Prevent injuries from unexpected machine startups during maintenance and repair—these labels remind you to lock out equipment. Marking lockout points on electrical circuits, valves, plugs, and other energy sources helps you comply with OSHA 29 CFR 1910.147 standards.

Labels with a header meet OSHA 29 CFR 1910.145 safety color standards for indicating hazards. Danger headers are used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury. Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.

Use labels with a magnetic back on equipment you clean often. They’re easier to remove and reapply than adhesive-back labels.

Separate indicating arrows from the rest of the label to point directly at the spot that needs a lockout.

Glow-in-the-dark labels are easier to see in dark areas or during power outages.

The headers and illustrations on these labels help workers identify lockout reminders at a glance. Use them where space is limited to prevent unexpected machine startups during maintenance and repair work.

Labels with a header meet OSHA/ANSI safety color standards for indicating hazards. Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury. Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.

Lockout for Safety labels are safety yellow to designate caution.

Add lockout symbols to an existing label or use alone to provide lockout reminders at a glance. Use them where space is limited to prevent unexpected machine startups during maintenance and repair work. Labels meet ISO, OSHA, and ANSI safety color standards for indicating hazards.

Identify hazards and unsafe practices that can injure workers around conveying equipment. These labels meet CEMA Brochure No. 201 standards and have headers and safety colors that meet OSHA/ANSI standards for indicating hazards.

Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury. Warning headers indicate a moderately hazardous situation that, if not avoided, may result in death or serious injury.

You’ll know instantly if someone has peeled off these security labels. When removed, the adhesive separates from the backing to reveal the words "Open" and "Void". Not offered in blank for security reasons.

Attach these labels to hard hats to provide safety reminders or to identify first-aid personnel.

A hinged design makes mounting these lockouts easy. All prevent valve handles from turning. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

For technical drawings and 3-D models, click on a part number.

Stop gas and fluid valve handles from opening and closing during maintenance. Valve lockouts like these help you comply with OSHA 29 CFR 1910.147, which requires handles on pneumatic and hydraulic systems to be locked out during maintenance to prevent injuries.

Slide-on lockouts fit onto the valve handle; the valve body prevents the handle from turning. All of these lockouts work on closed handles, but some also work on open ones. Style B lockouts have a two-piece molded design. Slide and clamp them over the valve lever to prevent the valve from being operated on. Style C lockouts have a cylinder and end cap that you place over your valve.

Clamp-on lockouts adjust to fit a range of handle sizes. Style F lockouts wedge compression handles, preventing them from being squeezed to stop your valve from operating.

Each lockout rotates into itself, making installation in tight spaces easier than other lockouts. All prevent valve handles from turning and include write-on labels. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

For technical drawings and 3-D models, click on a part number.

Close your valve, remove the handle, and store the handle in the lockout's zippered pouch. The lockout fits around the pipe, covers the valve stem, and secures the pouch's zipper to prevent valve operation. Write-on labels are included. It helps you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

For technical drawings and 3-D models, click on a part number.

Lock out the on/off or emergency-stop buttons on machinery to prevent accidental or unauthorized startups, such as during maintenance. These lockout covers secure with padlocks and indicate to workers that a button is off for safety. By disabling push buttons, these safety covers also help you comply with OSHA 29 CFR 1910.147 lockout requirements for maintaining machinery.

Removable safety covers twist on and off a mounted base that fits around a button. Use the included colored labels to identify the buttons. Red covers are easy to see when installed.

Lock out hoist controls, large electrical connectors, and other odd-sized controls. Bags have a cinch top to close. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

Place a plug into the cylinder and padlock so the plug can't be used. All of these lockouts are for use with a standard electrical plug that has a single cord. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

Lockouts for up to four or six padlocks let multiple workers add their own padlock, keeping everyone safe until all of the maintenance work is done. Those for up to six padlocks are also designed to hold a forklift plug with two cords.

For technical drawings and 3-D models, click on a part number.

After locking, pull the cable tight for a secure fit. This flexible cable wraps around and through panel boxes, freestanding equipment, and multiple gate valves to keep them inoperable. It includes write-on labels and is plastic coated so it won't mar surfaces. It helps you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

Same as our other low-profile lockout hasps, but with an attached label to record employee name and department. Use this lockout hasp to lock out a single energy control on machinery and electrical equipment so it can't be used. It helps you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers. Hasps that meet OSHA 29 CFR 1910.145 adhere to safety color standards for indicating hazards.

For technical drawings and 3-D models, click on a part number.

Lockouts come in different colors for easy identification and to help meet OSHA standards. The label is permanently attached to record employee name and department. Use these lockouts to lock out a single energy control on machinery and electrical equipment so it can't be used.

For technical drawings and 3-D models, click on a part number.

Get peace of mind when packaging high-value and confidential items—this tape indicates a package has been opened.

Tape with message revealed shows a message when the tape is removed.

Tape with stripe alignment cannot be realigned if the tape has been cut.