Filter by
Handle Position When Clamped
Holding Capacity
Arm Length
Body Material
Holding Screw Tip Material
Handle Material
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Hold-Down Toggle Clamps with Locking Handle
 |  |  |
With Open Arm | With Cut-to-Length Arm | Cut-to-length clamp is supplied in two pieces that must be welded together. |
Push the lever to lock the handle and prevent accidental opening.
With Open Arm—Clamps with an open arm let you move the holding screw to any position along the arm. To achieve maximum holding capacity, position the screw closest to the base. Capacity decreases by as much as 65% when the screw is positioned at the end of the arm.
With Cut-to-Length Arm—Clamps with a cut-to-length arm come in two pieces that must be welded together. Cut the arm to length, then weld the screw holder to the end of the arm. Holding capacity is for the arm length as supplied. Capacity increases when arm is cut and screw is positioned closer to the body of the clamp.
18-8 Stainless Steel Body—Stainless steel clamps have excellent corrosion resistance.
Arm | When Clamped | Holding Screws | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Max. Clamping Clearance | Ht. | Lg. | Opening Angle | Overall Lg. | Overall Ht. | No. of | Tip Material | Thread Size | Each | |||
With Open Arm | |||||||||||||
Steel Body | |||||||||||||
| 230 | 1/4" | 7/8" | 2 3/8" | 95° | 3 3/8" | 4 1/8" | 2 | Steel, Rubber | 1/4"-20 | 51325A12 | 000000 | ||
| 375 | 9/32" | 1 1/4" | 2 1/4" | 95° | 4 3/4" | 7" | 2 | Steel, Rubber | 5/16"-18 | 51325A43 | 00000 | ||
| 600 | 11/32" | 1 3/4" | 3 3/4" | 100° | 6 3/4" | 8 1/4" | 2 | Steel, Rubber | 3/8"-16 | 51325A44 | 00000 | ||
| 1,400 | 7/16" | 1 11/16" | 3 9/16" | 75° | 7 1/2" | 9 1/16" | 2 | Steel, Rubber | 3/8"-16 | 51325A11 | 00000 | ||
18-8 Stainless Steel Body | |||||||||||||
| 600 | 3/16" | 15/16" | 1 15/16" | 75° | 4 1/4" | 4 3/4" | 2 | Stainless Steel, Rubber | M6 | 51325A61 | 00000 | ||
| 1,000 | 3/16" | 1 1/4" | 2 7/8" | 75° | 6 1/8" | 7 3/16" | 2 | Stainless Steel, Rubber | M8 | 51325A62 | 00000 | ||
With Cut-to-Length Arm | |||||||||||||
Steel Body | |||||||||||||
| 500 | 5/16" | 1 1/4" | 3 1/2" | 95° | 4 7/8" | 6 15/16" | 2 | Steel, Rubber | M8 | 51325A63 | 00000 | ||
| 750 | 11/32" | 1 11/16" | 3 5/8" | 100° | 6 11/16" | 8 3/16" | 2 | Steel, Rubber | M10 | 51325A64 | 00000 | ||
Latch-Style Toggle Clamps with Locking Handle
 |  |
Style A | Style B |
 | |
Style C |
Push the lever to lock the handle and prevent accidental opening. Fit the draw arm over a latch plate and pull the handle to clamp. These clamps have an adjustable draw arm that allows you to change the length.
Hook-Style Draw Arm—Clamps with hook-style draw arm do not include a latch plate. To use these clamps with a plate, you’ll have to fabricate your own.
Locking Toggle—Clamps with locking toggle have a locking plate that must be fastened with an M6 screw.
18-8 Stainless Steel Body—Stainless steel clamps have good corrosion resistance.
Clamps | Replacement Clamp Latch Plates | Replacement Clamp Draw Arm Pins | Replacement Grips | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Draw Arm | When Clamped | ||||||||||||||||
Holding Cap., lb. | Travel | Adjustability | Adjustment Lg. | Clearance | Overall Ht. | Overall Lg. | Grip Style | Each | Each | Each | Each | ||||||
Style A—U-Style Draw Arm with Latch Plate Included | |||||||||||||||||
Steel Body | |||||||||||||||||
| 360 | 1 3/16" | Adjustable | 13/32" | 1/2" | 1 3/16" | 4 1/4" | Cushion | 51335A69 | 000000 | 5071A511 | 00000 | 5071A14 | 00000 | 5071A106 | 00000 | ||
| 720 | 1 3/4" | Adjustable | 1/2" | 11/16" | 2" | 6 9/16" | Cushion | 51335A65 | 00000 | 5071A521 | 0000 | 5071A141 | 0000 | 5071A105 | 0000 | ||
| 720 | 1 3/4" | Adjustable | 7/8" | 11/16" | 2" | 8 9/16" | Cushion | 51335A77 | 00000 | 5071A521 | 0000 | 5071A141 | 0000 | 5071A105 | 0000 | ||
| 2,000 | 2 1/2" | Adjustable | 23/32" | 15/16" | 2 7/8" | 8 15/16" | Cushion | 5071A62 | 00000 | 5071A531 | 0000 | 5071A142 | 00000 | 5071A107 | 0000 | ||
| 2,000 | 2 1/2" | Adjustable | 1" | 15/16" | 2 7/8" | 10 15/16" | Cushion | 51335A78 | 00000 | 5071A531 | 0000 | ——— | 0 | 5071A107 | 0000 | ||
| 4,000 | 3 1/2" | Adjustable | 13/16" | 1 1/8" | 4 3/16" | 11 1/4" | Cushion | 51335A15 | 000000 | 5071A56 | 00000 | 5071A143 | 0000 | 5071A108 | 0000 | ||
18-8 Stainless Steel Body | |||||||||||||||||
| 360 | 1 3/16" | Adjustable | 13/32" | 1/2" | 1 3/16" | 4 1/4" | Cushion | 51335A71 | 00000 | 5071A571 | 0000 | 5071A145 | 0000 | 5071A106 | 0000 | ||
| 720 | 1 3/4" | Adjustable | 1/2" | 11/16" | 2" | 6 9/16" | Cushion | 51335A67 | 00000 | 5071A581 | 0000 | 5071A146 | 0000 | 5071A105 | 0000 | ||
| 720 | 1 3/4" | Adjustable | 7/8" | 11/16" | 2" | 8 9/16" | Cushion | 51335A81 | 000000 | 5071A581 | 0000 | 5071A146 | 0000 | 5071A105 | 0000 | ||
| 2,000 | 2 1/2" | Adjustable | 23/32" | 15/16" | 2 7/8" | 8 15/16" | Cushion | 51335A68 | 000000 | 5071A591 | 00000 | 5071A149 | 00000 | 5071A107 | 0000 | ||
Style B—U-Style Draw Arm with Latch Plate Included | |||||||||||||||||
Steel Body | |||||||||||||||||
| 7,500 | 2 1/4" | Adjustable | 1 23/64" | 1 1/8" | 3 11/16" | 10 13/16" | Plain | 5071A63 | 000000 | 5071A56 | 00000 | 5071A144 | 0000 | ——— | 0 | ||
| 8,900 | 2 7/16" | Adjustable | 1" | 1 1/16" | 2 11/16" | 10 11/16" | Plain | 51335A73 | 000000 | 51335A731 | 00000 | ——— | 0 | ——— | 0 | ||
18-8 Stainless Steel Body | |||||||||||||||||
| 3,100 | 2 1/8" | Adjustable | 9/16" | 13/16" | 2 3/16" | 8 3/4" | Plain | 51335A84 | 000000 | 51335A741 | 00000 | ——— | 0 | ——— | 0 | ||
| 6,700 | 2 7/16" | Adjustable | 1" | 1 1/16" | 2 11/16" | 10 11/16" | Plain | 51335A85 | 000000 | 51335A751 | 00000 | ——— | 0 | ——— | 0 | ||
Style C—Hook-Style Draw Arm | |||||||||||||||||
Steel Body | |||||||||||||||||
| 1,500 | 3/4" | Adjustable | 9/16" | 11/16" | 1 3/4" | 9" | Cushion | 51335A76 | 00000 | ——— | 0 | ——— | 0 | 5071A11 | 0000 | ||
Style C—Hook-Style Draw Arm with Locking Toggle | |||||||||||||||||
Steel Body | |||||||||||||||||
| 375 | 4" | Adjustable | 15/32" | 3/4" | 1 3/8" | 9 7/16" | Cushion | 5136A65 | 00000 | ——— | 0 | ——— | 0 | ——— | 0 | ||
| 750 | 5 3/8" | Adjustable | 15/16" | 1 1/2" | 2 1/4" | 12 3/4" | Cushion | 5136A66 | 00000 | ——— | 0 | ——— | 0 | ——— | 0 | ||
18-8 Stainless Steel Body | |||||||||||||||||
| 350 | 4" | Adjustable | 1/2" | 3/4" | 1 13/16" | 9 7/16" | Cushion | 51335A79 | 00000 | ——— | 0 | ——— | 0 | ——— | 0 | ||
Low-Profile Hold-Down Toggle Clamps with Locking Handle
 |
Push the lever to lock the handle and prevent accidental opening. The handle secures in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps. Move the holding screw to any position along the arm. To achieve maximum holding capacity, position the screw closest to the base. Capacity decreases by as much as 65% when the screw is positioned at the end of the arm.
Arm | When Clamped | Holding Screws | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Max. Clamping Clearance | Ht. | Lg. | Opening Angle | Overall Lg. | Overall Ht. | No. of | Tip Material | Thread Size | Each | |||
With Open Arm | |||||||||||||
Steel Body | |||||||||||||
| 295 | 3/16" | 3/4" | 1 5/8" | 70° | 5 7/8" | 1 5/16" | 2 | Steel, Rubber | 10-32 | 5128A76 | 000000 | ||
| 500 | 3/16" | 1 5/16" | 2 11/16" | 90° | 7 1/16" | 1 7/8" | 2 | Steel, Rubber | 5/16"-18 | 5128A56 | 00000 | ||
| 560 | 3/16" | 1" | 2 1/2" | 70° | 8 5/8" | 1 15/16" | 2 | Steel, Rubber | 1/4"-20 | 5128A78 | 00000 | ||
| 750 | 15/32" | 1 11/16" | 4 3/16" | 90° | 10 1/2" | 2 9/16" | 2 | Steel, Rubber | 3/8"-16 | 5128A57 | 00000 | ||
| 840 | 9/32" | 1 5/16" | 2 7/8" | 65° | 9 7/8" | 2 1/4" | 2 | Steel, Rubber | 5/16"-18 | 5128A79 | 00000 | ||
18-8 Stainless Steel Body | |||||||||||||
| 600 | 3/16" | 1 5/16" | 2 11/16" | 90° | 7 1/16" | 1 7/8" | 2 | Stainless Steel, Rubber | 5/16"-18 | 5128A91 | 00000 | ||
| 850 | 15/32" | 1 11/16" | 4 3/16" | 90° | 10 1/2" | 2 9/16" | 2 | Stainless Steel, Rubber | 3/8"-16 | 5128A92 | 000000 | ||
Push Toggle Clamps with Locking Handle
 |
Push the lever to lock the handle and prevent accidental opening. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg. | Overall Ht. | Overall Lg. | Grip Style | Each | |||
Push Only—Steel | |||||||||||||||
| 600 | 1 1/4" | 1" | 1 1/4" | Round | 7/16" | Internal | 5/16"-18 | 1" | 3 1/2" | 4 3/4" | Cushion | 6124A21 | 000000 | ||
| 600 | 1 1/4" | 1" | 1 1/4" | Round | 7/16" | Internal | M8 | 25 mm | 3 7/16" | 4 3/4" | Cushion | 6124A15 | 00000 | ||
| 2,500 | 2" | 13/16" | 2" | Round | 5/8" | Internal | 3/8"-16 | 1 1/4" | 3 1/16" | 7 1/16" | Cushion | 5093A77 | 000000 | ||
| 2,500 | 2" | 13/16" | 2" | Round | 5/8" | Internal | M10 | 31 mm | 3 1/16" | 7 1/16" | Cushion | 6124A12 | 000000 | ||
| 7,500 | 4 1/8" | 1 1/4" | 4" | Round | 7/8" | Internal | 1/2"-13 | 2" | 4 1/4" | 13 9/16" | Cushion | 6124A13 | 000000 | ||
| 7,500 | 4 1/8" | 1 1/4" | 4" | Round | 7/8" | Internal | M12 | 50 mm | 4 1/4" | 13 9/16" | Cushion | 6124A14 | 000000 | ||
Compact Hold-Down Toggle Clamps with Locking Handle
 |
Push the lever to lock the handle and prevent accidental opening. Often used when assembling small parts, these small clamps have the holding strength of a full-size clamp. They have an open arm, so you can move the holding screw to any position along the arm. To achieve maximum holding capacity, position the screw closest to the base. Capacity decreases by as much as 30% when the screw is positioned at the end of the arm.
Arm | When Clamped | Holding Screws | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Max. Clamping Clearance | Ht. | Lg. | Opening Angle | Overall Lg. | Overall Ht. | No. of | Tip Material | Thread Size | Each | |||
With Open Arm | |||||||||||||
Steel Body | |||||||||||||
| 150 | 5/16" | 5/16" | 1 3/16" | 90° | 2 1/4" | 1 3/8" | 2 | Steel, Rubber | 10-32 | 4961A11 | 000000 | ||
| 350 | 3/8" | 1/2" | 1 7/8" | 90° | 3 5/8" | 2 3/8" | 2 | Steel, Rubber | 5/16"-18 | 4961A12 | 00000 | ||
| 750 | 1/16" | 1 3/8" | 2 3/4" | 90° | 5 1/4" | 3 5/8" | 2 | Steel, Rubber | 3/8"-16 | 4961A13 | 00000 | ||
Hole-Mount Push/Pull Toggle Clamps with Locking Handle
 |
Push the lever to lock the handle and prevent accidental opening. Panel mount these clamps through a hole with the included nut, or drill and tap a hole to flush mount. They have an internally threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included).
Push-Only Clamp—Push-only clamps secure when the plunger is fully extended.
Push/Pull Clamp—Push/pull clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted.
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg. | Overall Ht. | Overall Lg. | Grip Style | Includes | Each | |||
Push/Pull—Steel | |||||||||||||||
| 450 | 1 1/2" | 1 1/2" | Round | 1/2" | Internal | 5/16"-18 | 1 3/8" | 4 3/16" | 5 1/2" | Cushion | Mounting Nut | 6124A17 | 0000000 | ||
Push Only—Steel | |||||||||||||||
| 750 | 2 3/4" | 2 5/8" | Round | 5/8" | Internal | 3/8"-16 | 1 1/4" | 4 7/8" | 7 1/8" | Cushion | Mounting Nut | 6124A27 | 00000 | ||
Right-Angle Latch-Style Toggle Clamps with Locking Handle
 |
Push the lever to lock the handle and prevent accidental opening. Mount the clamp on a lid and the latch plate on the side of a container. Fit the draw arm over a latch plate and pull the handle to clamp.
18-8 Stainless Steel Body—Stainless steel clamps have good corrosion resistance.
Clamps | Replacement Clamp Latch Plates | Replacement Clamp Draw Arms | Replacement Clamp Draw Arm Pins | Replacement Grips | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Draw Arm | When Clamped | Clamp Mounting Plate Mounting Holes | Latch Plate Mounting Holes | ||||||||||||||||||||
Holding Cap., lb. | Travel | Adjustability | Adjustment Lg. | Clearance | Overall Ht. | Overall Lg. | Grip Style | No. of | Dia. | No. of | Dia. | Each | Each | Each | Each | Each | |||||||
U-Style Draw Arm with Latch Plate Included | |||||||||||||||||||||||
Steel Body | |||||||||||||||||||||||
| 500 | 1 1/2" | Adjustable | 1/2" | 3/16" | 3 9/16" | 3 1/2" | Cushion | 4 | 13/64" | 2 | 3/16" | 5135A41 | 000000 | 5135A1 | 00000 | 5135A9 | 00000 | ——— | 0 | ——— | 0 | ||
| 500 | 1 1/2" | Adjustable | 1/2" | 3/16" | 4 9/16" | 3 1/2" | Cushion | 4 | 13/64" | 2 | 3/16" | 5135A501 | 00000 | 5135A1 | 0000 | 5135A519 | 00000 | ——— | 0 | ——— | 0 | ||
| 500 | 1 1/2" | Adjustable | 1/2" | 3/16" | 5 1/2" | 3 1/2" | Cushion | 4 | 13/64" | 2 | 3/16" | 5135A502 | 00000 | 5135A1 | 0000 | 5135A52 | 00000 | ——— | 0 | ——— | 0 | ||
| 500 | 1 1/2" | Adjustable | 1/2" | 3/16" | 7 1/2" | 3 1/2" | Cushion | 4 | 13/64" | 2 | 3/16" | 5135A503 | 00000 | 5135A1 | 0000 | 5135A521 | 00000 | ——— | 0 | ——— | 0 | ||
| 1,000 | 2 1/16" | Adjustable | 25/32" | 3/8" | 4 7/8" | 4 1/8" | Cushion | 4 | 9/32" | 2 | 7/32" | 5135A42 | 00000 | 5135A2 | 0000 | 5135A11 | 0000 | ——— | 0 | ——— | 0 | ||
| 1,000 | 2 1/16" | Adjustable | 25/32" | 3/8" | 5 9/16" | 4 1/8" | Cushion | 4 | 9/32" | 2 | 7/32" | 5135A504 | 00000 | 5135A2 | 0000 | 5135A522 | 00000 | ——— | 0 | 5071A105 | 00000 | ||
| 1,000 | 2 1/16" | Adjustable | 25/32" | 3/8" | 6 9/16" | 4 1/8" | Cushion | 4 | 9/32" | 2 | 7/32" | 5135A505 | 00000 | 5135A2 | 0000 | 5135A523 | 00000 | ——— | 0 | 5071A105 | 0000 | ||
| 2,000 | 2 7/16" | Adjustable | 1 1/4" | 1/2" | 6 7/8" | 5 3/4" | Cushion | 4 | 11/32" | 2 | 11/32" | 5135A43 | 00000 | 5135A3 | 0000 | 5135A12 | 0000 | 5071A142 | 000000 | 5071A107 | 0000 | ||
| 2,000 | 2 7/16" | Adjustable | 1 1/4" | 1/2" | 7 3/4" | 5 3/4" | Cushion | 4 | 11/32" | 2 | 11/32" | 5135A507 | 000000 | 5135A3 | 0000 | 5135A525 | 00000 | 5071A142 | 00000 | 5071A107 | 0000 | ||
| 2,000 | 2 7/16" | Adjustable | 1 1/4" | 1/2" | 8 3/4" | 5 3/4" | Cushion | 4 | 11/32" | 2 | 11/32" | 5135A508 | 000000 | 5135A3 | 0000 | 5135A526 | 00000 | 5071A142 | 00000 | 5071A107 | 0000 | ||
| 2,000 | 2 7/16" | Adjustable | 1 1/4" | 1/2" | 10 3/4" | 5 3/4" | Cushion | 4 | 11/32" | 2 | 11/32" | 5135A509 | 000000 | 5135A3 | 0000 | 5135A527 | 00000 | 5071A142 | 00000 | 5071A107 | 0000 | ||
18-8 Stainless Steel Body | |||||||||||||||||||||||
| 500 | 1 1/2" | Adjustable | 1/2" | 3/16" | 3 9/16" | 3 1/2" | Cushion | 4 | 13/64" | 2 | 3/16" | 5135A32 | 00000 | 5135A5 | 0000 | 5135A14 | 00000 | ——— | 0 | ——— | 0 | ||
| 500 | 1 1/2" | Adjustable | 1/2" | 3/16" | 4 9/16" | 3 1/2" | Cushion | 4 | 13/64" | 2 | 3/16" | 5135A51 | 000000 | 5135A5 | 0000 | 5135A528 | 00000 | ——— | 0 | ——— | 0 | ||
| 500 | 1 1/2" | Adjustable | 1/2" | 3/16" | 5 1/2" | 3 1/2" | Cushion | 4 | 13/64" | 2 | 3/16" | 5135A511 | 000000 | 5135A5 | 0000 | 5135A529 | 00000 | ——— | 0 | ——— | 0 | ||
| 500 | 1 1/2" | Adjustable | 1/2" | 3/16" | 7 1/2" | 3 1/2" | Cushion | 4 | 13/64" | 2 | 3/16" | 5135A512 | 000000 | 5135A5 | 0000 | 5135A53 | 00000 | ——— | 0 | ——— | 0 | ||
| 1,000 | 2 1/16" | Adjustable | 25/32" | 3/8" | 4 5/8" | 4 1/8" | Cushion | 4 | 9/32" | 2 | 7/32" | 5135A34 | 000000 | 5135A6 | 00000 | 5135A15 | 00000 | ——— | 0 | 5071A105 | 0000 | ||
| 1,000 | 2 1/16" | Adjustable | 25/32" | 3/8" | 5 9/16" | 4 1/8" | Cushion | 4 | 9/32" | 2 | 7/32" | 5135A513 | 000000 | 5135A6 | 00000 | 5135A531 | 00000 | ——— | 0 | 5071A105 | 0000 | ||
| 1,000 | 2 1/16" | Adjustable | 25/32" | 3/8" | 6 9/16" | 4 1/8" | Cushion | 4 | 9/32" | 2 | 7/32" | 5135A514 | 000000 | 5135A6 | 00000 | 5135A532 | 00000 | ——— | 0 | 5071A105 | 0000 | ||
| 2,000 | 2 7/16" | Adjustable | 1 1/4" | 1/2" | 6 9/16" | 5 3/4" | Cushion | 4 | 11/32" | 2 | 11/32" | 5135A36 | 000000 | 5135A7 | 00000 | 5135A16 | 00000 | 5071A149 | 00000 | 5071A107 | 0000 | ||
| 2,000 | 2 7/16" | Adjustable | 1 1/4" | 1/2" | 7 9/16" | 5 3/4" | Cushion | 4 | 11/32" | 2 | 11/32" | 5135A516 | 000000 | 5135A7 | 00000 | 5135A534 | 00000 | 5071A149 | 00000 | 5071A107 | 0000 | ||
| 2,000 | 2 7/16" | Adjustable | 1 1/4" | 1/2" | 8 9/16" | 5 3/4" | Cushion | 4 | 11/32" | 2 | 11/32" | 5135A517 | 000000 | 5135A7 | 00000 | 5135A535 | 00000 | 5071A149 | 00000 | 5071A107 | 0000 | ||
| 2,000 | 2 7/16" | Adjustable | 1 1/4" | 1/2" | 10 1/2" | 5 3/4" | Cushion | 4 | 11/32" | 2 | 11/32" | 5135A518 | 000000 | 5135A7 | 00000 | 5135A536 | 00000 | 5071A149 | 00000 | 5071A107 | 0000 | ||
Compact Push Toggle Clamps with Locking Handle
 |
Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications. Push the lever to lock the handle and prevent accidental opening. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
