 | 19" | 2.31" | 1 1/4" | 17" | Zone Control Card | 00000000 | 000000 | |
21" | 3/16" | 20.88" | 70 | 19" | 2.31" | 1 1/4" | 22" | Zone Control Card | 00000000 | 000000 | |
22" | 3/16" | 21.88" | 70 | 19" | 2.31" | 1 1/4" | 23" | Zone Control Card | 00000000 | 000000 | |
27" | 3/16" | 26.88" | 70 | 19" | 2.31" | 1 1/4" | 28" | Zone Control Card | 00000000 | 000000 | |
28" | 3/16" | 27.88" | 70 | 19" | 2.31" | 1 1/4" | 29" | Zone Control Card | 00000000 | 000000 | |
31" | 3/16" | 30.88" | 70 | 19" | 2.31" | 1 1/4" | 32" | Zone Control Card | 00000000 | 000000 | |
120V AC (Single Phase)—Duty Cycle is 3 Seconds On, 2 Seconds Off | |||||||||||
7/16" Hex Axle—1.9" Dia. Zinc-Plated Steel Roller | |||||||||||
13" | 3/16" | 12 7/16" | 120 | 2" | 2.17" | 1.3" | 14 1/16" | Terminal Block | 0000000 | 000000 | |
21" | 3/16" | 20 7/16" | 75 | 2" | 2.17" | 1.3" | 22 1/16" | Terminal Block | 0000000 | 000000 | |
27" | 3/16" | 26 7/16" | 65 | 2" | 2.17" | 1.3" | 28 1/16" | Terminal Block | 0000000 | 000000 | |
31" | 3/16" | 30 7/16" | 55 | 2" | 2.17" | 1.3" | 32 1/16" | Terminal Block | 0000000 | 000000 | |
240V AC (Three Phase)—Duty Cycle is 3 Seconds On, 2 Seconds Off | |||||||||||
7/16" Hex Axle—1.9" Dia. Zinc-Plated Steel Roller | |||||||||||
13" | 3/16" | 12 7/16" | 120 | 2" | 2.17" | 1.3" | 14 1/16" | Terminal Block | 0000000 | 000000 | |
21" | 3/16" | 20 7/16" | 75 | 2" | 2.17" | 1.3" | 22 1/16" | Terminal Block | 0000000 | 000000 | |
27" | 3/16" | 26 7/16" | 65 | 2" | 2.17" | 1.3" | 28 1/16" | Terminal Block | 0000000 | 000000 | |
31" | 3/16" | 30 7/16" | 55 | 2" | 2.17" | 1.3" | 32 1/16" | Terminal Block | 0000000 | 000000 |
1.9" Diameter Motorized Conveyor Rollers


Add power to a gravity conveyor or build a custom powered conveyor. Rollers can be hardwired to operate in either direction. They have shielded bearings to keep out dust and debris.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | O'all Wd. | Wire Lead Lg. | Includes | Choose a Speed, fpm | Each | |
120V AC (Single Phase)—Duty Cycle is Continuous | |||||||||
7/16" Hex Axle—1.9" Dia. Zinc-Plated Steel Roller | |||||||||
13" | 12 3/8" | 17 | 140 | 14 1/4" | 2" | Terminal Block | 0000000 | 0000000 | |
16" | 15 3/8" | 17 | 140 | 17 1/4" | 2" | Terminal Block | 0000000 | 000000 | |
22" | 21 7/16" | 17 | 95 | 23 1/4" | 2" | Terminal Block | 0000000 | 000000 | |
240V AC (Three Phase)—Duty Cycle is Continuous | |||||||||
7/16" Hex Axle—1.9" Dia. Zinc-Plated Steel Roller | |||||||||
13" | 12 3/8" | 17 | 140 | 14 1/4" | 2" | Terminal Block | 0000000 | 000000 | |
16" | 15 3/8" | 17 | 140 | 17 1/4" | 2" | Terminal Block | 0000000 | 000000 | |
22" | 21 7/16" | 17 | 95 | 23 1/4" | 2" | Terminal Block | 0000000 | 000000 |