Control and maintain the pressure of your compressed air. These regulators connect to other Norgren units of the same series with joiner clamps (sold separately), so you can customize your air preparation system. They’re relieving, so they will exhaust when the downstream pressure exceeds the set pressure. Install these regulators in your air line after filters.

Series 82 and 84 regulators with a knob can be locked to prevent unwanted pressure changes. Slip a padlock through a hole in the knob to secure.

Mounting brackets (sold separately) allow you to attach these regulators to a wall or equipment.

Joiner clamps (sold separately) create compact, airtight connections between components that are easy to swap out—even if the pipe sizes are slightly different. They come with mounting brackets.

End block sets (sold separately) allow you to swap out components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.

Adjust and maintain the pressure of your compressed air. Install these regulators in your air line after filters.

Relieving regulators exhaust when the downstream pressure exceeds the set pressure.

Regulators with a padlockable knob let you prevent unwanted pressure changes. Slip a padlock through a hole in the knob to secure.

Mounting brackets (sold separately) allow you to attach the regulator to a wall or equipment.

Install these regulators directly on your air-powered tool to maintain the set air pressure.

Nonrelieving regulators do not exhaust excess downstream pressure. These regulators are intermittent duty, so they’re ideal for tools that require short bursts of air, such as nailers, staplers, and small drills.

Regulators with a collar adjustment have a screw lock to prevent accidental changes to the set pressure as you use and jostle your tool. Turn the collar to adjust the pressure.

Mount these regulators to a 35 mm DIN rail with the included brackets. Use them to adjust and maintain the pressure of your compressed air. All are relieving regulators, so they exhaust when the downstream pressure exceeds the set pressure. A padlock can be attached to the knob to prevent unauthorized changes to the pressure. Install these regulators in your air line after your filters.

Monitor and adjust compressed air pressure at the source and remotely. These regulators use an electronic pressure sensor and a color-changing display to give you instant feedback—green for in range, red for out of range, and yellow for errors. Set the pressure using the knob, display buttons, or connect them to your programmable logic control (PLC) via IO-Link. When connected to your industrial network, you’ll be able to change settings remotely, monitor performance, and run diagnostics. You’ll need an M8 connecting cable (sold separately) to link them to your network. Install these regulators in your air line after filters.

To prevent unauthorized or accidental changes, lock the knob with a padlock. You can also protect settings made on the display and PLC with a PIN code.

Mounting brackets (sold separately) allow you to attach the regulator to a wall or equipment.

Use these regulators in sensitive applications that require constant, consistent pressure for precise force and movement. They’re often used on calibration stands in laboratories or with air-powered clamps that hold delicate items. All are relieving regulators, so they exhaust when the downstream pressure exceeds the set pressure. Install them in your air line after filters.

BSPP threads are also known as G threads.

Regulators with a ±0.1% accuracy have a sensor and a servo-adjustment mechanism that work together to monitor pressure and instantly adapt to input pressure changes—even when conditions change. They have a locking nut to prevent accidental pressure changes.

Mounting brackets (sold separately) let you attach the regulator to a wall or equipment.

A filter and regulator joined top-to-bottom, these filter/regulators provide clean, compressed air at the pressure you need. They connect to other Festo units of these same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

Slip a padlock through a hole in the knob to prevent unwanted pressure changes. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.