McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    12 Products

    Clamp-On Circuit Breaker Lockouts

    Image of Product. Front orientation. Lockouts. Clamp-On Circuit Breaker Lockouts, Style C.
    Image of Product. Front orientation. Lockouts. Clamp-On Circuit Breaker Lockouts, Style D.

    Style C

    Style D

    A lockout for every style of circuit breaker switch—these lockouts clamp over your switch, so it doesn’t matter if it has a through hole. Secure these lockouts with a padlock. Less disruptive than locking access to an entire panel, they isolate a single circuit or group of circuits. These lockouts help you comply with OSHA 29 CFR 1910.147 requirements for the control of electrical circuits to prevent injuries.
    Style C
    Image of ProductInUse. Lockout with Cable Tie Slot Shown Installed (Padlock and Cable Tie Not Included). Front orientation. Lockouts. Clamp-On Circuit Breaker Lockouts, Style C.
    Image of ProductInUse. Lockout Shown Installed (Padlock Not Included). Front orientation. Contains MultipleImages. Lockouts. Clamp-On Circuit Breaker Lockouts, Style C.

    Lockout with Cable Tie Slot

    Shown

    Installed (Padlock and

    Cable Tie Not Included)

    Lockout Shown Installed

    (Padlock Not Included)

    Image of Product. Front orientation. Lockouts. Clamp-On Circuit Breaker Lockouts, Style C.
    Style C have a large plastic knob that’s easy to tighten, even if you’re wearing gloves.
    For Single Pole—Single-pole lockouts secure a single switch.
    Mounting Cleat—Use mounting cleats for switches with a recess that’s too large for your lockout. To prevent accidental flipping when locked out, attach the cleat to your lockout and it will wedge into your switch’s recess.
    Cable Tie Slot—Lockouts with a cable tie slot let you apply tags directly to the lockout instead of attaching them to a padlock. To secure multiple lockouts with one tag, run one cable tie through adjacent lockouts. These lockouts won’t open until the padlock is removed and your cable tie is cut. There are slots for up to three ties for group lockouts.
    For Max.
    Switch
    Overall
    For Voltage,
    V AC
    Wd.
    Thk.
    Lg.
    Wd.
    Dp.
    For Circuit
    Breaker Pole Type
    For Mfr.
    For Max. No.
    of Padlocks
    For Max. Padlock
    Shackle Dia.
    Temp. Range,
    ° F
    Color
    Includes
    Features
    Each
    Plastic
    120
    277    		5/8"3/8"2 3/16"13/16"11/16"Single PoleABB, Airpax, Cutler-Hammer, Federal Pacific Electric, Fuji, General Electric, Merlin Gerin, Siemens, Square D, Thomas & Betts, Westinghouse19/32"0 to 175RedMounting Cleat—12365A71000000
    120
    277    		2 5/8"—1 3/8"1 1/16"1 1/4"Single PoleABB, Airpax, American Circuit Breakers, American Switch, Bryant, Challenger, Cutler-Hammer, Federal Pacific Electric, Fuji, GE, Heinemann, Lemag, Merlin Gerin, Siemens, Square D, Thomas & Betts19/32"-40 to 230RedCable Ties
    Mounting Cleat    		Cable Tie Slot12365A30900000
    480
    600    		1 1/2"1/2"2 3/4"2 5/16"2"Single PoleABB, American Circuit Breakers, Challenger, Cutler-Hammer, Federal Pacific Electric, General Electric, Merlin Gerin, Siemens, Square D, Westinghouse19/32"0 to 175RedMounting Cleat—12365A7200000
    480
    600    		3 3/4"—1 7/8"2 3/16"3 3/16"Single PoleABB, American Circuit Breakers, Challenger, Cutler-Hammer, GE, Merlin Gerin, Siemens, Square D, Westinghouse19/32"0 to 175RedCable Ties
    Mounting Cleat    		Cable Tie Slot12365A31100000
     
    Style D
    Image of ProductInUse. Shown Installed (Padlock Not Included). Front orientation. Lockouts. Clamp-On Circuit Breaker Lockouts, Style D.
    Image of Product. Front orientation. Lockouts. Clamp-On Circuit Breaker Lockouts, Style D.

    Shown Installed (Padlock

    Not Included)

    Style D have a slotted metal knob you can tighten by hand or with a flat-head screwdriver. With durable metal hinge points, they’ll stand up to repeated use.
    For Single Pole—Single-pole lockouts secure a single switch.
    Mounting Cleat—Use mounting cleats for switches with a recess that’s too large for your lockout. To prevent accidental flipping when locked out, attach the cleat to your lockout and it will wedge into your switch’s recess.
    For Max.
    Switch
    Overall
    For Voltage,
    V AC
    Wd.
    Thk.
    Lg.
    Wd.
    Dp.
    For Circuit
    Breaker Pole Type
    For Mfr.
    For Max. No.
    of Padlocks
    For Max. Padlock
    Shackle Dia.
    Temp. Range,
    ° F
    Color
    Includes
    Each
    Plastic
    480
    600    		13/16"9/16"3"1"1 3/4"Single PoleABB, Cutler-Hammer, GE, Schneider Electric, Siemens, Square D, Westinghouse19/32"-40 to 200RedMounting Cleat12365A307000000
    480
    600    		2 3/4"1"4 1/16"3 3/8"1 7/8"Single PoleABB, Cutler-Hammer, Schneider Electric, Siemens, Square D, Westinghouse19/32"-40 to 200RedMounting Cleat12365A30800000
     

    Circuit Breaker Lockout Bars

    Image of ProductInUse. (Padlock Not Included). Front orientation. Contains Annotated, MultipleImages. Lockouts. Circuit Breaker Lockout Bars.

    (Padlock Not Included)

    Snap these bars into place to block circuit breaker switches from being flipped—even large, high-voltage switches. They attach to mounts on either side of your switch to physically block its movement. Secure them with a padlock. Use these lockouts to either keep equipment from starting up when it’s getting repaired or prevent critical equipment from powering down. After you’ve locked out a switch, you can still use the rest of your breaker box. These lockouts help you comply with OSHA 29 CFR 1910.147 requirements for the control of electrical circuits to prevent injuries.
    For a complete lockout, you’ll need a bar and two lock mounts. You can either buy them individually or in a kit. Choose a red bar to lock out the off position; choose a green bar for the on position.
    Lockout Bars
    Image of Product. Front orientation. Lockouts. Circuit Breaker Lockout Bars, Lockout Bars.
    Overall
    For Max.
    Switch Wd.
    Lg.
    Wd.
    Dp.
    For Circuit Breaker Pole Type
    For Circuit Breaker
    Switch Type
    Temp. Range,
    ° F
    Specs. Met
    Each
    Red Plastic
    5 7/8"7 5/8"5/16"1/4"Single Pole, Double Pole, Triple Pole, Multipole, Tie Bar MultipoleThrough Hole, No Hole0 to 250OSHA Compliant 29 CFR 1910.147
    		7517N1200000
     
    Green Plastic
    5 7/8"7 5/8"5/16"1/4"Single Pole, Double Pole, Triple Pole, Multipole, Tie Bar MultipoleThrough Hole, No Hole0 to 250OSHA Compliant 29 CFR 1910.147
    		7517N130000
     
    Lock Mounts
    Image of Product. Front orientation. Lockouts. Circuit Breaker Lockout Bars, Lock Mounts.
    Lock
    Mount
    Overall
    Lg.
    For Circuit Breaker Pole Type
    For Circuit Breaker
    Switch Type
    For Max. No.
    of Padlocks
    For Max. Padlock
    Shackle Dia.
    Lg.
    Wd.
    Dp.
    Mount Type
    Temp. Range,
    ° F
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Yellow Plastic
    4"Single Pole, Double Pole, Triple Pole, Multipole, Tie Bar MultipoleThrough Hole, No Hole75/16"4"13/16"11/16"Adhesive Back0 to 250OSHA Compliant 29 CFR 1910.147
    		27517N14000000
     
    Lockout Bar Holders
    Image of Product. Front orientation. Lockouts. Circuit Breaker Lockout Bars, Lockout Bar Holders.
    Mount lockout bar holders near your breaker box to store your lockout bars.
    Overall
    Lg.
    Wd.
    Dp.
    For Circuit Breaker Pole Type
    For Circuit Breaker
    Switch Type
    Mount Type
    Temp. Range,
    ° F
    Specs. Met
    Each
    Yellow Plastic
    4"13/16"3/4"Single Pole, Double Pole, Triple Pole, Multipole, Tie Bar MultipoleThrough Hole, No HoleAdhesive Back0 to 250OSHA Compliant 29 CFR 1910.147
    		7517N1500000
     
    Lockout Bar Kits
    Image of Product. Front orientation. Lockouts. Circuit Breaker Lockout Bars, Lockout Bar Kits.
    Lockout bar kits come with an alcohol prep pad. To ensure the mounts and lockout bars adhere to your circuit breaker housing, clean them off with the pad first. These kits cannot be sold outside the United States due to import restrictions.
    Lock
    Mount
    For Max.
    Switch Wd.
    Overall
    Lg.
    For Circuit Breaker Pole Type
    For Circuit Breaker
    Switch Type
    For Max. No.
    of Padlocks
    For Max. Padlock
    Shackle Dia.
    Lg.
    Wd.
    Dp.
    Type
    Temp. Range,
    ° F
    Includes
    Specs. Met
    Each
    Plastic—Cannot Be Sold Outside United States
    5 7/8"7.625"Single Pole, Double Pole, Triple Pole, Multipole, Tie Bar MultipoleThrough Hole, No Hole75/16"4"13/16"11/16"Adhesive Back0 to 250One Red Lockout Bar
    One Green Lockout Bar
    Two Lock Mounts
    Alcohol Prep Pad    		OSHA Compliant 29 CFR 1910.147
    		7517N11000000
     

    Pin-Out DIN-Rail Mount Circuit Breaker Lockouts

    Image of ProductInUse. Front orientation. Lockouts. Pin-Out DIN-Rail Mount Circuit Breaker Lockouts.
    Image of Product. Front orientation. Lockouts. Pin-Out DIN-Rail Mount Circuit Breaker Lockouts.
    Image of Attribute. Switch. Front orientation. ZoomedIn view. Contains Annotated, Border. Lockouts. Pin-Out DIN-Rail Mount Circuit Breaker Lockouts.

    Switch

    With pins that stick into the holes inside your switch housing, these lockouts are more secure than clamp-on lockouts. They’ll secure tie bars, too—attach them to just one of the switches to lock out the whole thing. Lock them with a padlock to prevent accidental flips during maintenance. These lockouts help you comply with OSHA 29 CFR 1910.147 requirements for the control of electrical circuits to prevent injuries.
    Overall
    For Switch
    Inside Wd.
    For Max. No.
    of Padlocks
    For Max. Padlock
    Shackle Dia.
    Circuit Breaker
    Lockout Type
    For Circuit Breaker Pole Type
    For Circuit Breaker
    Switch Type
    For Mfr.
    Lg.
    Wd.
    Dp.
    Color
    Label
    Included
    Specs. Met
    Each
    Lockout Cover
     
    Plastic
    3/8"19/32"Pin OutSingle Pole, Tie Bar MultipoleThrough HoleABB, Allen Bradley, Buschmat, Clipsal, E-T-A, FAZ, Hager, Kapp, Legrand, Merlin Gerin, Proteus, Wylex1 3/4"15/16"15/16"RedNoOSHA Compliant 29 CFR 1910.147
    		7243A11000000
     
    back to top