Rated NEMA 4 or IP66, these switches are protected from washdowns.

Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Control circuits with the tap of an RFID tag. Since each tag has a unique digital code, these switches aren’t just quicker to use than those with a traditional key—they’re also more secure.

These 16 mm switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Designed for use near ignitable gases, fibers, and dust, these switches have a housing that seals in anything that could ignite flammable material. They require a key to turn circuits on or off, preventing accidental activation and limiting access.

Reset fire panels, or open electromagnetic locks, electric strikes, and automatic door openers. These switches require a key to turn circuits on or off, limiting access and preventing accidental activation.

Choose an actuator and contact block to make your own 22 mm plastic switch.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.

Replace the hinges on access doors or machine guards with these switches to keep your team safe from active machinery.

The convenient, modern alternative to mechanical safety switches. These RFID switches are easier to install, fit a wider range of access points, and can mount horizontally.

Prevent accidental bumps or vibration from triggering these safety switches unnecessarily—a strong magnet maintains the RFID signal between the actuator and switch until it's intentionally opened.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit.

Small yet mighty, these switches are about as tall and wide as an index card yet durable enough to mount directly to a wall.

Cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. These switches are housed in a protective enclosure that resists denting, chipping, and cracking.

Install these switches inside an enclosure to prevent it from opening when power is on—turn the switch to disconnect power and release the door.

Stop battery drain and prevent the theft or unauthorized use of equipment by disconnecting batteries when not in use.

A raintight NEMA 3R rated enclosure protects these switches outdoors.

Rated IP69K, these switches are protected from high-pressure and high-temperature washdowns.

Often used in electrical enclosures, these switches mount directly to DIN rails. They cut power and keep it isolated to stop equipment from starting up during inspection and maintenance.