Filter by
System of Measurement
Mount Type
Width
Shape
Material
Length
Head Length
Fastener Head Type
Specifications Met
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
Head Width
Load Capacity
Range of Motion
Tip Diameter
Tip-to-Head Length
Threaded Locating and Support Buttons
Use these buttons to support and position workpieces and fixtures from the bottom or side. Their hex shape lets you screw them into a threaded hole with a wrench or socket. Threading makes these buttons easier to replace than press-fit, so they are a good choice for high-wear applications. They’re also known as rest buttons.
Metric
With Flat Head
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg., mm | Wd., mm | Size | Pitch, mm | Lg., mm | Lg. Tolerance, mm | Specifications Met | Each | |
Steel with Flat Head | ||||||||
| 10 | 10 | M6 | 1 | 11 | -0.2 to 0.2 | DIN 6320 | 0000000 | 00000 |
Swiveling Locating and Support Buttons
The swiveling tip supports uneven and angled surfaces on workpieces and fixtures. These buttons screw into a threaded hole. Also known as rest buttons.
Metric
Head | Thread | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Tip Dia., mm | Lg., mm | Wd., mm | Tip-to-Head Lg., mm | Lg., mm | Size | Pitch, mm | Lg., mm | Range of Motion | Head Lg. Tolerance, mm | Load Capacity, lbs. | Tip Material | Each | |
Steel | |||||||||||||
| 8 | 8 | 10 | 2 | 10 | M6 | 1 | 12 | 28° | -0.05 to 0.05 | 2,050 | Stainless Steel | 0000000 | 000000 |