We will reply to your message within an hour.
More
Magnetic force holds doors closed.
To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.
These latches withstand temperatures up to 480° or 570° F.
Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.
Open and close these magnetic latches with a push—there's no need for a handle. Often used on audio and visual cabinets, magnetic force keeps your doors closed.
A catch grabs and holds the strike plate, so doors stay shut when you push them closed.
Turn the screw on the latch to adjust the gripping force on the strike plate.
Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.
Doors stay closed with the pressure of rollers against the strike plate.
These latches use downward compression to pull surfaces together for sealing gasketed doors.
A safety catch prevents accidental opening.
A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.
Easily snap these latches into cutouts without tools or other hardware.
Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.
To prevent accidental opening, these latches have a safety catch.
An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.
No need for a strike plate, these latches hook into a lip or notch.
These latches have a safety catch to prevent accidental opening.
Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.
These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.
Each latch comes with a variety of strike plates for different mounting options.
Draw lightweight surfaces together with these latches.
Use these L-handle latches to draw lightweight surfaces together.
Lift and turn the handle 180° to open and close these latches.
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.
Use a 5/16" hex key to open and close these locks.
Open these locks with a Torx driver or the included Torx keys.
Open these locks with a slotted screwdriver.
Add a padlock to secure these latches, which reach around corners to pull two surfaces together.
For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.
Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.
Adjust the latching distance to compensate for gasketing and misalignment.
Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.
Lift and turn the handle 180° to open and close this lock.
For use on gasketed doors, these latches use downward compression to pull surfaces together.
Open several draw locks with the same key.
Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Press the button and the handle snaps open; push the handle shut for a secure hold.
Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Install these locks on enclosure doors with smaller-than-standard diameter through holes. Also known as compression cam locks, these create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.
Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.
These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.
These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use.
Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers.
For use alone or as part of an access-control system, these locks use magnets to hold gates closed.