Lock out electrical panels, switches, and other power sources to keep machinery off during repairs.

Ideal for circuit breakers and other electrical equipment, these hasps are made of nonconductive plastic to prevent shocks. Use them to lock out controls to keep machinery off while completing repairs.

These have a chain to attach to equipment so they won't get lost.

Like two lockout hasps in one, there's a jaw at each end with different clearances for added versatility.

Made of plastic, these hasps limit the risk of shock when you’re locking out electrical equipment. They have a holder for a disposable lockout tag to alert others to repairs.

With a fold-over clasp design, these hasps shut tight enough that picks and other tools can't pry them open.

In addition to an overlapping hasp that interlocks when closed, lockouts have a chain that attaches to equipment so they won't get lost.

These lockouts plug into standard two- and three-prong plugs and lock with keys so the plug can't be used.

A lockout for every style of circuit breaker switch—these lockouts clamp over your switch, so it doesn’t matter if it has a through hole.

From a single point, lock out multiple breaker switches—these lockouts wrap around an entire tie bar so it won’t budge. Compared to clamp-on lockouts, they’re more secure.

Snap these bars into place to block circuit breaker switches from being flipped—even large, high-voltage switches. They attach to mounts on either side of your switch to physically block its movement.

More secure than clamp-on lockouts, these lockouts have pins that slot into the holes on your switch housing from the outside. They’ll secure switches connected by a tie bar, too—attach them to just one of the switches to lock out all of the switches connected to the tie bar.

With pins that stick into the holes inside your switch housing, these lockouts are more secure than clamp-on lockouts. They’ll secure tie bars, too—attach them to just one of the switches to lock out the whole thing.

Each lockout rotates into itself, making installation in tight spaces easier than other lockouts.

Stop gas and fluid valve handles from opening and closing during maintenance.

Close your valve, remove the handle, and store the handle in the lockout's zippered pouch. The lockout fits around the pipe, covers the valve stem, and secures the pouch's zipper to prevent valve operation.

Lock out most valves in your facility with just one device. These lockouts clamp onto a variety of valve handwheels and handles.

Lock out panel boxes, multiple gate valves, and oversized controls with a pinch.

More secure than standard lockout cables, these lockouts clamp to a surface nearby, giving you a fixed point to pull the cable tight. Since the body of the lockout doesn’t hang freely like on standard lockout cables, their cable stays taut.

Mount near machines your team is repairing to lock them out with fewer padlocks.

Block air hoses from connecting to compressed air. These lockouts secure with a padlock and lockout tag so your equipment doesn't start up during repairs.

Lock out the on/off or emergency-stop buttons on machinery to prevent accidental or unauthorized startups, such as during maintenance.

Prohibit access to the main valve on a gas cylinder.

Padlock these lockouts over the ends of battery cables to keep forklifts, pallet jacks, and other machinery powered off during maintenance.

Block access to your entire panel during maintenance and repairs. With these lockouts, you don’t have to spend time locking out individual breakers or fussing with traditional lockout cables.

Wrap these lockouts around levers on battery disconnect switches and other disconnect switches.

Keep everything you need to lock out most electrical equipment and valves around your facility in a single spot against the wall. These sets have supplies for locking out circuit breakers, valves, plugs, wall switches, and other controls.

Lock out nearly any power source or supply line in your facility, from circuit breakers and valve handles to wall switches and air hose. These sets include padlocks, hasps, and other lockouts in a carrying case—just grab them and go.

Each lockout rotates into itself, making installation in tight spaces easier than other lockouts.

Everything you need to safely lock out nearly every valve in your facility—these sets include adjustable ball valve and wheel lockouts along with a universal and cable lockout to tackle unusually shaped valves.

Everything you need to lock out your electrical equipment or valves. These sets are your one stop shop for padlocks, hasps, and other lockout devices.

Locks have a vertical shackle clearance that's greater than 1” and include a Danger label as well as a write-on label marked Property of. Padlocks come in a variety of colors for lockout identification compliance. Choose these locks if you need locks that each open with a different key.

Eye catching and visually distinct from typical padlocks, these padlocks come in a variety of colors that are useful for lockout identification practices.

Fit the extra-long shackle of these padlocks around oversized hasps and chains to lock out equipment outdoors. They come in a variety of colors that catch your eye and display a warning label that alerts you to locked-out machines.

Lock out equipment outdoors to prevent accidental startups during maintenance. These padlocks come in a variety of eye-catching colors that stand out from regular padlocks.

Useful for lockout identification practices, these padlocks come in a variety of colors to catch your eye. Choose them if you need several locks that open with the same key.

With an extra-long shackle, these padlocks can secure equipment locked out by oversized hasps, chains, and other devices. They come in a variety of eye-catching colors.

Made from corrosion-resistant materials, these padlocks lock out equipment outdoors and come in a variety of bold colors that stand out from regular padlocks. Choose these padlocks if you need several locks that open with the same key.

Weave the shackle on these padlocks through lockouts on outdoor valves, electrical panels, or other equipment during repairs without the hassle of extra cables or padlocks. To alert others to the maintenance, they have a warning label and come in a variety of striking colors.

Alert others to locked-out equipment—these padlocks come in a variety of colors that will stand out from a typical padlock. A long, flexible shackle simplifies your lockout process by replacing the need for a separate cable and padlock. Weave the shackle through multiple hasps or lockouts.

Snake the shackle on these padlocks through lockouts on outdoor valves, electrical panels, or other equipment during repairs—no extra cables or padlocks needed. These padlocks come in a variety of eye-catching colors and include a warning label that alerts others to the maintenance.

Remind workers to use lockout devices and procedures to prevent unexpected machine startups during maintenance and repair work.

Add a photo in the self-laminating square to identify the employee working a job.

Wrap these labels around padlocks to comply with lockout/tagout procedures.

Add lockout symbols to an existing label or use alone to provide lockout reminders at a glance.

Communicate dangers near equipment that could cause injury.

Remind your team to lock out machines during maintenance work to avoid accidental startups.

Cover a steering wheel to communicate when equipment is out of service.

Communicate dangers to workers near moving equipment that could cause injury.

Identify confined spaces that require authorized permit-only entry.

Notify workers of electrical hazards such as arc flashes, buried cable, and high-voltage equipment.

The illustrations on these signs help you identify electrical hazards at a glance.